SIST EN 4880:2023
(Main)Aerospace series - General technical specification for standard parts
Aerospace series - General technical specification for standard parts
This document specifies the minimum requirements for the qualification, acceptance, delivery and
inspection of standard parts by the aerospace industry and its manufacturers.
This document is valid for standard parts and their assemblies as described in a product standard, if
mentioned therein. This specification can also be applied to other parts when specifically invoked by
the terms of delivery.
Parts/sections of this document are not applicable in cases where the product standard stipulates
requirements that differ from this specification.
Luft- und Raumfahrt - Allgemeine technische Spezifikationen für Normteile
Série aérospatiale - Spécification technique générale pour les pièces standard
Aeronavtika - Splošna tehnična specifikacija za standardizirane dele
Ta dokument določa minimalne zahteve za kvalifikacijo, sprejetje, dobavo in pregled standardiziranih delov v letalski in vesoljski industriji ter s strani njihovih proizvajalcev.
Ta dokument se uporablja za standardizirane dele in njihove sestave, kot je opisano v standardu za izdelek, če je tam navedeno. Ta specifikacija se lahko uporablja tudi za druge dele, če se na to posebej sklicujejo pogoji dobave.
Deli/razdelki tega dokumenta se ne uporabljajo v primerih, kadar standard za izdelek določa zahteve, ki se razlikujejo od te specifikacije.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4880:2023
01-november-2023
Aeronavtika - Splošna tehnična specifikacija za standardizirane dele
Aerospace series - General technical specification for standard parts
Luft- und Raumfahrt - Allgemeine technische Spezifikationen für Normteile
Série aérospatiale - Spécification technique générale pour les pièces standard
Ta slovenski standard je istoveten z: EN 4880:2023
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 4880:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4880:2023
---------------------- Page: 2 ----------------------
SIST EN 4880:2023
EN 4880
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 49.035
English Version
Aerospace series - General technical specification for
standard parts
Série aérospatiale - Spécification technique générale Luft- und Raumfahrt - Allgemeine technische
pour les pièces normalisées Lieferbedingung für Normteile
This European Standard was approved by CEN on 3 March 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4880:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4880:2023
EN 4880:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 Production engineering . 5
4.2 Materials . 5
4.3 Performance requirements . 5
4.4 Workmanship . 5
4.5 Interchangeability . 5
4.6 Marking . 5
4.7 Protective finish . 6
4.8 Acceptance test report . 6
4.9 Standard ambient test conditions .
...
SLOVENSKI STANDARD
oSIST prEN 4880:2020
01-oktober-2020
Aeronavtika - Splošna tehnična specifikacija za standardizirane dele
Aerospace series - General technical specification for standard parts
Luft- und Raumfahrt - Allgemeine technische Spezifikationen für Normteile
Série aérospatiale - Spécification technique générale pour les pièces standard
Ta slovenski standard je istoveten z: prEN 4880
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
oSIST prEN 4880:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4880:2020
---------------------- Page: 2 ----------------------
oSIST prEN 4880:2020
DRAFT
EUROPEAN STANDARD
prEN 4880
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS 49.035
English Version
Aerospace series - General technical specification for
standard parts
Série aérospatiale - Spécification technique générale Luft- und Raumfahrt - Allgemeine technische
pour les pièces standard Spezifikationen für Normteile
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4880:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4880:2020
prEN 4880:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 Production engineering . 5
4.2 Materials . 5
4.3 Performance requirements . 5
4.4 Workmanship . 5
4.5 Interchangeability . 5
4.6 Marking . 6
4.7 Protective treatment and surface finish (protective finish) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.