oSIST prEN ISO/ASTM 52951:2025

Additive Manufacturing - Data - Data packages for AM parts (ISO/ASTM DIS 52951:2025)

This document provides the methods, parameter sets and models to develop and utilize a data package for a part created using AM technologies (AM part).  This document is scoped to the information requirements associated with workflow of the fabrication of an AM part, from design to acceptance.   Peripheral information related to entities such as organization, facility, operator, security, and others is addressed for sake of completeness; but is not the focus of this document and can be defined elsewhere.   This document provides the means to develop an organizational or application-specific data package for the communication between and amongst the designer, the manufacturer, and all acceptance authorities, among other potential stakeholders.  
This document does not impose a plan of execution to produce an AM part, though a digital thread is provided to establish a referenceable information workflow.
The requirements set forth in this document are based on the fabrication of a part using the PBF-LB/M process.  While specific details directly relate to PBF-LB/M, generalized workflow requirements can be related to any AM process.

Additive Fertigung - Daten - Datenpakete für additiv gefertigte Teile (ISO/ASTM DIS 52951:2025)

Fabrication additive - Données - Paquets de données pour pièces de FA (ISO/ASTM DIS 52951:2025)

[Not translated]

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Aug-2025
• ICS: 25.030 - Additive manufacturing
• Technical Committee: VAR - Welding
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 11-Jun-2025
• Due Date: 29-Oct-2025
• Ref Project: prEN ISO/ASTM 52951 - Additive Manufacturing - Data - Data packages for AM parts (ISO/ASTM DIS 52951:2025)

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2025
[Not translated]
Additive Manufacturing - Data - Data packages for AM parts (ISO/ASTM DIS
52951:2025)
Additive Fertigung - Daten - Datenpakete für additiv gefertigte Teile (ISO/ASTM DIS
52951:2025)
Fabrication additive - Données - Paquets de données pour pièces de FA (ISO/ASTM DIS
52951:2025)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52951
ICS:
25.030 3D-tiskanje Additive manufacturing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/ASTM DIS 52951
ISO/TC 261
Additive Manufacturing — Data —
Secretariat: DIN
Data packages for AM parts
Voting begins on:
Fabrication additive — Données — Paquets de données pour
2025-06-04
pièces FA
Voting terminates on:
ICS: 25.030 2025-08-27
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
© ISO/ASTM International 2025
ISO/ASTM DIS 52951:2025(en)
DRAFT
ISO/ASTM DIS 52951:2025(en)
International
Standard
ISO/ASTM DIS 52951
ISO/TC 261
Additive Manufacturing — Data —
Secretariat: DIN
Data packages for AM parts
Voting begins on:
Fabrication additive — Données — Paquets de données pour
pièces FA
Voting terminates on:
ICS: 25.030
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
© ISO/ASTM International 2025
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
USER PURPOSES, DRAFT INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
BE CONSIDERED IN THE LIGHT OF THEIR
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
ISO copyright office ASTM International
NATIONAL REGULATIONS.
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
RECIPIENTS OF THIS DRAFT ARE INVITED
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
TO SUBMIT, WITH THEIR COMMENTS,
Phone: [phone] Phone: [phone]
NOTIFICATION OF ANY RELEVANT PATENT
Fax: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail] Email: [e-mail]
Website: www.iso.org Website: www.astm.org
Published in Switzerland Reference number
© ISO/ASTM International 2025
ISO/ASTM DIS 52951:2025(en)
© ISO/ASTM International 2025 – All rights reserved
ii
ISO/ASTM DIS 52951:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Significance and use . 2
5 Method for data package development . 3
5.1 General .3
5.2 Identifying the application scenario and associated data package requirements .3
5.3 Using modules for data package configuration .4
5.4 Determining level of specificity by setting requirements control .4
5.5 Establishing configuration management practices .6
5.6 Creating a data package .7
6 General requirements . 8
6.1 Production qualification .8
6.1.1 Facility qualification .8
6.1.2 Machine qualifications .9
6.2 Security considerations .10
6.2.1 General .10
6.2.2 Prevention of part sabotage .10
6.2.3 Validation that part is not counterfeit .11
6.2.4 Data traceability .11
6.3 Quality control plan .11
6.4 Customer information . 12
6.5 User information . 12
7 Feedstock material requirements .12
7.1 General . 12
7.2 Material handling and storage . 12
7.3 Material data (Feedstock) . 13
7.4 Material data (Specification or allowable) . 13
8 Part requirements . .13
8.1 Reference AM workflow and digital thread . 13
8.2 AM workflow by stages . 15
8.2.1 AM design .16
8.2.2 Pre-process (Machine independent) .17
8.2.3 Pre-process (machine dependent) .19
8.2.4 Build process . 22
8.2.5 Post process . 23
9 Inspection requirements .26
10 End delivery requirements .28
11 Configuration of data package modules .29
11.1 Acquisition configuration . 29
11.2 Manufacture in house . 30
11.3 Verification only . 30
12 Data package requirements template . .31
Annex A (informative) Design and production data package guidance .32
Annex B (informative) Data security considerations .34
Annex C (informative) Configuration management examples .39

© ISO/ASTM International 2025 – All rights reserved
iii
ISO/ASTM DIS 52951:2025(en)
Bibliography .46

© ISO/ASTM International 2025 – All rights reserved
iv
ISO/ASTM DIS 52951:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this do
...