SIST EN 60034-15:2009

Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines (IEC 60034-15:2009)

This part of IEC 60034 relates to a.c. machines incorporating form-wound stator coils. It specifies the test procedures and voltages to be applied to the main and interturn insulation of sample coils.

Drehende elektrische Maschinen - Teil 15: Stehstoß-Spannungspegel drehender Wechselstrommaschinen mit Formspulen im Ständer (CEI 60034-15:2009)

Machines electriques tournantes - Partie 15 : Niveaux de tenue au choc électrique des bobines de stator préformées des machines tournantes à courant alternatif (IEC 60034-15:2009)

La CEI 60034-15:2009 s'applique aux machines à courant alternatif comprenant des bobines de stator préformées et spécifie les procédures d'essai et les tensions à appliquer à l'isolation principale et à l'isolation entre spires de bobines échantillons. Les modifications de cette nouvelle édition par rapport à l'ancienne sont les suivantes:  - clarification du titre,  - retrait des limitations en tension,  - définitions complémentaires,  - recommandations supplémentaires.

Električni rotacijski stroji - 15. del: Nivoji vzdržljivosti na impulzno napetost oblikovno navitih statorskih tuljav pri rotacijskih izmeničnih strojih (IEC 60034-15:2009)

General Information

• Status: Published
• Publication Date: 16-Aug-2009
• ICS: 29.160.01 - Rotating machinery in general
• Technical Committee: ERS - Rotating machinery
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Jul-2009
• Due Date: 11-Sep-2009
• Completion Date: 17-Aug-2009
• Ref Project: EN 60034-15:2009 - Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

Relations

• Replaces: SIST EN 60034-15:1999 - Rotating electrical machines -- Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
• Effective Date: 01-Sep-2009
• Replaces: SIST EN 60034-15:1999 - Rotating electrical machines -- Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
• Effective Date: 28-Jan-2023
• Revised: SIST EN 60034-15:1999 - Rotating electrical machines -- Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
• Effective Date: 08-May-2012
• Replaces: SIST EN 60034-15:1999 - Rotating electrical machines -- Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60034-15:2009
01-september-2009
1DGRPHãþD
SIST EN 60034-15:1999
(OHNWULþQLURWDFLMVNLVWURMLGHO1LYRMLY]GUåOMLYRVWLQDLPSXO]QRQDSHWRVW
REOLNRYQRQDYLWLKVWDWRUVNLKWXOMDYSULURWDFLMVNLKL]PHQLþQLKVWURMLK,(&

Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound
stator coils for rotating a.c. machines (IEC 60034-15:2009)
Drehende elektrische Maschinen - Teil 15: Stehstoß-Spannungspegel drehender
Wechselstrommaschinen mit Formspulen im Ständer (CEI 60034-15:2009)
Machines electriques tournantes - Partie 15 : Niveaux de tenue au choc électrique des
bobines de stator préformées des machines tournantes à courant alternatif (IEC 60034-
15:2009)
Ta slovenski standard je istoveten z: EN 60034-15:2009
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-15:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60034-15:2009

---------------------- Page: 2 ----------------------

SIST EN 60034-15:2009

EUROPEAN STANDARD
EN 60034-15

NORME EUROPÉENNE
June 2009
EUROPÄISCHE NORM

ICS 29.160 Supersedes EN 60034-15:1996


English version


Rotating electrical machines -
Part 15: Impulse voltage withstand levels
of form-wound stator coils for rotating a.c. machines
(IEC 60034-15:2009)


Machines électriques tournantes -  Drehende elektrische Maschinen -
Partie 15: Niveaux de tenue Teil 15: Steh-Stoßspannungspegel
au choc électrique des bobines von Formspulen im Ständer drehender
de stator préformées des machines Wechselstrommaschinen
tournantes à courant alternatif (IEC 60034-15:2009)
(CEI 60034-15:2009)




This European Standard was approved by CENELEC on 2009-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-15:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60034-15:2009
EN 60034-15:2009 - 2 -
Foreword
The text of document 2/1534/FDIS, future edition 3 of IEC 60034-15, prepared by IEC TC 2, Rotating
machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60034-15 on 2009-05-01.
This European Standard supersedes EN 60034-15:1996.
The principal technical changes are as follows:
– change of title to clarify that it is form-wound coils that are being tested rather than machines;
– removal of the limitation on voltage in the scope;
– additional definitions for consistency with EN 60060-1;
– reduction in tolerances for the risetime of the steep-fronted impulse voltage;
– guidance on test levels for coils to be used in converter driven machines;
– guidance on voltage levels for routine tests;
– additional figures to show testing details and oscillograms of normal and faulty coils.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-05-01
with the EN have to be withdrawn
__________
Endorsement notice
The text of the International Standard IEC 60034-15:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60034-1 NOTE  Harmonized as EN 60034-1:2004 (not modified).
1)
IEC 60060-1 NOTE  Harmonized as EN 60060-1:200X (not modified).
IEC 60071-1 NOTE  Harmonized as EN 60071-1:2006 (not modified).
__________



1)
At draft stage.

---------------------- Page: 4 ----------------------

SIST EN 60034-15:2009
IEC 60034-15
®
Edition 3.0 2009-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Rotating electrical machines –
Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating
a.c. machines

Machines électriques tournantes –
Partie 15: Niveaux de tenue au choc électrique des bobines de stator préformées
des machines tournantes à courant alternatif

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 29.160 ISBN 2-8318-1033-0
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 60034-15:2009
– 2 – 60034-15 © IEC:2009
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Terms and definitions .6
3 Impulse voltage withstand levels .6
4 Sample tests .7
4.1 General .7
4.2 Impulse voltage withstand test of the interturn insulation .7
4.3 Lightning impulse voltage withstand test of the main insulation .8
4.4 Power-frequency voltage withstand test .8
5 Routine tests .8
5.1 Coils.8
5.2 Complete stators .8
Annex A (informative) Principles involved in the specification of impulse voltage
withstand levels and test procedures .9
Annex B (informative) Testing details.10
Bibliography.12

Figure B.1 – Example of the test circuit for sample tests .10
Figure B.2 – Example of the test circuit for routine tests .11
Figure B.3 – Examples of the waveforms from undamaged and short-circuited coils
tested directly connected in the stator core .11

Table 1 – Impulse voltage withstand levels for sample form-wound coils used in a.c.
rotating machines .7

---------------------- Page: 6 ----------------------

SIST EN 60034-15:2009
60034-15 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ROTATING ELECTRICAL MACHINES –

Part 15: Impulse voltage withstand levels
of form-wound stator coils for rotating a.c. machines


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60034-15 has been prepared by IEC technical committee 2:
Rotating machinery.
This third edition cancels and replaces the second edition published in 1995 and constitutes a
technical revision. The principal technical changes are as follows.
• Change of title to clarify that it is form-wound coils that are being tested rather than
machines.
• Removal of the limitation on voltage in the Scope.
• Additional definitions for consistency with IEC 60060-1.
• Reduction in tolerances for the risetime of the steep-fronted impulse voltage.
• Guidance on test levels for coils to be used in converter driven machines.
• Guidance on voltage levels for routine tests.
• Additional figures to show testing details and oscillograms of normal and faulty coils.

---------------------- Page: 7 ----------------------

SIST EN 60034-15:2009
– 4 – 60034-15 © IEC:2009
The text of this standard is based on the following documents:
FDIS Report on voting
2/1534/FDIS 2/1547/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
NOTE A table of cross-references of all IEC TC 2 publications can be found on the IEC TC 2 dashboard on the
IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

SIST EN 60034-15:2009
60034-15 © IEC:2009 – 5 –
INTRODUCTION
IEC 60071-1 specifies general requirements for the phase to earth insulation of equipment
in three phase a.c. systems and states that each apparatus committee is responsible
for specifying the insulation levels and test procedures for its equipment, taking into
consideration the recommendations of IEC 60071-1. The object of IEC 60034-15 is to specify
requirements for rotati
...