iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 62290-3:2020/AC:2020

(Corrigendum)

Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specification

Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specification

TAN - // IEC Corrigendum

Bahnanwendungen - Betriebsleit- und Zugsicherungssysteme für den städtischen schienengebundenen Personennahverkehr - Teil 3: Systembezogene Anforderungsspezifikation

Applications ferroviaires - Systèmes de contrôle/commande et de gestion des transports guidés urbains - Partie 3: Spécification des exigences système

Železniške naprave - Komandno-kontrolni sistemi za upravljanje urbanega prometa - 3. del: Sistemske zahteve - Popravek AC

General Information

Status
Published
Publication Date
10-Aug-2020
ICS
45.060.01 - Railway rolling stock in general
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Jul-2020
Due Date
13-Sep-2020
Completion Date
11-Aug-2020
Mandate
M/486 - Mandate for programming and standardisation addressed to the European standardisation bodies in the field of urban rail
Ref Project
EN IEC 62290-3:2019/AC:2020-07 - Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specification

Relations

Corrects
SIST EN IEC 62290-3:2020 - Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specifications
Effective Date
30-Jun-2020
Revised
oSIST prEN IEC 62290-3:2023 - Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specification
Effective Date
14-Mar-2023

Buy Standard

EN IEC 62290-3:2020/AC:2020EN IEC 62290-3:2020/AC:2020
PreviousNext
Corrigendum
EN IEC 62290-3:2020/AC:2020
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62290-3:2020/AC:2020
01-september-2020
Železniške naprave - Komandno-kontrolni sistemi za upravljanje urbanega
prometa - 3. del: Sistemske zahteve - Popravek AC
Railway applications - Urban guided transport management and command/control
systems - Part 3: System requirements specification
Bahnanwendungen - Betriebsleit- und Zugsicherungssysteme für den städtischen
schienengebundenen Personennahverkehr - Teil 3: Systembezogene
Anforderungsspezifikation
Applications ferroviaires - Systèmes de contrôle/commande et de gestion des transports
guidés urbains - Partie 3: Spécification des exigences système
Ta slovenski standard je istoveten z: EN IEC 62290-3:2019/AC:2020-07
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN IEC 62290-3:2020/AC:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62290-3:2020/AC:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62290-3:2020/AC:2020

EUROPEAN STANDARD EN IEC 62290-
3:2019/AC:2020-07
NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2020

ICS 45.060.01
English Version
Railway applications - Urban guided transport management and
command/control systems - Part 3: System requirements
specification
(IEC 62290-3:2019/COR1:2020)
Applications ferroviaires - Systèmes de contrôle/commande Bahnanwendungen - Betriebsleit- und
et de gestion des transports guidés urbains - Partie 3: Zugsicherungssysteme für den städtischen
Spécification des exigences système schienengebundenen Personennahverkehr - Teil 3:
(IEC 62290-3:2019/COR1:2020) Systembezogene Anforderungsspezifikation
(IEC 62290-3:2019/COR1:2020)
This corrigendum becomes
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62847:2023(Main)
Railway applications - Rolling stock - Electrical connectors - Requirements and test methods
EN IEC 62847:2023

This International Standard retains IEC 61984:2008 as the minimum performance requirements for railway rolling stock electrical connectors.
It identifies additional terms, test methods and performance requirements for single-pole and multipole connectors with rated voltages up to 1 000 V, rated currents up to 125 A per contact and frequencies below 3 MHz used for indoor and outdoor applications in railway rolling stock.
This International Standard does not cover:
- connectors with breaking capacity (CBCs) as defined in IEC 61984:2008, 3.2, because on board rolling stock connectors are not intended to be operated (i.e. mated and unmated) under load or when live, either by means of procedures or by the presence of interlocks, as required by IEC 61991;
- non-rewirable connectors as defined in IEC 61984:2008, 3.5;
- automatic couplers, due to their additional mechanical complexity and the need for more specific requirements and testing;
- inter-vehicle jumpers, as they are connector and cable assemblies whose characteristics depend on those of both elements. Inter-vehicle connectors within the limits set in the scope of this International Standard are therefore covered by the agreed choice of suitable mechanical and environmental characteristics as defined by Annex B, and suggested by Annex C.
This International Standard identifies the application levels for electrical connectors based on
a) the severity of the service conditions in different rolling stock technologies,
b) the intended use of the rolling stock,
c) the location of the connector in the rolling stock system.
This International Standard is not applicable to internal connections of electronic devices such as connectors for printed boards and rack-and-panel connectors.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50388-1:2022(Main)
Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability - Part 1: General
EN 50388-1:2022

This European Standard establishes requirements for the compatibility of rolling stock with infrastructure particularly in relation to:  –   co-ordination of protection principles between power supply and traction units, especially fault discrimination for short-circuits; –   co-ordination of installed power on the line and the power demand of trains; –   co-ordination of traction unit regenerative braking and power supply receptivity; –   co-ordination of harmonic behaviour. This European Standard deals with the definition and quality requirements of the power supply at the interface between traction units and fixed installations. This European Standard specifies the interface between rolling stock and electrical fixed installations for traction, in respect of the power supply system. The interaction between pantograph and overhead contact line is dealt with in EN 50367. The interaction with the “control-command” subsystem (especially signalling) is not dealt with in this standard. Requirements are given for TSI lines (both high speed and conventional) and classical lines. For classical lines, values, where given, are for the existing European networks. Furthermore the maximum values that are specified are applicable to the foreseen developments of the infrastructure of the Trans European rail networks. The following electric traction systems are within scope: –   railways; –   guided mass transport systems that are integrated with railways; –   material transport systems that are integrated with railways. This European Standard does not apply retrospectively to rolling stock already in service.  Information is given on electrification parameters such as to enable train operating companies to confirm, after consultation with the rolling stock manufacturers, that there will be no consequential disturbance on the electrification system.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50238-3:2022(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters
CLC/TS 50238-3:2022

For the purpose of demonstrating compatibility between rolling stock and axle counter detectors, this document defines the interference limits and evaluation methods to verify rolling stock emissions. Wheel sensors and crossing loops are not covered by this document.
This document gives recommended individual limits to be applied to establish compatibility between RST and all selected types of axle counter detectors, including any covered by national standards.
The list of selected types of axle counters and their limits for compatibility are drawn on the basis of established performance criteria. It is expected that the trend for newly signalled interoperable lines will be fitted with types that meet the compatibility limits published in the TSI CCS Interfaces Document (ERA/ERTMS/033281).
To ensure adequate operational availability, it is essential that the rolling stock complies with the defined limits; otherwise, the established availability of the valid output function of axle counter detectors may be compromised.
NOTE   The influences from metal parts or inductively coupled resonant circuits on the vehicle, eddy current brakes or magnetic brakes, are not covered by this document but are considered on the basis of national technical specifications.
For wheel sensors and wheel detectors in other applications than axle counters but utilizing the same rail sensors and detectors, transient and continuous interference can be considered as equivalent to axle counter detectors or axle counter sensors.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61375-2-8:2022(Main)
Electronic railway equipment - Train communication network (TCN) - Part 2-8: TCN conformance test
EN IEC 61375-2-8:2021

This part of IEC 61375 applies to all equipment and devices implemented according to
IEC 61375-2-3:2015, IEC 61375-2-5:2014 and IEC 61375-3-4:2014, i.e. it covers the
procedures to be applied to such equipment and devices when the conformance should be
proven.
The applicability of this document to a TCN implementation allows for individual conformance
checking of the implementation itself, and is a pre-requisite for further interoperability checking
between different TCN implementations.

  • Standard
    361 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61133:2022(Main)
Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
EN IEC 61133:2021

This International Standard specifies general criteria to demonstrate by testing that newly
constructed complete railway vehicles conform with standards or other normative documents.
This International Standard, as a whole or in part, applies to all railway vehicles except
special purpose vehicles such as track-laying machines, ballast cleaners and personnel
carriers. The extent of application of the standard for particular vehicles will be specifically
mentioned in the contract, to take account, where necessary, of any legislative requirements.
NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight,
powered trailer, etc.).
NOTE 2 The scope of this standard excludes railbound and road/rail vehicles for construction and maintenance of
railway infrastructure.
NOTE 3 This standard does not deal with tests carried out on components or equipment before fitting to the
vehicle.
In so far as this International Standard is applicable, it may be used for the following:
– generator sets mounted on a vehicle provided for auxiliary purposes;
– electrical transmission used on trolley buses or similar vehicles;
– control and auxiliary equipment of vehicles with non-electrical propulsion systems;
– vehicles guided, supported or electrically propelled by systems which do not use the
adhesion between wheel and rail.
NOTE 4 Specific technical requirements apply to vehicles which operate on the railways in the European Union.
The source of those requirements is given in Annex B. Where a European requirement applies to a given clause, a
note has been inserted at the end of the clause

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50546:2020/AC:2021(Corrigendum)
Railway applications - Rolling Stock - Three-phase shore (external) supply system for rail vehicles and its connectors
EN 50546:2020/AC:2021-09

This document specifies requirements for the shore supply system for auxiliaries and pre-conditioning and the related intermateable connector pairs. This standard specifies the characteristics of the connectors in order to achieve interoperability at the rolling-stock/shore power supply interface.
This document does not apply to shore supplies to move the rolling stock.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50155:2021(Main)
Railway applications - Rolling stock - Electronic equipment
EN 50155:2021

This document applies to all electronic equipment for control, regulation, protection, diagnostic, energy
supply, etc. installed on rail vehicles.
For the purpose of this document, electronic equipment is defined as equipment composed of electronic
components (e.g. resistors, capacitors, transistors, diodes, integrated circuits, hybrids, application
specific integrated circuits, wound components and relays), and recognized associated components
(e.g. connectors, mechanical parts). These components are mainly mounted on printed circuit boards.
Sensors (e.g. current, voltage, speed) and semiconductor drive units for power electronic devices are
covered by this standard. Complete semiconductor drive units and power converters are covered by
EN 61287-1.
This document covers the requirements for operating conditions, design, documentation, testing and
integration of electronic equipment, as well as hardware and software requirements considered
necessary for compliant and reliable equipment.
Specific requirements related to practices necessary to ensure defined safety integrity level or functional
safety are not covered by this document. Nevertheless, this document applies to the hardware of all
rolling stock electronic equipment or systems performing safety-related functions.
The software requirements for on-board railway equipment are specified by EN 50657.

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50718:2021(Main)
Guidelines for the use of EN 45545-2 for NiCd batteries on board rolling stock
CLC/TR 50718:2021

The scope of this document is to guide users of the EN 45545 series, particularly EN 45545 2:2013+A1:2015 and EN 45545 5:2013+A1:2015, in the application of these standards in designing and assessing NiCd batteries on board trains for their fire protection measures.
The scope of this document excludes any new requirements, considering only the requirements stated by the above listed standards.
However, EN 45545 being generic requirements and not specifically referred to NiCd batteries, this guide helps the application for those batteries.

  • Technical report
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50546:2020(Main)
Railway applications - Rolling Stock - Three phase shore (external) supply system for rail vehicles and its connectors
EN 50546:2020

The scope of this document is to define requirements for the shore supply system for auxiliaries and pre-conditioning and the related intermateable connector pairs.
Shore supplies to move the rolling stock are outside the scope of this document.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60077-4:2020(Main)
Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
EN IEC 60077-4:2019

In addition to the general requirements of IEC 60077-2, this part of IEC 60077 gives rules for
AC circuit-breakers, the main contacts of which are connected to AC overhead contact lines;
the nominal voltage of these circuits being in accordance with IEC 60850.
This document, together with IEC 60077-2, states specifically:
a) the characteristics of the circuit-breakers;
b) the service conditions with which circuit-breakers comply with reference to:
– operation and behaviour in normal service;
– operation and behaviour in short-circuit;
– dielectric properties;
c) the tests for confirming the compliance of the components with the characteristics under
the service conditions and the methods to be adopted for these tests;
d) the information to be marked on, or given with the circuit-breaker.
NOTE 1 Circuit-breakers which are dealt with in this document can be provided with devices for automatic
opening under pre-determined conditions other than those of overcurrent, for example, undervoltage and reversal
of power flow direction. This document does not deal with the verification of operation under such predetermined
conditions.
NOTE 2 The incorporation of electronic components or electronic sub-assemblies into electrotechnical components
is now common practice.
Although this document is not applicable to electronic equipment, the presence of electronic components does not
provide a reason to exclude such electrotechnical components from the scope.
Electronic sub-assemblies included in the circuit-breakers comply with the relevant standard for electronics
(IEC 60571).
NOTE 3 Certain of these rules, after agreement between the user and the manufacturer, are used for
electrotechnical components installed on vehicles other than rail rolling stock such as mine locomotives,
trolleybuses, etc. In this case, particular additional requirements can be necessary.
This document does not cover industrial circuit-breakers which comply with IEC 62271-100.
For these, in order to ensure satisfactory operation, this document is used to specify only the
particular requirements for rolling stock. In such cases, a specific document states the
additional requirements with which the industrial circuit-breakers comply, for example:
– either to be adapted (e.g. for control voltage, environmental conditions, etc.);
– or to be installed and used so that they do not have to endure specific rolling stock
conditions;
– or to be additionally tested to prove that these components can withstand satisfactorily the
rolling stock conditions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day