iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12663-1:2010/FprA1:2014

(Amendment)

Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

This amendment specifies structural strength requirements due to lifting and jacking for the whole vehicle structure.

Bahnanwendungen - Festigkeitsanforderungen an Wagenkästen von Schienenfahrzeugen - Teil 1: Lokomotiven und Personenfahrzeuge (und alternatives Verfahren für Güterwagen)

Applications ferroviaires - Prescriptions de dimensionnement des structures de véhicules ferroviaires - Partie 1: Locomotives et matériels roulants voyageurs (et méthode alternative pour wagons)

Železniške naprave - Konstrukcijske zahteve za grode železniških vozil - 1. del: Lokomotive in potniška železniška vozila (tudi alternativna metoda za tovorne vagone)

General Information

Status
Not Published
Public Enquiry End Date
10-Aug-2014
ICS
45.060.20 - Trailing stock
Technical Committee
IŽNP - Reilway applications
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
08-Oct-2019
Due Date
13-Oct-2019
Completion Date
08-Oct-2019
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
EN 12663-1:2010/FprA1 - Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

Relations

Consolidated By
SIST EN 12663-1:2010+A1:2015 - Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
Effective Date
18-Jan-2023
Amends
SIST EN 12663-1:2010 - Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
Effective Date
01-Jul-2014
Consolidated By
SIST EN 12663-1:2010+A1:2015 - Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
Effective Date
19-Jan-2023
Consolidated By
SIST EN 12663-1:2010+A1:2015 - Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
Effective Date
01-Feb-2015

Buy Standard

EN 12663-1:2010/FprA1:2014EN 12663-1:2010/FprA1:2014
PreviousNext
Draft
EN 12663-1:2010/FprA1:2014
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12663-1:2010/FprA1:2014
01-julij-2014
Železniške naprave - Konstrukcijske zahteve za grode železniških vozil - 1. del:
Lokomotive in potniška železniška vozila (tudi alternativna metoda za tovorne
vagone)
Railway applications - Structural requirements of railway vehicle bodies - Part 1:
Locomotives and passenger rolling stock (and alternative method for freight wagons)
Bahnanwendungen - Festigkeitsanforderungen an Wagenkästen von
Schienenfahrzeugen - Teil 1: Lokomotiven und Personenfahrzeuge (und alternatives
Verfahren für Güterwagen)
Applications ferroviaires - Prescriptions de dimensionnement des structures de véhicules
ferroviaires - Partie 1: Locomotives et matériels roulants voyageurs (et méthode
alternative pour wagons)
Ta slovenski standard je istoveten z: EN 12663-1:2010/FprA1
ICS:
45.060.20 Železniški vagoni Trailing stock
SIST EN 12663-1:2010/FprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12663-1:2010/FprA1:2014

---------------------- Page: 2 ----------------------

SIST EN 12663-1:2010/FprA1:2014

EUROPEAN STANDARD
FINAL DRAFT
EN 12663-1:2010
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2014
ICS 45.060.20
English Version
Railway applications - Structural requirements of railway vehicle
bodies - Part 1: Locomotives and passenger rolling stock (and
alternative method for freight wagons)
Applications ferroviaires - Prescriptions de Bahnanwendungen - Festigkeitsanforderungen an
dimensionnement des structures de véhicules ferroviaires - Wagenkästen von Schienenfahrzeugen - Teil 1:
Partie 1: Locomotives et matériels roulants voyageurs (et Lokomotiven und Personenfahrzeuge (und alternatives
méthode alternative pour wagons) Verfahren für Güterwagen)
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 12663-1:2010. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12663-1:2010/FprA1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12663-1:2010/FprA1:2014
EN 12663-1:2010/FprA1:2014 (E)
Contents Page
Foreword .3
1 Modification to Clause 2, Normative references .4
2 Modifications to Clause 5, Structural requirements .4
3 Modifications to Clause 6, Design load cases .4

2

---------------------- Page: 4 ----------------------

SIST EN 12663-1:2010/FprA1:2014
EN 12663-1:2010/FprA1:2014 (E)
Foreword
This document (EN 12663-1:2010/FprA1:2014) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
NOTE Due to fact that the Framework Partnership Agreement between the Commission and CEN &
CENELEC is not signed yet, there are currently no New Approach Consultants in place for 2014. Therefore
the provisions of CEN-CENELEC Guide 15 cannot be met.
This shall not prevent the processing of draft standards nor the offering of harmonized standards to the
Commission. In particular, draft standards can be sent to vote without Consultant assessment.
This note will be removed from the Foreword of the finalized publication.

3

---------------------- Page: 5 ----------------------

SIST EN 12663-1:2010/FprA1:2014
EN 12663-1:2010/FprA1:2014 (E)
1 Modification to Clause 2, Normative references
Add:
"EN 16404:2014, Railway applications — Re-railing and recovery requirements for railway vehicles".
2 Modifications to Clause 5, Structural requirements
Add in 5.1 after indent c):
"d) loads due to re-rai
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16116-1:2022(Main)
Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, vans and locomotives
EN 16116-1:2022

This European Standard specifies the minimum ergonomic and structural integrity requirements for steps and handrails used by railway staff to access passenger vehicles, luggage vans, locomotives and power units of rolling stock. It also applies to passenger-rated car carriers.
This European Standard defines the required spaces necessary for shunter handrails and shunter’s stand and gives references for the required spaces necessary for handling of screw couplings with side buffers. For staff access, it defines footsteps, handrails and their dimensions and free spaces. To fulfil the requirements for loads which are applied by the staff, it defines dimensions and requirements for materials or design loads.
It also defines the general requirements of steps and handrail for access to external equipment, for example windscreens, wipers or external lights.
This European Standard does not cover on track machines (mobile railway infrastructure construction and maintenance equipment) and tram-trains.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16334-1:2014+A1:2022(Main)
Railway applications - Passenger Alarm System - Part 1: System requirements for mainline rail
EN 16334-1:2014+A1:2022

This European Standard specifies the characteristics of the Passenger Alarm System. The aim of the Passenger Alarm System is to:
a)   permit passengers in case of emergency situations to inform the driver;
b)   permit the driver to keep the train moving or to stop the train at a safe location;
c)   stop the train automatically:
1)   at a platform,
2)   if there is no acknowledgement by the driver.
This European Standard covers the Passenger Alarm System (PAS) fitted to the passenger carrying rolling stock and specifies:
-   the functional requirements for an alarm triggered in the driving cab (Clause 6);
-   the communication channel between the driver and passengers or on-board staff (6.4);
-   the dynamic analysis of the Passenger Alarm System (Clause 7);
-   the requirements for the degraded modes management (Clause 8);
-   the safety related requirements (Clause 9);
-   requirements for the Passenger Alarm Device and Passenger Alarm Device area (Clause 10).
This European Standard is applicable to rolling stock which are in the field of the Directive 2008/57/EC.
NOTE 1   Existing Passenger Alarm Systems may require modification to work in conjunction with vehicles that comply with this standard.
NOTE 2   Most of the requirements of UIC 541–6 are compliant with this standard.
Other communications systems named 'communication device for passengers' or 'call for aid' in the CR LOC and PAS TSI [1] are not covered by this standard.
NOTE 3    prEN 16683, Railway applications Call for aid and communication device Requirements covers these aspects.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14752:2020+A1:2022(Main)
Railway applications - Bodyside entrance systems for rolling stock
EN 14752:2019+A1:2021

This document applies to passenger body side entrance systems of all newly designed railway vehicles such as tram, metro, suburban, mainline and high-speed trains that carry passengers. The requirements of this document also apply to existing vehicles undergoing refurbishment of the door equipment, as far as it is reasonably practicable.
This document also specifies the requirements for testing of entrance systems.
This document makes reference to manual and power operated entrance systems. For manual doors, clauses referring to power operation are not applicable.
This document does not apply to the following:
-   entrance systems for equipment access, inspection or maintenance purposes and for crew only use;
-   doors on freight wagons; and
-   doors or hatches specifically provided for escape under emergency conditions.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15528:2022(Main)
Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
EN 15528:2021

This European Standard is applicable to the lines with standard track gauge (1435°mm) and wider track gauges of the heavy rail system and the vehicles that are operated on these lines, except portable trolleys as defined by EN 13977 and maintenance vehicles (e.g. rail mounted plant, cranes) in their working or travelling modes (see EN 14033-2).
This European Standard describes methods of classification of existing and new lines of the heavy rail system and the categorisation of rail vehicles.
This European Standard gives guidance to a reliable and established management of the interface between rail vehicles and the heavy rail network and does not impose any requirements on either vehicles or infrastructure.
The application of this European standard enables to ensure the static route compatibility between a rail vehicle and the heavy rail network with respect to the vertical load carrying capacity.
It contains requirements relevant to:
- classification of the vertical load carrying capacity of lines of the heavy rail network;
- allocation of rail vehicles to line categories (categorisation);
- determination of payload limits of freight wagons.
Out of the scope of this European standard are
- assessments of compatibility based on the parameter axle load alone;
- compatibility checks for cases where an additional dynamic analysis is required (for example according to EN 1991-2:2003, 6.4.4);
- requirements relating to the maximum total mass or maximum length of a train;
- the system used in Great Britain, where all lines and vehicles are classified in accordance with the RA (Route Availability) System. A guide to the equivalent categories in accordance with this European Standard is given in Annex M;
- the publication of line categories.
The requirements of this European Standard do not replace any regulations related to running behaviour of vehicles described by the assessment quantities for running safety, track loading and ride characteristics (see EN 14363).

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16116-2:2021(Main)
Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
EN 16116-2:2021

This document specifies the minimum requirements for ergonomic and structural integrity of steps and handrails used together to give staff access to freight wagons. It does not cover ladders, top platforms and top gangways.
It defines in particular the required spaces necessary for shunter handrails, for shunter’s stand, for steps and handrails.
This document also defines their dimensions, positions, limits for durability and functionality.
It also defines the general requirements for the access to tail lights for freight wagons.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17285:2020(Main)
Railway applications - Acoustics - Measuring of door audible warnings
EN 17285:2020

This European standard describes the type test assessment method for acoustic signals at passenger external doors applying to rolling stock. The following applies to this standard: - this standard refers to acoustical passenger information indicating the release, opening and closing of passenger doors; - this standard is applicable to tonal signals with defined frequency components; - this standard is not applicable to spoken information.
NOTE 1   Acoustic door signals in terms of TSI compliance are defined in EN 16584-2 "Design for PRM use".
NOTE 2   Acoustic doors signals in terms of door system function are described in EN 14752.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16334-2:2020(Main)
Railway applications - Passenger alarm system - Part 2: System requirements for urban rail
EN 16334-2:2020

This document specifies the characteristics of the Passenger Alarm System (PAS) for Urban Rail.
This document covers the PAS fitted to the passenger carrying Urban Rail rolling stock and specifies:
-   the safety related requirements;
-   the functional requirements of PAS triggered by pasasengers;
-   the requirements for the communication channel between passengers and the driver or OCC;
-   the requirements for the functional behaviour of the PAS;
-   the requirements for the degraded modes management;
-   the requirements for the Passenger Alarm Device (PAD) and PAD area.
This document is applicable to the categories I to III of Urban Rail rolling stock defined in CEN/CLC Guide 26:
-   (I) metros;
-   (II) trams;
-   (III) light rail.
NOTE 1   CEN/CLC Guide 26 defines Metro, Tram and Light Rail as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
NOTE 2   The PAS function on existing vehicles may require modification to work in conjunction with vehicles that comply with this document.
NOTE 3   This European Standard covers urban rail rolling stock, both with or without a driver.
NOTE 4   For rolling stock devoted to suburban passenger services, this European Standard applies when the TSIs do not apply.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16922:2018+A1:2019(Main)
Railway applications - Ground based services - Vehicle waste water discharge equipment
EN 16922:2017+A1:2019

This European Standard specifies the interface requirements for controlled emission toilet equipment on railway vehicles and the infrastructure, including catering area sink waste retention tanks. Vehicle and infrastructure specific requirements are also given.
The European Standard includes fixed and portable infrastructure equipment used to empty retention tanks, but excludes equipment fitted to railway vehicles where no fixed connections are used between vehicle and infrastructure.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15877-1:2012+A1:2019(Main)
Railway applications - Marking on railway vehicles - Part 1: Freight wagons
EN 15877-1:2012+A1:2018

This European Standard identifies the information required to be marked on freight wagons, or parts of freight wagons, relating to their technical, operational and maintenance characteristics. It defines the characteristics of these markings, the requirements pertaining to their presentation, their shape and position on a vehicle and their meaning. Some markings are accompanied with a note(s) where appropriate.  
Tank barrel manufacturers’ design criteria, test and product specification plates have not been considered in this European Standard as they are specified in EN 12561-1:2011, Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods.  
Dangerous Goods markings have not been considered in this European Standard where fully specified in RID (dimensions, colour, location and form). Where markings are not fully specified in RID they are included in this standard

  • Standard
    140 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16989:2018(Main)
Railway applications - Fire protection on railway vehicles - Fire behaviour test for a complete seat
EN 16989:2018

This draft European Standard sets out a test protocol to determine the burning behaviour of a rail vehicle seat design using a set of complete seats prepared and tested according to the procedures given in this document. It also sets out a standardized procedure to assess a seat’s potential for vandalization. This draft European Standard describes:
-   fire test method;
-   test equipment specification;
-   protocol for test specification procedure;
-   vandalization procedure;
-   calibration procedure.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day