iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12590:2000

(Main)

Textiles - Industrial sewing threads made wholly or partly from synthetic fibres

Textiles - Industrial sewing threads made wholly or partly from synthetic fibres

This European Standard specifies requirements for industrial sewing threads made wholly or partly from synthetic fibres. It specifies requirements for industrial sewing threads  based on breaking force in relation to the thread size. For threads which are for use in the garment trade it also specifies colour fastness and boiling water shrinkage requirements. It deals with industrial sewing threads made from the following substrates and combinations of substrates: a) Continuous filament polyester; b) Staple fibre polyester; c) Air-Jet textured polyester (see 3.3); d) False twist textured polyester (see 3.4);...

Textilien - Vollständig oder teilweise aus Chemiefasern hergestellte Industrienähgarne

Diese Europäische Norm legt Anforderungen an vollständig oder teilweise aus Chemiefasern hergestellte Industrienähgarne fest. Sie legt Anforderungen für Industrienähgarne fest, denen das Verhältnis von Bruchkraft zu Garnfeinheit zugrunde liegt. Für Nähgarne zur Verwendung in der Konfektion werden auch die Anforderungen an die Farbechtheit und den Kochschrumpf festgelegt. Sie bezieht sich auf Industrienähgarne, die aus den folgenden Faserstoffen und Faserstoffkombinationen hergestellt werden: a) Polyesterfilamente; b) Polyesterspinnfasern; c)luftdüsentexturiertes Polyester (siehe 3.3);...

Textiles - Fils a coudre industriels composés uniquement ou partiellement de fibres synthétiques

La présente norme européenne spécifie des exigences pour les fils a coudre industriels constitués en totalité ou en partie de fibres synthétiques. Elle prescrit les exigences des fils a coudre industriels sur la base de la relation entre la force de rupture et le titre du fil. La présente norme prescrit également les exigences relatives a la solidité des couleurs et a la rétraction en eau bouillante pour les fils utilisés dans le commerce de l'habillement. Elle concerne les fils a coudre industriels composés des matériaux suivants éventuellement combinés: a) filaments continus de polyester; b) polyester a fibres discontinues;...

Tekstilije - Industrijski šivalni sukanci iz sintetičnih ali delno sintetičnih vlaken

General Information

Status
Published
Publication Date
30-Jun-2000
ICS
59.080.20 - Yarns
Technical Committee
ITEK - Textile and textile products
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2000
Due Date
01-Jul-2000
Completion Date
01-Jul-2000
Ref Project
EN 12590:1999 - Textiles - Industrial sewing threads made wholly or partly from synthetic fibres

Buy Standard

EN 12590:2000EN 12590:2000
PreviousNext
Standard
EN 12590:2000
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Textilien - Vollständig oder teilweise aus Chemiefasern hergestellte IndustrienähgarneTextiles - Fils a coudre industriels composés uniquement ou partiellement de fibres synthétiquesTextiles - Industrial sewing threads made wholly or partly from synthetic fibres59.080.20PrejeYarnsICS:Ta slovenski standard je istoveten z:EN 12590:1999SIST EN 12590:2000en01-julij-2000SIST EN 12590:2000SLOVENSKI
STANDARD



SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 2061:2015(Main)
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015)
EN ISO 2061:2015

This International Standard specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method.
This International Standard is applicable to
a) single yarns (spun and filament),
b) plied yarns, and
c) cabled yarns.
Separate procedures are given for each type of yarn. The method is designed primarily for yarns in
packages, but, with special precautions, the procedures can be used for yarns taken from fabrics. It is not suitable for the determination of twist in a monofilament.
NOTE See also ISO 1890, which was prepared especially for the needs of glass textile technology, and ISO 7211-4.
This International Standard covers the determination of twist in plied and cabled yarns as follows:
a) in plied yarns: the final twist of the plied yarns and the original twist of the single yarn before
plying;
b) in cabled yarns:
— the final cabling twist of the yarn;
— the original twist of the plied yarn after plying, but prior to the last stage of processing;
— the twist of the single yarn before plying.
If desired, the twist of single and plied yarn components, as they lie in the final structure, can be
determined by the special procedure given in 10.5.7.
This International Standard is not applicable, except by agreement, to yarns which stretch more than 0,5 % when the tension increases from 0,5 cN to 1,0 cN per unit linear density of the yarn expressed in tex. Such yarns can be tested under special conditions of tension which are accepted by all parties interested in the test results.
This International Standard is not suitable for products of open-end spinning and intermingled
(interlaced) multifilament yarns.
This International Standard is not applicable to yarns which are too large to permit their being placed in the clamps of the testing apparatus without crushing or distortion severe enough to affect the test results.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2062:2010(Main)
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
EN ISO 2062:2009

This International Standard specifies methods for the determination of the breaking force and elongation at break of textile yarns taken from packages. Four methods are given: - A: manual; specimens are taken directly from conditioned packages; - B: automatic; specimens are taken directly from conditioned packages; - C: manual; relaxed test skeins are used after conditioning; - D: manual; specimens are used after wetting. Method C is used in cases of dispute regarding elongation at break of the yarn. This International Standard specifies methods using constant rate of specimen extension (CRE) tensile testers. Testing on the now obsolete constant rate of travel (CRT) and constant rate of loading (CRL) instruments is covered, for information, in Annex A, in recognition of the fact that these instruments are still in use and can be used by agreement. This International Standard applies to all types of yarns, except glass, elastomeric, aramid, high molecular polyethylene (HMPE), ultra high molecular polyethylene (UHMPE), ceramic and carbon yarns and polyolefin tape. This International Standard is applicable to yarns from packages but can be applied to yarns extracted from fabrics, subject to agreement between the interested parties. This International Standard is intended for the single-end (single-strand) testing of yarns.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13936-3:2007(Main)
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method (ISO 13936-3:2005)
EN ISO 13936-3:2007

This part of ISO 13936 describes a method for the determination of the resistance offered by the yarns of a woven fabric to slippage while being held in a needle clamp under conditions of stress. This method provides a means to negate variations introduced by seam preparation or sewing thread variation that can have a marked influence on test results. This method is not applicable to stretch fabrics or for industrial fabric, e.g. beltings.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14621:2006(Main)
Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
EN 14621:2005

This European Standard specifies test methods for quality control of textured and non textured multifilament synthetic yarns. It includes the following test methods:
-   determination of the crimp contraction - textured multifilament yarn with linear density up to 500 dtex;
-   determination of the hot air shrinkage - for non textured and textured multifilament yarns;
-   determination of the boiling water shrinkage - for non textured and textured multifilament yarns.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13936-2:2004(Main)
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO 13936-2:2004)
EN ISO 13936-2:2004

ISO 13936-2:2004 is intended for the determination of the resistance offered by thread systems of woven fabric, to slippage at a sewn seam.
The method described is suitable for all apparel and upholstery woven fabrics, stretch fabrics (including those containing elastomeric yarn).

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13936-1:2004(Main)
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method (ISO 13936-1:2004)
EN ISO 13936-1:2004

ISO13936-1:2004 is intended for the determination of the resistance offered by thread systems of woven fabric, to slippage at a sewn seam.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 10132:1999(Main)
Textiles -- Textured filament yarn -- Definitions
ISO 10132:1993

Establishes 14 terms and definitions for characteristics of textured filament yarns.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard – translation
    4 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 8159:1999(Main)
Textiles -- Morphology of fibres and yarns -- Vocabulary
ISO 8159:1987

Defines the principal terms used to described the various forms into which textile fibres can be assembled, up to and including cabled yarns. Only contains terms of general application. Terms and/or definitions which are specific to particular fibres (such as hemp, silk, textile glass, metal fibre, carbon fibre, etc) are excluded.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard – translation
    6 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 8160:1999(Main)
Textiles -- Textured filament yarns -- Vocabulary
ISO 8160:1987

Names the various types of textured filament yarn and defines them in relation to the processes by which they are produced.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard – translation
    4 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12422:1999(Main)
Sisal twines
EN 12422:1999

This European standard specifies the essential characteristics of sisal twines. It specifies the way they are manufactured, methods for testing and the manner in which they are designated and presented commercially. This standard does not specify agricultural twines which are made from sisal. These twines are specified according to EN 25080:1993.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day