SIST EN ISO 8665:2007
(Main)Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006)
Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006)
This International Standard specifies the requirements additional to ISO 15550 for determining the power of marine propulsion reciprocating internal combustion (RIC) engines when presented for documenting and checking of the declared (rated) power published by the manufacturer. This International Standard applies to engines used for propulsion of recreational craft and other small craft of up to 24 m hull length. This International Standard is to be used in conjunction with ISO 15550.
Kleine Wasserfahrzeuge - Schiffsantriebs-Hubkolben-Verbrennungsmotoren - Leistungsmessungen und Leistungsangaben (ISO 8665:2006)
Diese Internationale Norm legt Anforderungen in Ergänzung zu ISO 15550 fest, um die Vortriebsleistung in Wasser von Hubkolben-Verbrennungsmotoren (RIC) zu bestimmen die zur Dokumentation vorgestellt werden und um die vom Hersteller angegebene Leistung zu überprüfen.
Diese Internationale Norm gilt für Motoren, die zum Antrieb von Freizeitfahrzeugen und anderen kleinen Wasserfahrzeugen mit einer Rumpflänge bis 24 m eingesetzt werden.
Diese Internationale Norm muss in Verbindung mit der Basisnorm ISO 15550 angewandt werden.
ANMERKUNG Für die Leistungsbestimmung der Abgasemissionsprüfungen nach ISO 8178 gelten die Anforderungen nach ISO 14396.
Petits navires - Moteurs marins de propulsion alternatifs a combustion interne - Mesurage et déclaration de la puissance (ISO 8665:2006)
L'ISO 8665:2006 spécifie les caractéristiques complémentaires à l'ISO 15550 afin de déterminer la puissance des moteurs alternatifs à combustion interne (RIC, de l'anglais "reciprocating internal combustion") en vue de figurer dans une documentation et de vérifier la puissance déclarée (nominale) publiée par le fabricant.
Elle est applicable aux moteurs utilisés pour la propulsion des navires de plaisance et autres petits navires dont la longueur de coque est inférieure ou égale à 24 m.
Elle est destinée à être appliquée conjointement avec l'ISO 15550.
Mala plovila - Batni motorji z notranjim zgorevanjem za pogon ladij/čolnov - Merjenje moči in deklariranje (ISO 8665:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8665:2007
01-januar-2007
1DGRPHãþD
SIST EN ISO 8665:2000
SIST EN ISO 8665:2000/A1:2001
0DODSORYLOD%DWQLPRWRUML]QRWUDQMLP]JRUHYDQMHP]DSRJRQODGLMþROQRY
0HUMHQMHPRþLLQGHNODULUDQMH ,62
Small craft - Marine propulsion reciprocating internal combustion engines - Power
measurements and declarations (ISO 8665:2006)
Kleine Wasserfahrzeuge - Schiffsantriebs-Hubkolben-Verbrennungsmotoren -
Leistungsmessungen und Leistungsangaben (ISO 8665:2006)
Petits navires - Moteurs marins de propulsion alternatifs a combustion interne -
Mesurage et déclaration de la puissance (ISO 8665:2006)
Ta slovenski standard je istoveten z: EN ISO 8665:2006
ICS:
47.020.20
47.080
SIST EN ISO 8665:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 8665
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2006
ICS 47.080 Supersedes EN ISO 8665:1995
English Version
Small craft - Marine propulsion reciprocating internal combustion
engines - Power measurements and declarations (ISO
8665:2006)
Petits navires - Moteurs marins de propulsion alternatifs à Kleine Wasserfahrzeuge - Schiffsantriebs-Hubkolben-
combustion interne - Mesurage et déclaration de la Verbrennungsmotoren - Leistungsmessungen und
puissance (ISO 8665:2006) Leistungsangaben (ISO 8665:2006)
This European Standard was approved by CEN on 24 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8665:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 8665:2006 (E)
Foreword
This document (EN ISO 8665:2006) has been prepared by Technical Committee ISO/TC 188
"Small craft" in collaboration with Technical Committee CEN/SS T01 "Shipbuilding and maritime
structures", the secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2006, and conflicting national
standards shall be withdrawn at the latest by December 2006.
This document supersedes EN ISO 8665:1995.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 8665:2006 has been approved by CEN as EN ISO 8665:2006 without any
modifications.
2
---------------------- Page: 3 ----------------------
EN ISO 8665:2006 (E)
ANNEX ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25EC as amended by Directive
2003/44/EC
This European Standard has been prepared under a mandate given to CEN by the European
Commission to provide one means of conforming to Essential Requirements of the New Approach
Directive 94/25/EC as amended by Directive 2003/44/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and
has been implemented as a national standard in at least one Member State, compliance with the
normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this
standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 94/25/EC
as amended by Directive 2003/44/EC
Clauses/Sub-clause(s) of Essential Requirements (ERs) of Qualifying remarks/Notes
this European Standard EU Directive 94/25/EC as amended
by Directive 2003/44/EC
All Annex I; A, Clause 4 Propulsion engine power is to be
measured in accordance with this
Annex I; B, Clause 4, b
standard.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
3
---------------------- Page: 4 ----------------------
INTERNATIONAL ISO
STANDARD 8665
Third edition
2006-06-01
Small craft — Marine propulsion
reciprocating internal combustion
engines — Power measurements
and declarations
Petits navires — Moteurs marins de propulsion alternatifs à combustion
interne — Mesurage et déclaration de la puissance
Reference number
ISO 8665:2006(E)
©
ISO 2006
---------------------- Page: 5 ----------------------
ISO 8665:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 8665:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8665 was prepared by Technical Committee ISO/TC 188, Small craft.
This third edition cancels and replaces the second edition (ISO 8665:1994), which has been technically
revised.
© ISO 2006 – All rights re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.