SIST EN ISO 7686:2005

Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)

ISO 7686:2005 specifies a method for the determination of the opacity of plastics pipes and fittings.

Rohre und Formstücke aus Kunststoffen - Bestimmung der Opazität (ISO 7686:2005)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Opazität von Rohren und Formstücken aus Kunststoffen fest.
ANMERKUNG   Ein Rohr oder ein Formstück, das für die Wasserversorgung verwendet wird und beim Gebrauch dem sichtbaren Licht ausgesetzt wird, muss ausreichend lichtundurchlässig sein, um Algenwachstum zu verhindern.

Tubes et raccords en matieres plastiques - Détermination de l'opacité (ISO 7686:2005)

L'ISO 7686:2005 spécifie une méthode pour la détermination de l'opacité des tubes et des raccords en matières plastiques.

Polimerne cevi in fitingi – Ugotavljanje svetlobne prepustnosti (ISO 7686:2005)

General Information

• Status: Published
• Publication Date: 31-Aug-2005
• ICS: 23.040.20 - Plastics pipes
• ICS: 23.040.45 - Plastics fittings
• Technical Committee: PCV - Plastic pipes, fittings and valves
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2005
• Due Date: 01-Sep-2005
• Completion Date: 01-Sep-2005
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Mandate: M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
• Ref Project: EN ISO 7686:2005 - Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)

Relations

• Replaces: SIST EN 578:1997 - Plastics piping systems - Plastics pipes and fittings - Determination of the opacity
• Effective Date: 01-Sep-2005
• Replaces: SIST ISO 7686:1995 - Plastics pipes and fittings -- Opacity -- Test method
• Effective Date: 01-Feb-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7686:2005
01-september-2005
1DGRPHãþD
SIST EN 578:1997
Polimerne cevi in fitingi – Ugotavljanje svetlobne prepustnosti (ISO 7686:2005)
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)
Rohre und Formstücke aus Kunststoffen - Bestimmung der Opazität (ISO 7686:2005)
Tubes et raccords en matieres plastiques - Détermination de l'opacité (ISO 7686:2005)
Ta slovenski standard je istoveten z: EN ISO 7686:2005
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
SIST EN ISO 7686:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7686:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 7686:2005
EUROPEAN STANDARD
EN ISO 7686
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 23.040.20; 23.040.45 Supersedes EN 578:1993
English Version
Plastics pipes and fittings - Determination of opacity (ISO
7686:2005)
Tubes et raccords en matières plastiques - Détermination Rohre und Formstücke aus Kunststoffen - Bestimmung der
de l'opacité (ISO 7686:2005) Opazität (ISO 7686:2005)
This European Standard was approved by CEN on 20 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7686:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7686:2005

EN ISO 7686:2005 (E)





Foreword


This document (EN ISO 7686:2005) has been prepared by Technical Committee ISO/TC 138
"Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 "Plastics piping systems and ducting systems", the secretariat of which
is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2006, and conflicting national
standards shall be withdrawn at the latest by January 2006.

This document supersedes EN 578:1993.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 7686:2005 has been approved by CEN as EN ISO 7686:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7686:2005

INTERNATIONAL ISO
STANDARD 7686
Second edition
2005-07-01


Plastics pipes and fittings —
Determination of opacity
Tubes et raccords en matières plastiques — Détermination de l'opacité





Reference number
ISO 7686:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 7686:2005
ISO 7686:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 7686:2005
ISO 7686:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7686 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the
transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and
their accessories — Test methods and basic specifications.
This second edition cancels and replaces the first edition (ISO 7686:1992), of which it constitutes a technical
revision. It incorporates the following modifications:
 a note giving the principal reason for measurement of opacity of products has been added to the scope;
 the use of an integrati
...