Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method (ISO 13936-3:2005)

This part of ISO 13936 describes a method for the determination of the resistance offered by the yarns of a woven fabric to slippage while being held in a needle clamp under conditions of stress. This method provides a means to negate variations introduced by seam preparation or sewing thread variation that can have a marked influence on test results. This method is not applicable to stretch fabrics or for industrial fabric, e.g. beltings.

Textilien - Bestimmung des Schiebewiderstandes von Garnen in einer Gewebenaht - Teil 3: Verfahren mit Nadelklemme (ISO 13936-3:2005)

Vorwort
Der Text von ISO 13936-3:2005 wurde vom Technischen Komitee ISO/TC 38 „Textil“ der Internationalen Organisation für Normung (ISO) erarbeitet und als EN ISO 13936-3:2007 durch das Technische Komitee CEN/TC 248 „Textilien und textile Erzeugnisse“ übernommen, dessen Sekretariat vom BSI gehalten wird.
Diese Europäische Norm muss den Status einer nationalen Norm erhalten, entweder durch Veröffentlichung eines identischen Textes oder durch Anerkennung bis August 2007, und etwaige entgegenstehende nationale Normen müssen bis August 2007 zurückgezogen werden.
Entsprechend der CEN/CENELEC-Geschäftsordnung sind die nationalen Normungsinstitute der folgenden Länder gehalten, diese Europäische Norm zu übernehmen: Belgien, Bulgarien, Dänemark, Deutschland, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Lettland, Litauen, Luxemburg, Malta, Niederlande, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, Schweiz, Slowakei, Slowenien, Spanien, Tschechische Republik, Ungarn, Vereinigtes Königreich und Zypern.
Anerkennungsnotiz
Der Text von ISO 13936-3:2005 wurde vom CEN als EN ISO 13936-3:2007 ohne irgendeine Abänderung genehmigt.
1Anwendungsbereich
Dieser Teil der ISO 13936 beschreibt ein Verfahren zur Bestimmung des Schiebewiderstandes von Garne in einer Gewebenaht, während diese in einer Nadelklemme unter Spannung gehalten wird.
Dieses Verfahren bietet die Möglichkeit, die durch die Nahtvorbereitung oder das Nähen der Naht eingetragenen Schwankungen aufzuheben, die einen spürbaren Einfluss auf die Prüfergebnisse haben können.
Dieses Verfahren ist weder für hochdehnbare Gewebe noch für technische Gewebe geeignet, z. B. Gurtwaren.
   Dieser Teil der ISO 13936 beschreibt ein Verfahren zur Bestimmung des Schiebewiderstandes von Garne in einer Gewebenaht, während diese in einer Nadelklemme unter Spannung gehalten wird.

Textiles - Détermination de la résistance au glissement des fils de couture dans les tissus - Partie 3: Méthode de la griffe (ISO 13936-3:2005)

L'ISO 13936-3:2005 décrit une méthode pour déterminer la résistance au glissement des fils d'un tissu maintenu sous contrainte dans une mâchoire à griffe.
L'ISO 13936-3:2005 fournit un moyen de supprimer les variables introduites par la préparation d'une couture ou par des variations du fil de couture, qui peuvent avoir une influence marquée sur les résultats d'essai.
L'ISO 13936-3:2005 n'est pas applicable aux étoffes élastiques ni aux étoffes industrielles, par exemple aux courroies.

Tekstilije - Ugotavljanje odpornosti prej proti drsenju ob šivu pri tkaninah - 3. del: Metoda z igelno prižemo (ISO 13936-3:2005)

General Information

Status
Published
Publication Date
01-Jul-2007
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Jun-2007
Due Date
20-Aug-2007
Completion Date
02-Jul-2007

Buy Standard

Standard
EN ISO 13936-3:2007
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13936-3:2007
01-julij-2007
Tekstilije - Ugotavljanje odpornosti prej proti drsenju ob šivu pri tkaninah - 3. del:
Metoda z igelno prižemo (ISO 13936-3:2005)
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics -
Part 3: Needle clamp method (ISO 13936-3:2005)
Textilien - Bestimmung des Schiebewiderstandes von Garnen in einer Gewebenaht - Teil
3: Verfahren mit Nadelklemme (ISO 13936-3:2005)
Textiles - Détermination de la résistance au glissement des fils de couture dans les
tissus - Partie 3: Méthode de la griffe (ISO 13936-3:2005)
Ta slovenski standard je istoveten z: EN ISO 13936-3:2007
ICS:
59.080.20 Preje Yarns
SIST EN ISO 13936-3:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13936-3:2007

---------------------- Page: 2 ----------------------

SIST EN ISO 13936-3:2007
EUROPEAN STANDARD
EN ISO 13936-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2007
ICS 59.080.30

English Version
Textiles - Determination of the slippage resistance of yarns at a
seam in woven fabrics - Part 3: Needle clamp method (ISO
13936-3:2005)
Textiles - Détermination de la résistance au glissement des Textilien - Bestimmung des Schiebewiderstandes von
fils de couture dans les tissus - Partie 3: Méthode de la Garnen in einer Gewebenaht - Teil 3: Verfahren mit
griffe (ISO 13936-3:2005) Nadelklemme (ISO 13936-3:2005)
This European Standard was approved by CEN on 21 January 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13936-3:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13936-3:2007
EN ISO 13936-3:2007 (E)






Foreword


The text of ISO 13936-3:2005 has been prepared by Technical Committee ISO/TC 38 "Textiles”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
13936-3:2007 by Technical Committee CEN/TC 248 "Textiles and textile products", the
secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2007, and conflicting national
standards shall be withdrawn at the latest by August 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


Endorsement notice

The text of ISO 13936-3:2005 has been approved by CEN as EN ISO 13936-3:2007 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13936-3:2007


INTERNATIONAL ISO
STANDARD 13936-3
First edition
2005-03-01

Textiles — Determination of the slippage
resistance of yarns at a seam in woven
fabrics —
Part 3:
Needle clamp method
Textiles — Détermination de la résistance au glissement des fils de
couture dans les tissus —
Partie 3: Méthode de la griffe





Reference number
ISO 13936-3:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 13936-3:2007
ISO 13936-3:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 13936-3:2007
ISO 13936-3:2005(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Principle . 2
5 Apparatus and materials . 2
6 Atmosphere for conditioning and testing . 3
7 Sampling and preparation of test specimens . 3
8 Test procedure . 5
9 Calculation and expression of results. 6
10 Test report . 8
Annex A (informative) Suggested procedure for sampling. 9
Annex B (informative) Example of pattern for cutting out test specimens from the laboratory
samples. 10
Annex C (informative) Alternative procedure for apparel fabrics . 11
Bibliography . 12

© ISO 2005 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 13936-3:2007
ISO 13936-3:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13936-3 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 24, Conditioning
atmospheres and physical tests for textile fabrics.
ISO 13936 consists of the following parts, under the general title Textiles — Determination of the slippage
resistance of yarns at a seam in woven fabrics:
 Part 1: Fixed seam opening method
 Part 2: Fixed load method
 Part 3: Needle clamp needle
iv © ISO 2005 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 13936-3:2007
INTERNATIONAL STANDARD ISO 13936-3:2005(E)

Textiles — Determination of the slippage resistance of yarns at
a seam in woven fabrics —
Part 3:
Needle clamp method
1 Scope
This part of ISO 13936 describes a method for the determination of the resistance offered by the yarns of a
woven fabric to slippage while being held in a needle clamp under conditions of stress.
This method provides a means to negate variations introduced by seam preparation or sewing thread variation
that can have a marked influence on test results.
This method is not applicable to stretch fabrics or for industrial fabric, e.g. beltings.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — Part 1:
Tension/compression testing machines — Verification and calibration of the force-measuring system
ISO 10012-1, Quality assurance requirements for measuring equipment — Part 1: Metrological confirmation
system for measuring equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
constant rate-of-extension testing machine
tensile testing machine having one clamp fixed whilst the other is moving with a constant speed throughout
the test where the entire testing system is virtually free from deflection
3.2
strip test
tensile test for which the full width of the test specimen is gripped in the jaws
© ISO 2005 – All rights reserved 1

---------------------- Page: 9 ----------------------

SIST EN ISO 13936-3:2007
ISO 13936-3:2005(E)
3.3
yarn slippage
movement in a woven fabric of weft yarns over warp yarn (or warp yarns over weft yarns) as a result of a
pulling action
NOTE Seam slippage is a fabric property not to be confused with seam strength.
3.4
warp slippage
slipping of warp yarns over weft yarns, during which the warp yarns are at right angles to the direction of pull
3.5
weft slippage
slipping of weft yarns over warp yarns, during which the weft yarns are at right angles to the direction of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.