Fire resistance tests for service installations - Part 15: 1-, 2-, 3- sided ducts

This Part of EN 1366 specifies a method for determining the fire resistance of horizontal 1-, 2- or 3-sided ventilation ducts and ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall (where ducts are located in cavities enclosed by fire-resistant shafts or ceilings). The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
This test method does not take into consideration the effect of spalling or deflection of the adjoining floor/wall.
This test method is only applicable to ventilation ducts that have passed the test for the appropriate time period according to EN1366-1 (Duct A and B) in vertical and horizontal orientations.
The test specimens should not incorporate access panels, these are tested in accordance with EN1366-1.

Feuerwiderstandsprüfungen für Installationen - Teil 15: 1-, 2- oder 3-seitige Lüftungsleitungen

Essais de résistance au feu des installations techniques - Partie 15 - Conduits de ventilation à 1, 2 ou 3 côtés

Preizkusi požarne odpornosti za napeljave - 15. del: 1-, 2- in 3-stranski kanali

General Information

Status
Not Published
Public Enquiry End Date
19-Feb-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Dec-2023
Due Date
24-Apr-2024

Buy Standard

Draft
prEN 1366-15:2024
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1366-15:2024
01-februar-2024
Preizkusi požarne odpornosti za napeljave - 15. del: 1-, 2- in 3-stranski kanali
Fire resistance tests for service installations - Part 15: 1-, 2-, 3- sided ducts
Feuerwiderstandsprüfungen für Installationen - Teil 15: 1-, 2- oder 3-seitige
Lüftungsleitungen
Essais de résistance au feu des installations techniques - Partie 15 - Conduits de
ventilation à 1, 2 ou 3 côtés
Ta slovenski standard je istoveten z: prEN 1366-15
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
oSIST prEN 1366-15:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1366-15:2024

---------------------- Page: 2 ----------------------
oSIST prEN 1366-15:2024


DRAFT
EUROPEAN STANDARD
prEN 1366-15
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2023
ICS
English Version

prEN 1366-15 'Fire resistance tests for service
installations - Part 15: 1-, 2-, 3- sided ducts'
 Feuerwiderstandsprüfungen für Installationen - Teil
15: 1-, 2-, 3-seitige Leitungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 127.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1366-15:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1366-15:2024
prEN 1366-15:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test equipment . 7
5 Test conditions . 8
6 Test specimen . 8
7 Installation of test specimen . 10
8 Conditioning . 11
9 Application of instrumentation . 12
10 Test procedure .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.