SIST EN 692:2006
(Main)Machine tools - Mechanical presses - Safety
Machine tools - Mechanical presses - Safety
1.1 This European Standard specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of mechanical presses with part revolution clutch hereinafter called presses which are intended to work cold metal or material partly of cold metal.
NOTE The design of a machine includes the study of the machine itself, taking into account all phases of its "life", i.e. construction, transport and commission (including assembly, installation and adjustment), use (including setting, teaching/programming or process changeover, operation, cleaning, fault finding and maintenance) and de-commissioning, dismantling and, as far as safety is concerned, disposal, and the drafting of the instructions related to all above-mentioned phases of the "life" of the machine (except construction), dealt with it in 6.5 of EN ISO 12100-2:2003.
1.2 This European Standard also covers presses, whose primary intended use is to work cold metal, which are to be used in the same way to work other sheet materials (such as cardboard, plastic, rubber or leather), and metal powder.
1.3 The requirements in this standard take account of intended use, as defined in 3.22 of EN ISO 12100-1:2003. This standard presumes access to the press from all directions, deals with the hazards during the various phases of the life of the machine described in clause 4, and specifies the safety measures for both the operator and other exposed persons.
1.4 This European Standard also applies to ancillary devices which are an integral part of the press. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately.
1.5 This European Standard does not cover mechanical presses with full revolution clutch.
Werkzeugmaschinen - Mechanische Pressen - Sicherheit
1.1 Diese Europäische Norm legt technische Sicherheitsanforderungen und -maßnahmen fest, die von Konstrukteuren (wie in 3.11 von EN 292-1:1991 definiert), Herstellern und Lieferanten von mechanischen Pressen mit kraftschlüssiger Kupplung für die Kaltbearbeitung von Metall oder teilweise aus kaltem Metall bestehenden Werkstoff anzuwenden sind.
ANMERKUNG Die Konstruktion einer Maschine beinhaltet die Betrachtung alle Phasen der Nutzungsdauer der Maschine. Dabei sind zu berücksichtigen, z. B. Konstruktion, Transport und Inbetriebsetzung (das beinhaltet auch den Aufbau, die Installation und Einstellung), der Produktionsbetrieb (dieser beinhaltet auch das Einrichten, Einfahren/Programmierung oder Umrüsten, Produktionsbetrieb, Reinigen, Fehlersuche und Instandsetzen) und Stilllegung, Abbau und, soweit Sicherheitsbelange betroffen sind, die Entsorgung und den Entwurf der Bedienungsanleitung in Bezug auf alle oben genannten Phasen der Nutzungsdauer der Maschine (ausgenommen Konstruktion), die in 6.5 von EN ISO 12100-2:2003 behandelt werden.
1.2 Diese Europäische Norm gilt auch für Pressen, deren ursprünglicher Verwendungszweck die Kaltbearbeitung von Metall ist und die in gleicher Weise für die Bearbeitung von anderem Material (wie Pappe, Kunststoff, Gummi oder Leder) oder Metallpulver eingesetzt werden sollen.
1.3 Die in dieser Norm enthaltenen Anforderungen beziehen die bestimmungsgemäße Verwendung mit ein, wie in 3.22 von EN ISO 12100-1:2003 definiert. Diese Norm unterstellt Zugang zur Presse von allen Seiten, behandelt die in Abschnitt 4 beschriebenen Gefährdungen während der mannigfaltigen Phasen der Nutzungsdauer der Maschine und legt die Sicherheitsmaßnahmen für den Bediener und andere exponierte Personen fest.
1.4 Diese Europäische Norm gilt auch für Zusatzeinrichtungen, die fester Bestandteil der Presse sind. Wenn für Maschinen, die Bestandteil eines Fertigungssystems sind, die Gefährdungen und auftretende Risiken vergleichbar mit separat arbeitenden Maschinen
Machines-outils - Presses mécaniques - Sécurité
1.1 La présente Norme européenne spécifie les exigences techniques de sécurité et les dispositions que doivent respecter les personnes chargées de la conception, de la construction et de la fourniture des presses mécaniques a embrayage a friction désignées ci-apres par le terme "presses" et qui sont conçues pour le travail a froid des métaux ou des matériaux partiellement constitués de métal froid.
NOTE La conception de la machine concerne l’étude la machine elle-meme, en tenant compte de toutes les phases de sa « vie », c’est-a-dire : sa construction, son transport et sa mise en service (y compris son assemblage, installation et sa mise au point), son utilisation (y compris le réglage, l’apprentissage/programmation ou le changement de processus de fabrication, le fonctionnement, le nettoyage, la recherche de défauts et la maintenance), sa mise hors service, son démontage et, dans la mesure ou la sécurité est concerné, sa mise au rebut et l’élaboration de la notice d’instructions relative a toutes les phases mentionnées ci-dessus de la « vie » de la machine (a l’exception de la construction) traitée en 6.5 de l’EN ISO 12100-2:2003.
1.2 La présente Norme européenne s'applique également aux presses dont l'utilisation normale premiere est le travail a froid des métaux et qui sont utilisées de la meme maniere pour le travail d'autres matériaux en feuilles (tels que le carton, le plastique, le caoutchouc ou le cuir), et de poudre métallique.
1.3 Les exigences de la présente Norme européenne tiennent compte de l'utilisation normale telle que définie en 3.22 de l'EN ISO 12100-1:1991. La présente norme suppose un acces possible a la presse de tous les côtés, traite des phénomenes dangereux pendant les différentes phases de la vie de la machine, décrits a l'article 4 et spécifie les exigences de sécurité a la fois pour l'opérateur et les autres personnes exposées.
Obdelovalni stroji – Mehanske stiskalnice – Varnost
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 692:2006
01-julij-2006
1DGRPHãþD
SIST EN 692:2000
Obdelovalni stroji – Mehanske stiskalnice – Varnost
Machine tools - Mechanical presses - Safety
Werkzeugmaschinen - Mechanische Pressen - Sicherheit
Machines-outils - Presses mécaniques - Sécurité
Ta slovenski standard je istoveten z: EN 692:2005
ICS:
25.120.10
SIST EN 692:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 692
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 25.120.10 Supersedes EN 692:1996
English Version
Machine tools - Mechanical presses - Safety
Machines-outils - Presses mécaniques - Sécurité Werkzeugmaschinen - Mechanische Pressen - Sicherheit
This European Standard was approved by CEN on 22 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 692:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 692:2005 (E)
Contents
page
1 Scope .5
2 Normative references .6
3 Terms and definitions.7
3.1 Terms and definitions.7
3.2 Abbreviations .10
4 List of significant hazards.11
5 Safety requirements and/or measures .14
5.1 Introduction.14
5.2 Basic design considerations.14
5.2.1 Brakes and clutches .14
5.2.2 Presses with part revolution clutches (friction clutches) .15
5.2.3 Hydraulic and pneumatic systems - Common features .15
5.2.4 Pneumatic systems.16
5.2.5 Hydraulic systems .16
5.2.6 Slide adjustment and stroke adjustment.16
5.3 Mechanical hazards in the tools area.17
5.4 The control and monitoring system .21
5.4.1 Control and monitoring functions .21
5.4.2 Part revolution clutch presses: redundancy and monitoring of clutch/brake control systems,
and overrun monitoring for single cycle use (see Tables 2, 3 and 4) .22
5.4.3 Muting .24
5.4.4 Programmable electronic systems (PES), programmable pneumatic systems (PPS) and safety
related functions .24
5.4.5 Selector switches.24
5.4.6 Isolation switch .25
5.4.7 Position switches (see 10.1.4 of EN 60204-1:1997) .25
5.4.8 Control devices .25
5.4.9 Valves .25
5.5 Tool-setting, trial strokes, maintenance and lubrication .26
5.6 Mechanical hazards - other .27
5.7 Slips, trips and falls .27
5.8 Protection against other hazards.27
5.8.1 Electrical hazards.27
5.8.2 Thermal hazards.28
5.8.3 High pressure fluid ejection hazards.28
5.8.4 Hazards generated by noise.28
5.8.5 Hazards generated by vibration.29
5.8.6 Hazards generated by materials and substances .29
5.8.7 Hazards generated by neglecting ergonomic principles .30
6 Verification of the safety requirements and/or measures.39
7 Information for use .47
7.1 Marking .47
7.2 Instruction handbook .48
Annex A (normative) Interlocking guards .50
A.1 Presses with part revolution clutches.50
Annex B (normative) Calculation of minimum safety distances .53
Annex C (informative) Electro-sensitive protective equipment (ESPE) using active opto-electronic
protective devices (AOPDs) .55
2
---------------------- Page: 3 ----------------------
EN 692:2005 (E)
Annex D (informative) Closed tools .56
Annex E (informative) The setting of the rotary cam arrangement .57
E.1 Basic features of the eccentric adjustment and rotary cam arrangement .57
E.2 Determination of the position where muting begins.63
Annex F (informative) Determination of the overall response time T.66
Annex G (normative) Conditions for noise measurement of mechanical presses .70
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive 98/79 EC .72
Bibliography .70
3
---------------------- Page: 4 ----------------------
EN 692:2005 (E)
Foreword
This document (EN 692:2005) has been prepared by Technical Committee CEN/TC 143 “Machine tools - Safety”,
the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by
April 2006.
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.
Annexes A, B and G to this standard are normative, whereas annexes C, D, E, F and ZA are informative.
Organisation contributing to the preparation of this European Standard include the European Manufacturer
Association CECIMO.
NOTE The safety requirements related to the use of PES or PPS will be dealt with at its next revision.
The European Standards produced by CEN/TC 143 are particular to machine-tools and complement the relevant A
and B standards on the subject of general safety (see introduction of EN 292-1:1991 for a description of A, B and C
standards).
This document supersedes EN 692:1996.
"This Standard constitutes a revision of EN 692:1996 for which it has been technically revised : the main
modifications are listed below :
Withdrawal of mechanical presses with full revolution clutches,
Tacking into account of some additive requirements about the use of closed tools and fixed' enclosing guard(s)
as protective devices (sub clauses 5.3.4, 5.3.9, 5.3.10 and 5.4.5.3),
Addition of requirements on the implementation of protective devices for powering on the machine,
Redrafting in order to ensure the coherence with the requirements of EN 693.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
4
---------------------- Page: 5 ----------------------
EN 692:2005 (E)
Introduction
This standard has been prepared to be a harmonised standard to provide one means of conforming with the
essential safety requirements of the Machinery Directive and associated EFTA Regulations.
This document is a C-type standard as stated in EN ISO 12100-1.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered are
indicated in the scope of this standard.
When provisions of this C type standard are different from those which are stated in A or B standards, the provision
of this C type standard take precedence over the provisions of the other standards for machines that have been
designed and built according to the provisions of this C type standard.
Complementary guidance is given in the A and B standards to which reference is made in the text (see clause 2).
The figures are intended to be examples only and not to give the only interpretation of the text.
The requirements of this European Standard concern designers, manufacturers, suppliers and importers of
machines described in the scope.
This standard also includes information to be provided by the manufacturer to the user.
1 Scope
1.1 This European Standard specifies technical safety requirements and measures to be adopted by persons
undertaking the design, manufacture and supply of mechanical presses with part revolution clutch hereinafter
called presses which are intended to work cold metal or material partly of cold metal.
NOTE The design of a machine includes the study of the machine itself, taking into account all phases of its “life”,
i.e. construction, transport and commission (including assembly, installation and adjustment), use (including setting,
teaching/programming or process changeover, operation, cleaning, fault finding and maintenance) and de-
commissioning, dismantling and, as far as safety is concerned, disposal, and the drafting of the instructions related
to all above-mentioned phases of the “life” of the machine (except construction), dealt with it in 6.5 of EN ISO
12100-2:2003.
1.2 This European Standard also covers presses, whose primary intended use is to work cold metal, which are
to be used in the same way to work other sheet materials (such as cardboard, plastic, rubber or leather), and metal
powder.
1.3 The requirements in this standard take account of intended use, as defined in 3.22 of EN ISO 12100-1:2003.
This standard presumes access to the press from all directions, deals with the hazards during the various phases
of the life of the machine described in clause 4, and specifies the safety measures for both the operator and other
exposed persons.
1.4 This European Standard also applies to ancillary devices which are an integral part of the press. This
standard also applies to machines which are integrated into an automatic production line where the hazards and
risk arising are comparable to those of machines working separately.
1.5 This European Standard does not cover mechanical presses with full revolution clutch.
1.6 This European Standard does not cover machines whose principal designed purpose is:
a) sheet metal cutting by guillotine;
5
---------------------- Page: 6 ----------------------
EN 692:2005 (E)
b) attaching a fastener, e.g. riveting, stapling or stitching;
c) bending or folding;
d) straightening;
e) turret punch pressing;
f) extruding;
g) drop forging or drop stamping;
h) compaction of metal powder;
i) single purpose punching machines designed exclusively for profiles, e.g. for the construction industry.
1.7 This European Standard is not applicable to machines which are manufactured before the date of publication
of this document by CEN.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 294:1992, Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs.
EN 349:1993, Safety of machinery - Minimum gaps to avoid crushing of parts of the human body.
EN 418:1992, Safety of machinery - Emergency stop equipment, functional aspects - Principles for design.
EN 563:1994, Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish
temperature limit values for hot surfaces.
EN 574:1996, Safety of machinery - Two-hand control devices - Functional aspects - Principles for design.
EN 626-1:1994, Safety of machinery - Reduction of risks to health from hazardous substances emitted by
machinery - Part 1: Principles and specifications for machinery manufacturers.
EN 842:1996, Safety of machinery - Visual danger signals - General requirements, design and testing.
EN 953:1997, Safety of machinery - Guards - General requirements for the design and construction of fixed and
movable guards.
EN 954-1:1996, Safety of machinery - Safety related parts of control systems - Part 1: General principles for
design.
EN 982:1996, Safety of machinery - Safety requirements for fluid power systems and their components -
Hydraulics.
EN 983:1996, Safety of machinery - Safety requirements for fluid power systems and their components -
Pneumatics.
EN 999:1998, Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts
of the human body.
EN 1005-2:2003, Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and
component parts of machinery.
6
---------------------- Page: 7 ----------------------
EN 692:2005 (E)
EN 1037:1995, Safety of machinery - Prevention of unexpected start-up.
EN 1050:1996, Safety of machinery - Principles for risk assessment.
EN 1088:1995, Safety of machinery - Interlocking devices associated with guards -Principles for design and
selection.
EN 1127-1:1997, Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and
methodology.
EN 1299:1997, Mechanical vibration and shock - Vibration isolation of machines - Information for the application or
source isolation.
EN 60204-1:1997, Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC
60204-1:1997).
EN 61310-2:1995, Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
(IEC 1310-2:1995).
EN 61496-1:2004, Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and
tests (IEC 61496-1:2004, modified).
CLC/TS 61496-2:2003, Safety of machinery - Electrosensitive protective equipment - Part 2: Particular
requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:1997).
EN ISO 3746:1995, Acoustics - Determination of sound power levels of noise sources using sound pressure -
Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995).
EN ISO 11202:1995, Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound
pressure levels at work station and at other specified positions - Survey method in situ (ISO 11202:1995).
EN ISO 12100-1:2003, Safety of machinery - Basic concepts, general principles for design - Part 1: Basic
terminology, methodology (ISO 12100-1:2003)
EN ISO 12100-2:2003, Safety of machinery - Basic concepts, general principles for design - Part 2: Technical
principles (ISO 12100-2:2003)
ISO 8540:1993, Open front mechanical power presses - Vocabulary.
3 Terms, definitions and abbreviations
For the purposes of this European Standard, the terms and definitions given in EN ISO 12100-1:2003 and EN ISO
12100-2:2003 and in relevant type A and type B standards, and the following apply.
3.1 Terms and definitions
3.1.1
band brake
brake (see 3.1.2) where a flexible band lined with friction material is arranged around the circumference of a drum
3.1.2
brake
mechanism (usually friction) intended to stop and hold the slide when the clutch, if provided, is disengaged
3.1.3
clutch
mechanism used to impart the movement of the flywheel to the slide
7
---------------------- Page: 8 ----------------------
EN 692:2005 (E)
3.1.4
clutch - full revolution
type of clutch that, when tripped or actuated, cannot be disengaged until the slide has completed a complete
stroke, e.g. most positive key clutches. It also includes clutches which can only be disengaged at certain positions
in the operating cycle
3.1.5
clutch - part revolution
type of clutch that can be engaged or disengaged at any point in the stroke of the slide, e.g. most friction clutches
3.1.6
cycle - automatic
operating mode where the slide repeats continuously or intermittently, all functions achieved without manual
intervention into the danger zone after initiation
3.1.7
cycle - operating
movement of the slide from the cycle start position (normally the top dead centre) to the bottom dead centre and
back to the cycle stop position (normally the top dead centre). The operating cycle includes all operations carried
out during this movement
3.1.8
cycle - single
operating mode where each operating cycle of the slide has to be positively actuated by the operator
3.1.9
dead centres
points at which the tool, during its travel, is
either nearest/closest to the die (generally it corresponds to the end of the closing stroke), known as the
bottom dead centre (BDC),
or furthest from the die (generally it corresponds to the end of the opening stroke), known as the top dead
centre (TDC)
3.1.10
die
fixed part of the tools used in a press
3.1.11
die cushion
accessory for a die which accumulates and releases, or absorbs, force as required in some press operations
3.1.12
direct drive
type of driving arrangement wherein no clutch is used: movement of the slide is accomplished by energising and
de-energising the motor, possibly in conjunction with a brake
3.1.13
early opening interlocking guard
guard associated with an interlocking device which, if opened when any dangerous movement in the tools area has
ceased, does not interrupt the operating cycle
3.1.14
guard locking device
mechanical device to maintain an interlocking guard gate in the closed and locked position until the risk of injury
from the hazardous machine functions has passed
8
---------------------- Page: 9 ----------------------
EN 692:2005 (E)
3.1.15
limited movement control device; inching device
control device, a single actuation of which, together with the control system of the machine, permits only a limited
amount of travel of a machine element
[3.26.9 of EN ISO 12100-1:2003]
3.1.16
mechanical press
machine designed or intended to transmit energy from a prime mover to a tool by mechanical means for the
purpose of the working (e.g. forming or shaping) of cold metal or material partly of cold metal between the tools.
Such energy is transmitted by a flywheel and part revolution clutch or by means of a direct drive mechanism (see
Figure 1)
3.1.17
monitoring (M)
safety function which ensures that a safety measure is initiated if the ability of a component or an element to
perform its function is diminished, or if the process conditions are changed in such a way that hazards are
generated
3.1.18
muting
temporary automatic suspension of a safety function(s) by safety related parts of the control system during
otherwise safe conditions in the operation of a machine
[3.7 of EN 954-1:1996]
3.1.19
overall system stopping performance; overall response time
time occurring from actuating the protective device to the cessation of hazardous motion, or to the machine
assuming a safe condition
3.1.20
overrun
movement of the crankshaft past a defined stopping point, e.g. TDC
3.1.21
overrun monitoring device
device which provides a signal to inhibit further machine initiation when the overrun exceeds the pre-set limit(s)
3.1.22
position switch
switch which is operated by a moving part of the machine when this part reaches or leaves a predetermined
position
3.1.23
redundancy (R)
application of more than one device or system, or part of a device or a system, with the objective of ensuring that,
in the event of one failing to perform its function, another is available to perform that function
[3.47 of EN 60204-1:1997]
3.1.24
shut height
distance from the bed-plate surface to the slide surface measured with the maximum variable stroke, stroke down
and slide adjustment up
[3.12 of ISO 8540:1993]
9
---------------------- Page: 10 ----------------------
EN 692:2005 (E)
3.1.25
single stroke function
feature used to limit the motion of the tool to one operating cycle at each engagement of the clutch even if the
stroke initiating means (e.g. a pedal) is held in the operating position
3.1.26
slide
main reciprocating press member which holds the tool
3.1.27
tool
moving part of the tools
3.1.28
tools
term for the combination of tool and die
3.1.29
tools - closed
tools designed and constructed to be inherently safe (see Figure D.1)
3.2 Abbreviations
M Monitoring (see 3.1.17)
R Redundancy (see 3.1.23)
S Single channel
BDC Bottom dead centre (see 3.1.9)
TDC Top dead centre (see 3.1.9)
PES Programmable electronic system PPS Programmable pneumatic system
AOPD Active opto-electronic protective device
ESPE Electro-sensitive protective equipment
10
---------------------- Page: 11 ----------------------
EN 692:2005 (E)
Key
1 Flywheel guard 6 Slide
2 Clutch/brake 7 Slide flange, tool holder
3 Flywheel 8 Bed-plate/bolster
4 Motor pulley 9 Bed
5 Belt 10 Pedal
Figure 1 — Example of mechanical power press (tools area safeguards not shown)
4 List of significant hazards
4.1 The list of hazards contained in Table 1 is the result of a risk assessment, carried out as required by
EN 1050, for all mechanical presses covered by the scope of this standard. The technical measures and
information for use contained in Clauses 5 and 7 and Annexes A, B, C, E and F are based on the risk assessment,
and deal with the identified hazards by either eliminating them or reducing the effects of the risks they generate.
11
---------------------- Page: 12 ----------------------
EN 692:2005 (E)
4.2 Risk assessment assumes foreseeable access from all directions, as well as overruns, unexpected and
unintended strokes or gravity falls. Risks to both the operators and other persons who can have access to the
danger zones are identified, taking into account all hazards which can occur during the life of the press. The
assessment includes an analysis of the effect of failure in the control system.
4.3 In addition, the user of this standard, i.e. the designer, manufacturer or supplier, shall conduct a risk
assessment in accordance with EN 1050 with particular attention to:
the intended use of the press including maintenance, tool-setting and cleaning, and its reasonably foreseeable
misuse;
the identification of the significant hazards associated with the press (see 4.4).
4.4 Table 1 of this standard is a list of significant hazards and their related danger zones normally associated
with a mechanical power press. As part of the risk assessment, the designer shall verify whether the list of hazards
in Table 1 is exhaustive and applicable to the press under consideration.
12
---------------------- Page: 13 ----------------------
EN 692:2005 (E)
Table 1 — Significant hazards, danger zones, preventive measures
Preventive Relevant
Hazards Danger zone measures: relevant clauses of
clauses of this EN ISO 12100-
standard 1:2003
Mechanical hazards
Crushing hazard Tools area: 5.3 to 5.5 4.2.1
Shearing hazard - between moving tools Annexes A, B, C, D
Cutting or severing hazard - moving slide and E
Entanglement hazard - moving die cushions
Drawing-in or trapping hazard - work-piece ejectors
- guards
Impact hazard Moving parts of electrical, 4.2.1
hydraulic and pneumatic
equipment
Motor and drive machinery 5.6.1 to 5.6.3
Mechanical handling device 5.6.1 to 5.6.4
During installation, setting
operation , maintenance.
Ejection hazard Machine components 5.6.5
Work-pieces and tools 7.2.2 i)
High pressure fluid ejection Hydraulic systems 5.8.3 4.2.1
hazard
Slip, trip and fall hazards All work at heights 5.7 4.10
Floor area around the press
Electrical hazards
Direct contact hazard Electrical equipment 5.8.1 4.3
Indirect contact hazard Electrical equipment 5.8.1 4.3
Parts made live by electrical
equipment under fault conditions
Thermal radiation hazard (burns)
Thermal hazards resulting in Brakes, clutches, parts of the 5.8.2 4.4
burns and scalds, by a possible hydraulic system
contact of persons
Hazards generated by noise Any area at th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.