Oilseeds - Reduction of laboratory sample to test sample (ISO 664:1990)

Gives the requirements for four types of heat-shrinkable, flame- retarded, limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown below:
Class A: thin wall, shrink ratio 2:1, internal diameter up to 102,0 mm
Class B: medium wall, shrink ratio 2:1, internal diameter up to 60,0 mm
Class C: thick wall, shrink ratio 2:1, internal diameter up to 51,0 mm
Class D: medium wall, shrink ratio 3:1, internal diameter up to 40,0 mm
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Ölsamen - Verringerung der Laboratoriumsprobe auf die Untersuchungsprobe (ISO 664:1990)

Diese Internationale Norm legt das Verfahren fest, nach dem aus einer Laboratoriumsprobe von Ölsamen eine Untersuchungsprobe hergestellt wird. Anmerkung: Es gibt Handelsverträge für Ölsamen, die verlangen, daß die Probe so analysiert wird, wie sie entnommen wurde, d.h. einschließlich des möglicherweise vorhandenen Besatzes. Andere Verträge fordern dagegen eine vorherige quantitative Abtrennung des Besatzes und eine Analyse der gereinigten Samen. Außerdem kann eine Analyse des Besatzes gefordert werden.

Graines oléagineuses - Réduction de l'échantillon pour laboratoire en échantillon pour essai (ISO 664:1990)

Donne les prescriptions relatives à quatre types de gaines thermorétractables, retardées à la flamme, au risque de feu limité, ayant un indice de température de 105 °C, comme cela est indiqué ci-dessous.
Classe A:  paroi mince, rapport de rétreint 2:1, diamètre intérieur allant jusqu'à 102,0 mm
Classe B:  paroi moyenne, rapport de rétreint 2:1, diamètre intérieur allant jusqu'à 60,0 mm
Classe C  paroi épaisse, rapport de rétreint 2:1, diamètre intérieur allant jusqu'à 51,0 mm
Classe D: paroi moyenne, rapport de rétreint 3:1, diamètre intérieur allant jusqu'à 40,0 mm
Les matériaux qui sont conformes à cette spécification satisfont à des niveaux de performances établis. Cependant, il convient que le choix d'un matériau par un utilisateur et pour une application particulière soit fondé sur les prescriptions réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et non sur cette seule spécification.

Oljnice - Zmanjšanje laboratorijskega vzorca na preskusni vzorec (ISO 664:1990)

General Information

Status
Withdrawn
Publication Date
30-Sep-1996
Withdrawal Date
15-Jul-2008
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Jul-2008
Due Date
30-Jul-2008
Completion Date
16-Jul-2008

Relations

Buy Standard

Standard + National Annex and/or Foreword
EN ISO 664:1996
Foreword and/or annex in Slovenian language, body of the standard in English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.