Road restraint systems - Part 9: Impact tests and test methods for removable barrier sections

This document specifies performance, categories and test methods for the assessment of removable barrier sections.
The transitions between the Removable Barrier Section and the two connected safety barriers are outside the scope of this document
and should be assessed according to CEN/TR Transitions: _.
The present document should be read in conjunction with EN 1317-1:2010 and EN 1317-2 2:2010 and EN 1317-5:2007+A2:2012

Rückhaltesysteme an Straßen - Leistungsklassen, Abnahmekriterien für Anprallprüfungen und Prüfverfahren für leicht entfernbare Schutzeinrichtungsabschnitte

Dieses Dokument legt die Leistungsfähigkeit, Kategorien und Prüfverfahren für die Bewertung von herausnehmbaren Schutzeinrichtungsabschnitten fest.
Die Übergangskonstruktionen zwischen dem herausnehmbaren Schutzeinrichtungsabschnitt und den beiden verbundenen Schutzeinrichtungen liegen außerhalb des Anwendungsbereichs dieses Dokuments und werden nach FprCEN/TR 1317-10 bewertet.
Die Übergangskonstruktionen zwischen dem herausnehmbaren Schutzeinrichtungsabschnitt und den beiden verbundenen Schutzeinrichtungen liegen außerhalb des Anwendungsbereichs dieses Dokuments.

Dispositifs de retenue routiers - Essais de choc et méthodes d’essai pour les sections amovibles de barrière de sécurité

Ce document spécifie les performances, les catégories et les méthodes d’essai pour l’évaluation des sections de barrière amovibles.
Les raccordements entre la section de barrière amovible et les deux barrières de sécurité raccordées sortent du domaine d’application du présent document et sont évaluées à l’aide du FprCEN/TR 1317-10
Le présent document peut être lu conjointement avec l’EN 1317-1 :2010 et l’EN 1317-2 :2010 et l’EN 1317-5 :2007+A2 :2012.

Oprema cest - 9. del: Preskusni trki in preskusne metode za demontažne varnostne ograje

Ta dokument določa lastnosti, kategorije in preskusne metode za ocenjevanje odstranljivih elementov varnostnih ograj.
Prehodni elementi med odstranljivim elementom varnostne ograje in povezanima varnostnima ograjama so zunaj področja uporabe tega dokumenta; ocenijo naj se v skladu s poročilom CEN/TR Prehodni elementi: _.
Dokument je priporočljivo brati skupaj s standardi EN 1317-1:2010, EN 1317-2-2:2010 in EN 1317-5:2007+A2:2012.

General Information

Status
Published
Public Enquiry End Date
31-Jul-2023
Publication Date
13-Dec-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Dec-2023
Due Date
11-Feb-2024
Completion Date
14-Dec-2023

Relations

Buy Standard

Technical specification
TS CEN/TS 1317-9:2024
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Technical specification
TS CEN/TS 1317-9:2024
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 1317-9:2023
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 1317-9:2024
01-januar-2024
Nadomešča:
SIST ENV 1317-4:2002
Oprema cest - 9. del: Preskusni trki in preskusne metode za demontažne
varnostne ograje
Road restraint systems - Part 9: Impact tests and test methods for removable barrier
sections
Rückhaltesysteme an Straßen - Leistungsklassen, Abnahmekriterien für
Anprallprüfungen und Prüfverfahren für leicht entfernbare Schutzeinrichtungsabschnitte
Dispositifs de retenue routiers - Essais de choc et méthodes d’essai pour les sections
amovibles de barrière de sécurité
Ta slovenski standard je istoveten z: CEN/TS 1317-9:2023
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST-TS CEN/TS 1317-9:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 1317-9:2024

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 1317-9:2024


CEN/TS 1317-9
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

November 2023
TECHNISCHE SPEZIFIKATION
ICS 13.200; 93.080.30 Supersedes ENV 1317-4:2001
English Version

Road restraint systems - Part 9: Impact tests and test
methods for removable barrier sections
Dispositifs de retenue routiers - Essais de choc et Rückhaltesysteme an Straßen - Leistungsklassen,
méthodes d'essai pour les sections amovibles de Abnahmekriterien für Anprallprüfungen und
barrière de sécurité Prüfverfahren für leicht entfernbare
Schutzeinrichtungsabschnitte
This Technical Specification (CEN/TS) was approved by CEN on 4 September 2023 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 1317-9:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 1317-9:2024
CEN/TS 1317-9:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviations . 8
5 Performance under impact . 8
5.1 General. 8
5.2 Containment categories . 8
5.3 Impact severity . 9
5.4 Deformation of the RBS .
...

SLOVENSKI STANDARD
SIST-TS CEN/TS 1317-9:2024
01-januar-2024
Nadomešča:
SIST ENV 1317-4:2002
Oprema cest - 9. del: Merila za preskušanje ob naletu in preskusne metode za
odstranljive elemente varnostnih ograj
Road restraint systems - Part 9: Impact tests and test methods for removable barrier
sections
Rückhaltesysteme an Straßen - Leistungsklassen, Abnahmekriterien für
Anprallprüfungen und Prüfverfahren für leicht entfernbare Schutzeinrichtungsabschnitte
Dispositifs de retenue routiers - Essais de choc et méthodes d’essai pour les sections
amovibles de barrière de sécurité
Ta slovenski standard je istoveten z: CEN/TS 1317-9:2023
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST-TS CEN/TS 1317-9:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 1317-9:2024

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 1317-9:2024


CEN/TS 1317-9
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

November 2023
TECHNISCHE SPEZIFIKATION
ICS 13.200; 93.080.30 Supersedes ENV 1317-4:2001
English Version

Road restraint systems - Part 9: Impact tests and test
methods for removable barrier sections
Dispositifs de retenue routiers - Essais de choc et Rückhaltesysteme an Straßen - Leistungsklassen,
méthodes d'essai pour les sections amovibles de Abnahmekriterien für Anprallprüfungen und
barrière de sécurité Prüfverfahren für leicht entfernbare
Schutzeinrichtungsabschnitte
This Technical Specification (CEN/TS) was approved by CEN on 4 September 2023 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 1317-9:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 1317-9:2024
CEN/TS 1317-9:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviations . 8
5 Performance under impact . 8
5.1 General. 8
5.2 Containment categories . 8
5.3 Impact severity . 9
5.4 Deformation of the RBS .
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 1317-9:2023
01-julij-2023
Oprema cest - 9. del: Merila za preskušanje ob naletu in preskusne metode za
odstranljive elemente varnostnih ograj
Road restraint systems - Part 9: Impact tests and test methods for removable barrier
sections
Rückhaltesysteme an Straßen - Leistungsklassen, Abnahmekriterien für
Anprallprüfungen und Prüfverfahren für leicht entfernbare Schutzeinrichtungsabschnitte
Dispositifs de retenue routiers Essais de choc et méthodes dessai pour les sections
amovibles de barrière de sécurité
Ta slovenski standard je istoveten z: FprCEN/TS 1317-9
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
kSIST-TS FprCEN/TS 1317-9:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 1317-9:2023

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 1317-9:2023


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 1317-9
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

February 2023
ICS Will supersede ENV 1317-4:2001
English Version

Road restraint systems - Part 9: Impact tests and test
methods for removable barrier sections
Dispositifs de retenue routiers ¿ Essais de choc et Rückhaltesysteme an Straßen - Leistungsklassen,
méthodes d¿essai pour les sections amovibles de Abnahmekriterien für Anprallprüfungen und
barrière de sécurité Prüfverfahren für leicht entfernbare
Schutzeinrichtungsabschnitte


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 226.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 1317-9:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 1317-9:2023
FprCEN/TS 1317-9:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviations . 8
5 Performance under impact . 8
5.1 General. 8
5.2 Containment categories . 8
5.3 Impact severity . 9
5.4 Deformation of the RBS . 9
5.5 Connection force . 9
6 Test methods .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.