Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications

This European Standard defines the test method for the determination of the maximum open time for thermoplastic wood adhesives for non-structural applications by tensile shear strength. It is carried out on standardized test pieces glued with increasing open times.

Bestimmung der maximalen offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen

Diese Europäische Norm legt das Prüfverfahren zur Bestimmung der maximalen offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen durch eine Zug-Scherprüfung fest. Die Prüfung wird an genormten Prüfkörpern ausgeführt, die mit zunehmenden offenen Wartezeiten verklebt wurden.

Détermination du temps ouvert maximal des adhésifs thermoplastiques pour bois pour applications non structurales

La présente Norme européenne spécifie la méthode d'essai qui permet de déterminer le temps ouvert maximal des adhésifs thermoplastiques pour bois destinés à être utilisés dans le cadre d'applications non structurales, à partir de la résistance au cisaillement en traction. L'essai est réalisé sur des éprouvettes normalisées encollées avec des temps ouverts croissants.

Lepila - Ugotavljanje odprtega časa plastomernih lepil za les za nekonstrukcijsko uporabo

Ta evropski standard določa preskusno metodo za ugotavljanje odprtega časa montaže za plastomerna lepila za les za nekonstrukcijsko uporabo z ugotavljanjem natezne strižne trdnosti. Izvede se na standardiziranih preskusnih kosih, ki so lepljeni z naraščajočimi odprtimi časi.

General Information

Status
Published
Publication Date
04-Nov-2014
Withdrawal Date
30-May-2015
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-Jul-2020

Buy Standard

Standard
EN 16556:2015
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k prEN 16556:2014
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHNRQVWUXNFLMVNRXSRUDERKlebstoffe - Bestimmung der offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende AnwendungenAdhésifs - Détermination du temps d'assemblage ouvert des adhésifs thermoplastiques pour bois pour applications non structuralesAdhesives - Determination of the open assembly time for thermoplastic wood adhesives for non-structural applications83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 16556:2014SIST EN 16556:2015en,fr,de01-januar-2015SIST EN 16556:2015SLOVENSKI
STANDARD



SIST EN 16556:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16556
November 2014 ICS 83.180 English Version
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications
Détermination du temps ouvert maximal des adhésifs thermoplastiques pour bois pour applications non structurales
Bestimmung der maximalen offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen This European Standard was approved by CEN on 20 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16556:2014 ESIST EN 16556:2015



EN 16556:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Symbols and abbreviations .4 5 Sampling .4 6 Principle .5 7 Apparatus .5 8 Procedure .5 8.1 General .5 8.2 Preparation of test pieces .5 8.3 Number of test pieces .6 8.4 Tensile shear test.6 9 Expression of results .8 10 Test report .9 Bibliography .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHNRQVWUXNFLMVNRXSRUDERKlebstoffe - Bestimmung der offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende AnwendungenAdhésifs - Détermination du temps d'assemblage ouvert des adhésifs thermoplastiques pour bois pour applications non structuralesAdhesives - Determination of the open assembly time for thermoplastic wood adhesives for non-structural applications83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:FprEN 16556kSIST prEN 16556:2014en,fr,de01-september-2014kSIST prEN 16556:2014SLOVENSKI
STANDARD



kSIST prEN 16556:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 16556
June 2014 ICS 83.180 English Version
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications
Détermination du temps ouvert maximal des adhésifs thermoplastiques pour bois pour applications non structurales
Bestimmung der maximalen offenen Wartezeit bei thermoplastischen Holzklebstoffen für nicht tragende Anwendungen This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 193.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 16556:2014 EkSIST prEN 16556:2014



FprEN 16556:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Symbols and abbreviations .4 5 Sampling .4 6 Principle .5 7 Apparatus .5 8 Procedure .5 8.1 General .5 8.2 Preparation of test pieces .5 8.3 Number of test pieces .6 8.4 Tensile shear test.6 9 Expression of results .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.