SIST EN ISO 19152-5:2025

Geographic information - Land Administration Domain Model (LADM) - Part 5: Spatial plan information (ISO 19152-5:2025)

This document:
—     specifies a reference land administration domain model (LADM) covering basic information-related components of spatial plan information on land/water and elements below/on/above the surface of the Earth with 2D/3D/4D (3D + time) geometric representation;
—     provides an abstract, conceptual model with packages related to:
—    plan unit, i.e. the smallest homogenous area/space (2D/3D/4D) with assigned function/purpose, e.g. office, education, retail;
—    plan block, i.e. a set of neighbouring plan units decided on by planning authorities, e.g. high-density residential area, nature area, heavy industry area;
—    plan group unit, i.e. areas corresponding to the higher planning levels;
—    plan group, i.e. hierarchy in spatial plans consisting of multiple plan blocks, e.g.:
—     continent/regional-wide (e.g. European regions),
—     country-wide (e.g. Indonesia, the Netherlands),
—     island,
—     state or region province,
—     municipality or city, and
—     urban or rural;
—    permit, i.e. something that is granted to a party which gives the party permission to undertake an activity which would otherwise be restricted;
—     defines terminology for spatial plan information as part of land administration, based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions;
—     provides a platform for comparison and monitoring of spatial planning information based on Sustainable Development Goal (SDG) indicators;
—     provides an approach to modelling the integration of spatial plan information (outputs of spatial plans) into land administration;
—     provides a basis for national and regional profiles;
—     enables the combining of land-use planning and land development planning in land administration information from different sources in a coherent manner;
—     allows for the relationship to multiple parties and groups to be expressed together with a referencing structure so that the sourcing of all information systems can be maintained. It reuses core LADM classes so that sourcing of all information systems can be maintained;
—     establishes the common elements and basic schema for spatial plan information upon which a more detailed schema can be established.
NOTE            This document does not interfere with (national) and sub-national spatial planning laws.

Geoinformationen - Land Administration Domain Model (LADM) - Teil 5: Raumbezogene Planinformationen (ISO 19152-5:2025)

Information géographique - Modèle du domaine de l’administration des terres (LADM) - Partie 5: Informations sur le plan d’aménagement du territoire (ISO 19152-5:2025)

Le présent document:
—     spécifie un modèle de référence du domaine de l'administration des terres (LADM) qui couvre les composants relatifs aux informations de base sur le plan d'aménagement du territoire concernant la terre et l'eau, et les éléments situés au-dessous de surfaces, dessus ou au-dessus de la surface de la Terre avec une représentation géométrique en 2D/3D/4D (3D + temps);
—     fournit un modèle conceptuel abstrait composé de paquetages relatifs:
—    à l'unité de plan, c'est-à-dire la zone/l'espace (2D/3D/4D) homogène le plus petit ayant une fonction/un objectif assigné, par exemple bureaux, éducation, ou vente au détail;
—    au bloc de plan, c'est-à-dire un ensemble d'unités de plan voisines décidé par les autorités de planification, par exemple zone résidentielle à forte densité, zone naturelle, zone d'industrie lourde;
—    à l'unité de groupe de plan, c'est-à-dire les zones correspondant aux niveaux de planification supérieurs;
—    au groupe de plan, c'est-à-dire la hiérarchie dans les plans d’aménagement du territoire comprenant plusieurs blocs de plan, par exemple:
—     au niveau d'un continent/régional (par exemple, régions d'Europe);
—     au niveau d'un pays (par exemple, Indonésie, Pays-Bas);
—     une île;
—     un État ou une province;
—     une municipalité ou une ville; et
—     urbain ou rural;
—    au permis, c'est-à-dire quelque chose qui est accordé à une partie et qui lui donne la permission d'entreprendre une activité qui serait autrement restreinte;
—     définit une terminologie pour les informations sur le plan d'aménagement du territoire dans le cadre de l'administration des terres, fondée sur divers systèmes nationaux et internationaux, aussi simple que possible afin d'être utile dans la pratique. La terminologie permet d'obtenir une description commune de différentes pratiques et procédures, officielles ou non, dans diverses juridictions;
—     fournit une plate-forme permettant des comparaisons et un suivi des informations d'aménagement du territoire reposant sur les indicateurs des objectifs de développement durable (ODD);
—     fournit une approche pour modéliser l'intégration des informations sur le plan d'aménagement du territoire (résultats des plans d'aménagement du territoire) dans l'administration des terres;
—     propose une base pour les profils nationaux et régionaux;
—     permet de combiner de manière cohérente la planification de l'utilisation des terres et de l'aménagement du territoire dans des informations d'administration des terres provenant de différentes sources;
—     permet l'expression des relations avec de multiples parties et groupes, ainsi qu'une structure de référencement permettant d'assurer la mise à jour des sources de l'ensemble des systèmes d'information. Il réutilise les classes du LADM principal, permettant d'assurer la mise à jour des sources de l'ensemble des systèmes d'information;
—     établit les éléments communs et un schéma de base pour les informations sur le plan d'aménagement du territoire, pouvant servir de socle à un schéma plus détaillé.
NOTE            Le présent document n'interfère pas avec les lois (nationales) et infranationales en matière d'aménagement du territoire.

Geografske informacije - Model domene za zemljiško administracijo (LADM) - 5.del: Informacije o prostorskem načrtu (ISO 19152-5:2025)

General Information

• Status: Published
• Public Enquiry End Date: 08-Sep-2024
• Publication Date: 30-Sep-2025
• ICS: 07.040 - Astronomy. Geodesy. Geography
• ICS: 35.240.70 - IT applications in science
• Technical Committee: GIG - Geographic information
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 27-Aug-2025
• Due Date: 01-Nov-2025
• Completion Date: 01-Oct-2025
• Ref Project: EN ISO 19152-5:2025 - Geographic information - Land Administration Domain Model (LADM) - Part 5: Spatial plan information (ISO 19152-5:2025)

Relations

• Replaces: SIST EN ISO 19152:2013 - Geographic information - Land Administration Domain Model (LADM) (ISO 19152:2012)
• Effective Date: 01-Nov-2025

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2025
Nadomešča:
SIST EN ISO 19152:2013
Geografske informacije - Model domene za zemljiško administracijo (LADM) -
5.del: Informacije o prostorskem načrtu (ISO 19152-5:2025)
Geographic information - Land Administration Domain Model (LADM) - Part 5: Spatial
plan information (ISO 19152-5:2025)
Geoinformationen - Land Administration Domain Model (LADM) - Teil 5: Raumbezogene
Planinformationen (ISO 19152-5:2025)
Information géographique - Modèle du domaine de l’administration des terres (LADM) -
Partie 5: Informations sur le plan d’aménagement du territoire (ISO 19152-5:2025)
Ta slovenski standard je istoveten z: EN ISO 19152-5:2025
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19152-5
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2025
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19152:2012
English Version
Geographic information - Land Administration Domain
Model (LADM) - Part 5: Spatial plan information (ISO
19152-5:2025)
Information géographique - Modèle du domaine de Geoinformationen - Land Administration Domain
l'administration des terres (LADM) - Partie 5: Model (LADM) - Teil 5: Informationen zur
Informations sur le plan d'aménagement du territoire Raumplanung (ISO 19152-5:2025)
(ISO 19152-5:2025)
This European Standard was approved by CEN on 30 June 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19152-5:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 19152-5:2025) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2026, and conflicting national standards
shall be withdrawn at the latest by February 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19152:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19152-5:2025 has been approved by CEN as EN ISO 19152-5:2025 without any
modification.
International
Standard
ISO 19152-5
First edition
Geographic information — Land
2025-08
Administration Domain Model
(LADM) —
Part 5:
Spatial plan information
Information géographique — Modèle du domaine de
l’administration des terres (LADM) —
Partie 5: Informations sur le plan d’aménagement du territoire
Reference number
ISO 19152-5:2025(en) © ISO 2025

ISO 19152-5:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 19152-5:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms, definitions, and abbreviations . 2
3.1 Terms and definitions .2
3.2 Abbreviations .4
4 Conformance . 4
4.1 Conformance requirements and testing .4
4.2 Conformance class.4
4.2.1 General .4
4.2.2 Dependencies .5
5 Notation . 5
6 LADM spatial plan information package . 5
6.1 General requirements of the conceptual LADM spatial plan information .5
6.2 VersionedObject and spatial plan information package .7
6.3 Spatial plan information classes .8
6.3.1 General .8
6.3.2 Overview .8
6.3.3 SP_PlanUnit .9
6.3.4 SP_PlanBlock .10
6.3.5 SP_PlanGroup . 13
6.3.6 SP_Permit . 13
6.3.7 SP_PlanGroupUnit .14
7 Relationship with LADM objects . 14
7.1 Spatial plan information and LADM geometry .14
7.2 Spatial plan information and basic classes of LADM . 15
Annex A (normative) Abstract test suite . 17
Annex B (informative) The spatial planning interoperability. 19
Annex C (informative) Country profiles .20
Annex D (informative) Code lists .24
Annex E (informative) LADM Spatial plan information and INSPIRE .31
Annex F (informative) Examples of 3D spatial information planning and regulation.33
Bibliography .34

iii
ISO 19152-5:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which
...