Analogue audio recording on video tape - Polarity of magnetization

Applies to audio recording and processing, and gives requirements for the preservation of signal polarity, together with methods of test which are not already included in other standards. It is based on, and consistent with, the relevant text in HD 483.2, and the connector applications standardized in HD 483.11 and HD 483.12.

Analoge Tonaufzeichnung auf Videoband - Polarität der Magnetisierung

Enregistrement audio-analogique sur bande vidéo - Polarité de magnétisation

Traite de l'enregistrement et du traitement audio. Donne des prescriptions relatives à la conservation de la polarité du signal, ainsi que les méthodes d'essai qui ne sont pas déjà contenues dans d'autres normes. Se base sur la EN HD 483.2 ainsi qu'aux applications relatives aux connecteurs normalisés des HD 483-11 et HD 483.12.

Analogue audio recording on video tape - Polarity of magnetization (IEC 61213:1993)

General Information

Status
Published
Publication Date
31-Mar-1999
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-1999
Due Date
01-Apr-1999
Completion Date
01-Apr-1999

Buy Standard

Standard
EN 61213:1999
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61213:1999
01-april-1999
Analogue audio recording on video tape - Polarity of magnetization (IEC
61213:1993)
Analogue audio recording on video tape - Polarity of magnetization
Analoge Tonaufzeichnung auf Videoband - Polarität der Magnetisierung
Enregistrement audio-analogique sur bande vidéo - Polarité de magnétisation
Ta slovenski standard je istoveten z: EN 61213:1994
ICS:
33.160.40 Video sistemi Video systems
SIST EN 61213:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

CEI
NORME
INTERNATIONALE IEC
1213
INTERNATIONAL
Première édition
STANDARD
First edition
1993-12
Enregistrement audio-analogique sur
bande vidéo -
Polarité de magnétisation
Analogue audio recording on
video tape -
Polarity of magnetization
Copyright — all rights reserved
© CEI 1993 Droits de reproduction réservés —
No pa rt of this publication may be reproduced or utilized in
Aucune partie de cette publication ne peut être reproduite ni
any form or by any means, electronic or mechanical,
utilisée sous quelque forme que ce soit et par aucun pro-
including photocopying and microfilm, without permission
cédé, électronique ou mécanique, y compris la photocopie et
in writing from the publisher.
les microfilms, sans l'accord écrit de l'éditeur.
Genève, Suisse
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission F
PRICE CODE
IEC MemAyHapopHaa 3nelrporexHH4ecKaa I{oMHCCHl
Pour prix, voir catalogue en vigueur

For price, see current catalogue

---------------------- Page: 2 ----------------------

1213©IEC:1993 — 3 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ANALOGUE AUDIO RECORDING
ON VIDEO TAPE -
POLARITY OF MAGNETIZATION
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use published in the form of standards, technical
3)
reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
International Standard IEC 1213 has been prepared by sub-committee 60B: Video
recording, of IEC technical committee 60: Recording.
The text of this standard is based on the following documents:
Report on voting
DIS
60B(CO)155 60B(00)164
rt
Full information on the voting for the approval of this standard can be found in the repo
on voting indicated in the above table.
Annex A is for information only.

---------------------- Page: 3 ----------------------

1213 © IEC: 1993 — 5 —
ANALOGUE AUDIO RECORDING
ON VIDEO TAPE -
POLARITY OF MAGNETIZATION
1 Scope
This International Standard applies to audio recording and processing, and gives
requirements for the preservation of signal polarity, together with methods of test which
are not already included in other standards.
It is based on, and consistent with, the relevant text in IEC 268-2, and the connector
applications standardized in IEC 268-11 and IEC 268-12.
NOTE - Polarity characteristics of audio transducers are dealt with in IEC 268-4, IEC 268-5 and IEC 268-9.
2 Normative references
The following normative documents contain provisions which, through reference in the
text, constitute provisions of this International Standard. At the time of publication, the
editions indicated were valid. All normative documents are subject to revision, and parties
to agreements based on this International Standard are encouraged to i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.