Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 5: Measurement of transmittance properties of UV protective coatings (ISO/TS 19392-5:2023)

This document specifies a test method to measure the ultraviolet (UV) and visible (VIS) spectral transmittance  in  the  wavelength  range  from  280  nm  to  700  nm  of  coatings  for  wind  turbine  rotor  blades. Single and multilayer coatings or coating systems can be tested.
From the spectral transmittance the transmittance of UV, VIS and the combined UV and VIS wavelength range can be calculated.
It is applicable to free coatings films or coatings applied on a UV-transparent quartz substrate.

Beschichtungsstoffe - Beschichtungssysteme für Rotorblätter von Windenergieanlagen - Teil 5: Messung der Transmissionseigenschaften von UV-Schutzbeschichtungen (ISO/TS 19392-5:2023)

Matériaux de revêtement pour pales de turbines éoliennes - Partie 5: Mesurage des propriétés du facteur de transmission des revêtements de protection anti UV (ISO/TS 19392-5:2023)

Barve in laki - Premazni sistemi za lopatice rotorjev vetrnih turbin - 5. del: Merjenje transmitance zaščitnih premazov proti UV svetlobi (ISO/TS 19392-5:2023)

General Information

Status
Not Published
Public Enquiry End Date
02-May-2024
Technical Committee
Current Stage
5520 - Unique Acceptance Procedure (UAP) (Adopted Project)
Start Date
04-Mar-2024
Due Date
22-Jul-2024
Completion Date
14-May-2024

Buy Standard

Draft
kTS FprCEN ISO/TS 19392-5:2024
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TS FprCEN ISO/TS 19392-5:2024
01-april-2024
Barve in laki - Premazni sistemi za lopatice rotorjev vetrnih turbin - 5. del: Merjenje
transmitance zaščitnih premazov proti UV svetlobi (ISO/TS 19392-5:2023)
Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 5:
Measurement of transmittance properties of UV protective coatings (ISO/TS 19392-
5:2023)
Beschichtungsstoffe - Beschichtungssysteme für Rotorblätter von Windenergieanlagen -
Teil 5: Messung der Transmissionseigenschaften von UV-Schutzbeschichtungen
(ISO/TS 19392-5:2023)
Matériaux de revêtement pour pales de turbines éoliennes - Partie 5: Mesurage des
propriétés du facteur de transmission des revêtements de protection anti UV (ISO/TS
19392-5:2023)
Ta slovenski standard je istoveten z: FprCEN ISO/TS 19392-5
ICS:
87.040 Barve in laki Paints and varnishes
kSIST-TS FprCEN ISO/TS 19392-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN ISO/TS 19392-5:2024

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN ISO/TS 19392-5:2024
TECHNICAL ISO/TS
SPECIFICATION 19392-5
First edition
2023-03
Paints and varnishes — Coating
systems for wind-turbine rotor
blades —
Part 5:
Measurement of transmittance
properties of UV protective coatings
Matériaux de revêtement pour pales de turbines éoliennes —
Partie 5: Mesurage des propriétés du facteur de transmission des
revêtements de protection anti UV
Reference number
ISO/TS 19392-5:2023(E)
© ISO 2023

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN ISO/TS 19392-5:2024
ISO/TS 19392-5:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 4 ----------------------
kSIST-TS FprCEN ISO/TS 19392-5:2024
ISO/TS 19392-5:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials .2
5.1 Film applicator for coating material . 2
5.2 Substrate for free coating film preparation . 2
5.2.1 Preparation of free film and test specimen . 2
5.2.2 Coating application . . 3
5.3 Film thickness measurement . 3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.