SIST EN 3475-514:2007
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
This standard specifies an assessment method of the copper porosity on copper clad aluminium strands with or without external coating or on Nickel or silver copper clad aluminium conductors.
It shall be used together with EN 3475-100.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 514: Porosität von Einzeldrähten aus Aluminium mit einer Kupferauflage
Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 514: Porosité d'un revetement cuivre sur des brins aluminium
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 514. del: Poroznost bakrene obloge na aluminijevih žicah
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 514: Porosität von Einzeldrähten aus Aluminium mit einer KupferauflageSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 514: Porosité d'un revetement cuivre sur des brins aluminiumAerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands49.060Aerospace electric equipment and systems49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 3475-514:2007SIST EN 3475-514:2007en01-november-2007SIST EN 3475-514:2007SLOVENSKI
STANDARD
SIST EN 3475-514:2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-514August 2007ICS 49.060 English VersionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 514: Porosity of copper cladding on aluminiumstrandsSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 514: Porositéd'un revêtement cuivre sur des brins aluminiumLuft- und Raumfahrt - Elektrische Leitungen fürLuftfahrtverwendung - Prüfverfahren - Teil 514: Porositätvon Einzeldrähten aus Aluminium mit einer KupferauflageThis European Standard was approved by CEN on 21 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-514:2007: ESIST EN 3475-514:2007
EN 3475-514:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Applicability.4 4 Preparation of specimens.4 5 Method.5 6 Requirements.5
SIST EN 3475-514:2007
EN 3475-514:2007 (E) 3 Foreword This document (EN 3475-514:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.