SIST EN 16556:2015
(Main)Adhesives - Determination of the open assembly time for thermoplastic wood adhesives for non-structural applications
Adhesives - Determination of the open assembly time for thermoplastic wood adhesives for non-structural applications
This European Standard specifies the test method for the determination of the open assembly time for thermoplastic wood adhesives for non-structural applications by tensile shear strength. It is carried out on standardised test pieces glued with increasing open times.
Klebstoffe - Bestimmung der offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen
Diese Europäische Norm legt das Prüfverfahren zur Bestimmung der offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen durch eine Zug-Scherprüfung fest. Die Prüfung wird an genormten Prüfkörpern ausgeführt, die mit zunehmenden offenen Wartezeiten verklebt wurden.
Adhésifs - Détermination du temps d'assemblage ouvert des adhésifs thermoplastiques pour bois pour applications non structurales
La présente Norme européenne spécifie la méthode d'essai qui permet de déterminer le temps d'assemblage ouvert des adhésifs thermoplastiques pour bois destinés à être utilisés dans le cadre d'applications non structurales, à partir de la résistance au cisaillement en traction. L'essai est réalisé sur des éprouvettes normalisées collées en utilisant des temps ouverts croissants.
Lepila - Ugotavljanje odprtega časa plastomernih lepil za les za nekonstrukcijsko uporabo
Ta evropski standard določa preskusno metodo za ugotavljanje odprtega časa montaže za plastomerna lepila za les za nekonstrukcijsko uporabo z ugotavljanjem natezne strižne trdnosti. Izvede se na standardiziranih preskusnih kosih, ki so lepljeni z naraščajočimi odprtimi časi.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHNRQVWUXNFLMVNRXSRUDERKlebstoffe - Bestimmung der offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende AnwendungenAdhésifs - Détermination du temps d'assemblage ouvert des adhésifs thermoplastiques pour bois pour applications non structuralesAdhesives - Determination of the open assembly time for thermoplastic wood adhesives for non-structural applications83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 16556:2014SIST EN 16556:2015en,fr,de01-januar-2015SIST EN 16556:2015SLOVENSKI
STANDARD
SIST EN 16556:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16556
November 2014 ICS 83.180 English Version
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications
Détermination du temps ouvert maximal des adhésifs thermoplastiques pour bois pour applications non structurales
Bestimmung der maximalen offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen This European Standard was approved by CEN on 20 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16556:2014 ESIST EN 16556:2015
EN 16556:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Symbols and abbreviations .4 5 Sampling .4 6 Principle .5 7 Apparatus .5 8 Procedure .5 8.1 General .5 8.2 Preparation of test pieces .5 8.3 Number of test pieces .6 8.4 Tensile shear test.6 9 Expression of results .8 10 Test report .9 Bibliography . 10 SIST EN 16556:2015
EN 16556:2014 (E) 3 Foreword This document (EN 16556:2014) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2015 and conflicting national standards shall be withdrawn at the latest by May 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. Safety statement Persons using this document should be familiar with the normal laboratory practice, if applicable. This document cannot address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. Environmental statement It is understood that some of the material permitted in this standard can have negative environmental impact. As technological advantages lead to better alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, it is recommended that the user of the standard take care to carry out an appropriate disposal of the wastes, according to local regulation. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16556:2015
EN 16556:2014 (E) 4 1 Scope This European Standard defines the test method for the determination of the maximum open time for thermoplastic wood adhesives for non-structural applications by tensile shear strength. It is carried out on standardized test pieces glued with increasing open times. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHNRQVWUXNFLMVNRXSRUDERKlebstoffe - Bestimmung der offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende AnwendungenAdhésifs - Détermination du temps d'assemblage ouvert des adhésifs thermoplastiques pour bois pour applications non structuralesAdhesives - Determination of the open assembly time for thermoplastic wood adhesives for non-structural applications83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:FprEN 16556kSIST prEN 16556:2014en,fr,de01-september-2014kSIST prEN 16556:2014SLOVENSKI
STANDARD
kSIST prEN 16556:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 16556
June 2014 ICS 83.180 English Version
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications
Détermination du temps ouvert maximal des adhésifs thermoplastiques pour bois pour applications non structurales
Bestimmung der maximalen offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 193.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 16556:2014 EkSIST prEN 16556:2014
FprEN 16556:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Symbols and abbreviations .4 5 Sampling .4 6 Principle .5 7 Apparatus .5 8 Procedure .5 8.1 General .5 8.2 Preparation of test pieces .5 8.3 Number of test pieces .6 8.4 Tensile shear test.6 9 Expression of results .8 10 Test report .9 Bibliography . 10
kSIST prEN 16556:2014
FprEN 16556:2014 (E) 3 Foreword This document (FprEN 16556:2014) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This document is currently submitted to the Formal Vote. Safety statement Persons using this document should be familiar with the normal laboratory practice, if applicable. This document cannot address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. Environmental statement It is understood that some of the material permitted in this standard can have negative environmental impact. As technological advantages lead to better alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, it is recommended that the user of the standard takes care to carry out an appropriate disposal of the wastes, according to local regulation. kSIST prEN 16556:2014
FprEN 16556:2014 (E) 4 1 Scope This European Standard defines the test method for the determination of the maximum open time for thermoplastic wood adhesives for non-structural applications by tensile shear strength. It is carried out on standardized test pieces glued with increasing open times. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923, Adhesives - Terms and definitions EN 1067, Adhesives - Examination an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.