SIST EN 9103:2015/AC:2016

Aerospace series - Quality management systems - Variation management of key characteristics

This standard is primarily intended to apply to new parts and products, but can also be applied to parts currently in production. The standard shall be applicable to all production processes that influence the variation of KCs, as well as maintenance processes in which KCs are identified. It applies to assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product.
It does not apply to lab-scale, pilot, or pre-production processes. However, particular management of some KCs might be required using other methods than those described in the standard, during these phases of a programme, when required by the customer or deemed appropriate by the organization (e.g., Engineering department requirement).
The variation control process begins with product definition, typically an engineering drawing or specification which identifies KCs, and leads to a variation management program for those KCs. This process may also be used for producer-identified KCs.
Producers and their subcontractors shall be responsible for flow down of the requirements of the applicable revision of this standard to subcontractors, who produce design characteristics, and for ensuring that KCs conform to customer requirements.

Luft- und Raumfahrt - Qualitätsmanagementsystems - Management der Veränderung der Haupteigenshaften

Série aérospatiale - Systèmes de management de la qualité - Management de la variation des caractéristiques clefs

Aeronavtika - Sistemi vodenja kakovosti - Vodenje sprememb ključnih značilnosti

General Information

• Status: Withdrawn
• Publication Date: 08-Dec-2015
• Withdrawal Date: 29-Nov-2023
• ICS: 03.120.10 - Quality management and quality assurance
• ICS: 49.020 - Aircraft and space vehicles in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 29-Nov-2023
• Due Date: 22-Dec-2023
• Completion Date: 30-Nov-2023
• Ref Project: EN 9103:2014/AC:2015 - Aerospace series - Quality management systems - Variation management of key characteristics

Relations

• Corrects: SIST EN 9103:2015 - Aerospace series - Quality management systems - Variation management of key characteristics
• Effective Date: 01-Jan-2016
• Revises: SIST EN 9103:2024 - Aerospace series - Quality management systems - Variation management of key characteristics
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Qualitätsmanagementsystems - Management der Veränderung der HaupteigenshaftenSérie aérospatiale - Systèmes de management de la qualité - Management de la variation des caractéristiques clefsAerospace series - Quality management systems - Variation management of key characteristics49.020Letala in vesoljska vozila na splošnoAircraft and space vehicles in general03.120.10Vodenje in zagotavljanje kakovostiQuality management and quality assuranceICS:Ta slovenski standard je istoveten z:EN 9103:2014/AC:2015SIST EN 9103:2015/AC:2016en,fr,de01-januar-2016SIST EN 9103:2015/AC:2016SLOVENSKI
STANDARD



SIST EN 9103:2015/AC:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 9103:2014/AC
November 2015
Novembre 2015
November 2015 ICS 03.120.10; 49.020 English version Version Française Deutsche Fassung
Aerospace series - Quality management systems - Variation management of key characteristics
Série aérospatiale - Systèmes de management de la qualité - Management de la variation des caractéristiques clefs
Luft- und Raumfahrt - Qualitätsmanagementsyst
...