SIST EN ISO 9046:2005
(Main)Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002)
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002)
This International Standard specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used in joints in building construction.
Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen bei konstanter Temperatur (ISO 9046:2002)
Diese Internationale Norm legt ein Verfahren zur Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen mit vorwiegend plastischem Verhalten fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.
Construction immobiliere - Produits pour joints - Détermination des propriétés d'adhésivité/cohésion des mastics a température constante (ISO 9046:2002)
La présente Norme internationale spécifie une méthode pour la détermination des propriétés d’adhésivité /cohésion des mastics de comportement essentiellement plastique qui sont utilisés pour des joints dans la construction immobilière.
Gradnja objektov - Tesnilne mase - Ugotavljanje adhezijskih/kohezijskih lastnosti tesnilnih mas pri stalni temperaturi (ISO 9046:2002)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gradnja objektov - Tesnilne mase - Ugotavljanje adhezijskih/kohezijskih lastnosti tesnilnih mas pri stalni temperaturi (ISO 9046:2002)Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen bei konstanter Temperatur (ISO 9046:2002)Construction immobiliere - Produits pour joints - Détermination des propriétés d'adhésivité/cohésion des mastics a température constante (ISO 9046:2002)Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002)91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN ISO 9046:2004SIST EN ISO 9046:2005en01-februar-2005SIST EN ISO 9046:2005SLOVENSKI
STANDARDSIST EN 29046:19961DGRPHãþD
SIST EN ISO 9046:2005
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 9046
December 2004 ICS 91.100.50 Supersedes EN 29046:1990 English version
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002)
Construction immobilière - Produits pour joints - Détermination des propriétés d'adhésivité/cohésion des mastics à température constante (ISO 9046:2002)
Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen bei konstanter Temperatur (ISO 9046:2002) This European Standard was approved by CEN on 21 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9046:2004: ESIST EN ISO 9046:2005
EN ISO 9046:2004 (E)
2
Foreword
The text of ISO 9046:2002 has been prepared by Technical Committee ISO/TC 59 "Building construction” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 9046:2004 by CMC.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005.
This document supersedes EN 29046:1990.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 9046:2002 has been approved by CEN as EN ISO 9046:2004 without any modifications.
SIST EN ISO 9046:2005
INTERNATIONALSTANDARDISO9046Second edition2002-05-01Reference numberISO9046:2002(E)© ISO2002Building construction— Jointing products— Determination of adhesion/cohesion properties of sealants at constant temperatureConstruction immobilière— Produits pour joints— Détermination des propriétés d'adhésivité/cohésion des mastics à température constante
SIST EN ISO 9046:2005
ISO9046:2002(E)ii© ISO2002–All rights reservedPDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not beedited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameterswere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below.©ISO2002All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO'smember body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel.+ 41 22 749 01 11Fax+ 41 22 749 09 47E-mailcopyright@iso.chWebwww.iso.chPrinted in SwitzerlandSIST EN ISO 9046:2005
ISO9046:2002(E)© ISO2002–All rights reservediiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part3.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard require
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.