oSIST prEN IEC 60300-1:2022
(Main)Dependability management - Part 1: Managing dependability
Dependability management - Part 1: Managing dependability
Zuverlässigkeitsmanagement – Teil 1: Management von Zuverlässigkeit
Gestion de la sûreté de fonctionnement - Partie 1: Gestion de la sûreté de fonctionnement
Vodenje zagotovljivosti - 1. del: Upravljanje zagotovljivosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60300-1:2022
01-september-2022
Vodenje zagotovljivosti - 1. del: Upravljanje zagotovljivosti
Dependability management - Part 1: Managing dependability
Gestion de la sûreté de fonctionnement - Partie 1: Gestion de la sûreté de
fonctionnement
Ta slovenski standard je istoveten z: prEN IEC 60300-1:2022
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 Značilnosti in načrtovanje Characteristics and design of
strojev, aparatov, opreme machines, apparatus,
equipment
oSIST prEN IEC 60300-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60300-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60300-1:2022
56/1954/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60300-1 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-10 2022-09-02
SUPERSEDES DOCUMENTS:
56/1931/CD, 56/1948/CC
IEC TC 56 : DEPENDABILITY
SECRETARIAT: SECRETARY:
United Kingdom Ms Stephanie Lavy
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Dependability management - Part 1: Managing dependability
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60300-1:2022
-2- IEC CDV 60300-1 © IEC 2022
1 CONTENTS
2 FOREWORD . 5
3 INTRODUCTION . 7
4 1 Scope . 8
5 2 Normative references . 8
6 3 Terms, definitions and abbreviated terms . 8
7 3.1 Terms and definitions. 8
8 3.2 Abbreviated terms . 13
9 4 Key concepts and application of this document . 13
10 4.1 Overview . 13
11 4.2 Principles of dependability management . 13
12 4.3 Benefits of managing dependability . 14
13 4.4 Attributes of dependability. 14
14 4.5 Relationship between an organization's management system and
15 dependability . 17
16 4.6 Technical programmes for dependability . 18
17 4.7 Life cycle concept . 18
18 4.8 Dependability activity concept . 19
19 5 Integrating dependability into an organization's management system . 19
20 5.1 Overview . 19
21 5.2 Understanding the organization and its context . 20
22 5.3 Leadership . 20
23 5.4 Planning . 21
24 5.5 Support . 21
25 5.6 Information requirements and documentation . 22
26 5.7 Operation . 23
27 5.8 Performance evaluation and improvement . 23
28 6 Programme design . 24
29 6.1 General . 24
30 6.2 Coordination and integration . 24
31 6.3 Trade- offs . 25
32 6.4 Tailoring a technical programme of dependability activities . 25
33 6.5 Key success factors . 26
34 7 Programme management activities . 26
35 7.1 Overview . 26
36 7.2 Planning and coordinating dependability activities . 27
37 7.2.1 Purpose . 27
38 7.2.2 Outcomes . 27
39 7.2.3 Tasks . 27
40 7.3 Implementing the plan . 29
41 7.3.1 Purpose . 29
42 7.3.2 Outcomes . 29
43 7.3.3 Tasks . 29
44 7.4 Review and improvement . 30
45 7.4.1 Purpose . 30
46 7.4.2 Outcomes . 30
47 7.4.3 Tasks . 30
---------------------- Page: 4 ----------------------
oSIST prEN IEC 60300-1:2022
-3- IEC CDV 60300-1 © IEC 2022
48 7.5 Providing assurance . 31
49 7.5.1 Purpose . 31
50 7.5.2 Outcomes . 31
51 7.5.3 Tasks . 31
52 7.6 Achieving accountability . 32
53 7.6.1 Purpose . 32
54 7.6.2 Outcomes . 32
55 7.6.3 Tasks . 32
56 8 Technical dependability activities . 33
57 8.1 Overview . 33
58 8.2 Stakeholder engagement, consensus building and communication . 33
59 8.2.1 Purpose . 33
60 8.2.2 Outcomes . 34
61 8.2.3 Tasks . 34
62 8.3 Managing opportunities, threats and risks . 35
63 8.3.1 Purpose . 35
64 8.3.2 Outcomes . 35
65 8.3.3 Tasks . 35
66 8.4 Dependability analysis . 36
67 8.4.1 Purpose . 36
68 8.4.2 Outcomes . 37
69 8.4.3 Tasks . 37
70 8.5 Dependability assessment . 38
71 8.5.1 Purpose . 38
72 8.5.2 Outcomes . 38
73 8.5.3 Tasks . 39
74 8.6 Maintenance, support and improvement . 39
75 8.6.1 Purpose . 39
76 8.6.2 Outcomes . 40
77 8.6.3 Tasks . 40
78 Annex A (informative) IEC standards related to dependability . 42
79 Annex B (informative) Life cycle models . 45
80 B.1 Generic life cycle . 45
81 B.2 Alternative life cycle models . 46
82 B.2.1 Life cycle model with multiple progressions . 46
83 B.2.2 Manging change through the lifecycle . 46
84 B.2.3 Hardware . 47
85 B.2.4 Software . 47
86 B.2.5 Services . 47
87 B.2.6 Open Systems . 48
88 Annex C (informative) Stakeholders . 49
89 C.1 General . 49
90 C.2 Users of systems, products and services . 49
91 C.3 Managers . 49
92 C.4 The workforce . 49
93 C.5 Specialists . 49
94 C.6 Others . 50
95 C.7 Stakeholders through the life cycle . 50
---------------------- Page: 5 ----------------------
oSIST prEN IEC 60300-1:2022
-4- IEC CDV 60300-1 © IEC 2022
96 C.7.1 Concept – Specification . 50
97 C.7.2 Development . 50
98 C.7.3 Realization (including manufacture, transport acquisition and
99 installation) . 50
100 C.7.4 Operation or use of items . 50
101 C.7.5 Maintenance . 51
102 C.7.6 Obsolescence, retirement and reuse . 51
103 Annex D (informative) Dependability maturity assessment . 52
104 D.1 Maturity models . 52
105 Annex E (informative) Dependability through the lifecycle . 55
106 Annex F (informative) Comparison of approach of ISO/IEC/IEEE 15288 with that of
107 IEC 60300-1 . 58
108 F.1 Overview . 58
109 F.2 Concept of system life cycle processes . 58
110 Annex G (Informative) Testing . 62
111 G.1 General . 62
112 G.2 Purpose and goal of tests . 62
113 G.3 Test conditions . 62
114 G.4 Types of test . 62
115 G.5 Data quality and quantity . 64
116 Bibliography . 65
117
118 Figure 1 – Dependability and security attributes . 16
119 Figure 2 – The relationship between management system standards and the
120 dependability standards . 17
121 Figure 3 – Integration of dependability into a management system . 20
122 Figure B.1 – Generic life cycle model . 45
123 Figure B.2 – Life cycle model with some of the possible progressions . 46
124 Figure B.3 – Managing change through the life cycle . 46
125 Figure B.4 – Example hardware life cycle model . 47
126 Figure B.5 – Example software life cycle model . 47
127 Figure B.6 – Example service life cycle model . 47
128 Figure B.7 – Simplified life cycle model for an open system . 48
129 Figure F.1 – System life cycle processes according to ISO/IEC/IEEE 15288 . 59
130
131 Table A.1 – Classification of dependability standards by topic and life cycle stage . 42
132 Table B.1 – Stages of generic model, their purpose and outputs . 45
133 Table D.1 – Example of dependability maturity matrix . 52
134 Table E.1 – Examples of dependability focus relevant to each life cycle stage . 55
135 Table F.1 – Comparison of approach of ISO/IEC/IEEE 15288:2015 and IEC 60300-1 . 60
136
137
---------------------- Page: 6 ----------------------
oSIST prEN IEC 60300-1:2022
-5- IEC CDV 60300-1 © IEC 2022
138 INTERNATIONAL ELECTROTECHNICAL COMMISSION
139 ____________
140
141 DEPENDABILITY MANAGEMENT
142
143 Part 1: Managing Dependability
144
145 FOREWORD
146 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
147 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
148 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
149 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
150 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
151 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
152 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
153 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
154 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
155 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
156 consensus of opinion on the relevant subjects since each technical committee has representation from all
157 interested IEC National Committees.
158 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
159 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
160 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
161 misinterpretation by any end user.
162 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
163 transparently to the maximum extent possible in their national and regional publications. Any divergence between
164 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
165 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
166 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
167 services carried out by independent certification bodies.
168 6) All users should ensure that they have the latest edition of this publication.
169 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
170 members of its technical committees and IEC National Committees for any personal injury, property damage or
171 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
172 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
173 Publications.
174 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
175 indispensable for the correct application of this publication.
176 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
177 rights. IEC shall not be held responsible for identifying any or all such patent rights.
178 International Standard IEC 60300-1 has been prepared by IEC technical committee TC56.
179 Dependability
180 This fourth edition cancels and replaces the third edition published in 2014 and constitutes a
181 technical revision.
182 This edition includes the following significant technical changes with respect to the previous
183 edition:
184 a) more guidance on integration of dependability activities into an existing management
185 system;
186 b) greater detail on the activities required to establish and implement a progamme of
187 dependability activities
188 c) changes to provide consistency with revision of IEC 60300-3-4, IEC 60300-3-1, IEC 60300-
189 3-10 and IEC 60300-3-14
190 The text of this International Standard is based on the following documents:
---------------------- Page: 7 ----------------------
oSIST prEN IEC 60300-1:2022
-6- IEC CDV 60300-1 © IEC 2022
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
191
192 Full information on the voting for the approval of this International Standard can be found in the
193 report on voting indicated in the above table.
194 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
195 The committee has decided that the contents of this document will remain unchanged until the
196 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
197 the specific document. At this date, the document will be:
198 • reconfirmed,
199 • withdrawn,
200 • replaced by a revised edition, or
201 • amended.
202 The National Committees are requested to note that for this document the stability date is 20XX.
203 This text is included for the information of the national committees and will be deleted at the
204 publication stage.
---------------------- Page: 8 ----------------------
oSIST prEN IEC 60300-1:2022
-7- IEC CDV 60300-1 © IEC 2022
205 INTRODUCTION
206 Dependability is the ability to perform as and when required. A dependable item is one where
207 there is justified confidence that it operates as desired and satisfies agreed stakeholder needs
208 and expectations. Dependability has many attributes but is usually characterised in terms of
209 reliability, maintainability and supportability, and the derived characteristic of availability. In
210 some cases, attributes such as resilience, recoverability, durability, integrity, safety, security,
211 and trustworthiness are included in, or overlap with, dependability.
212 The specification and verification of dependability attributes provides stakeholders with
213 assurance that requirements will be met into the future and quality will be maintained over time.
214 Dependability is an important attribute of a system, product or service which influences the
215 business strategies associated with its design, acquisition and use, and its life time costs. The
216 dependability of an organization's systems, products and services has a strong impact on the
217 perception of the value and trustworthiness of the organization.
218 Dependability is managed as a key element of an organization’s wider management system,
219 particularly aspects relating to assets, quality and finance. There should not be a separate
220 management system for dependability.
221 This document highlights the importance and benefits of managing dependability. It gives
222 guidance on dependability activities and how to integrate them into an existing management
223 system and life cycle processes. It provides information on different life cycle models and how
224 dependability activities can be incorporated into them so that an efficient, effective and
225 economical approach is achieved.
226 Dependability activities bring benefits whenever they are performed but greater benefit is
227 achieved the sooner in the life cycle they are implemented.
228 This document is applicable to a broad range of industry sectors and organizations of any size.
229 It applies to systems of systems, large unique systems, mass produced industrial and consumer
230 products, software applications, components and services. These categories are not mutually
231 exclusive. For example, many products and components are in themselves complex systems.
232 The document will be useful for:
233 • managers and technical personnel;
234 • those involved in deciding how their systems, products and services can be made
235 dependable;
236 • organizations such as regulators who evaluate the dependability of systems, products and
237 services;
238 • those (e.g. users or the public) who need justified confidence in systems, product and
239 services that might affect them;
240 • developers of other dependability related standards.
241 This document is one of a suite of "top level" interrelated IEC dependability standards that
242 provide managers and technical personnel, with guidance on how to effectively plan and
243 implement dependability activities. As such this document should be used in conjunction with:
244 • IEC 60300-3-4 which provides guidance on writing dependability requirements in
245 specifications, and on the means of assuring the achievement of those requirements;
246 • , IEC 60300-3-10 and IEC 60300-3-14 which provide guidance on how to identify and apply
247 appropriate analysis and assurance techniques for maintainability (and maintenance) and
248 supportability (and support) respectively. Standards to cover reliability and availability are
249 planned.
---------------------- Page: 9 ----------------------
oSIST prEN IEC 60300-1:2022
-8- IEC CDV 60300-1 © IEC 2022
250 DEPENDABILITY MANAGEMENT
251
252 Part 1: Managing Dependability
253 1 Scope
254 This document provides guidance on:
255 • the meaning and significance of dependability from a business, technical and financial
256 perspective;
257 • achieving dependability through suitable adaptation of organizational management systems
258 such as those described in the ISO 9000 series (Quality management), ISO 26000
259 (Guidance on social responsibility) and the ISO 55000 series (Asset management);
260 • the activities that need to be integrated into management systems and life cycle processes
261 in order to achieve dependable systems, products and services;
262 • planning and implementing dependability activities throughout the life cycle to achieve and
263 assure required outcomes, taking into account factors such as costs, safety, the
264 environment, customer goodwill, brand and reputation.
265 This document is applicable to any type of system, both new and existing, to mass produced
266 industrial or consumer products, to components and to services. This document addresses all
267 elements of systems, products and services including hardware, software, data, processes,
268 procedures, facilities, materials, and personnel required for operations and support.
269 2 Normative references
270 The following documents are referred to in the text in such a way that some or all of their content
271 constitutes requirements of this document. For dated references, only the edition cited applies.
272 For undated references, the latest edition of the referenced document (including any
273 a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.