SIST EN 60974-13:2011
(Main)Arc welding equipment - Part 13: Welding clamp
Arc welding equipment - Part 13: Welding clamp
This part of IEC 60974 is applicable to clamps for arc welding processes, designed to make an electrical connection to the workpiece without using tools. This part of IEC 60974 is not applicable to clamps for underwater welding and plasma cutting. This part of IEC 60974 specifies safety and performance requirements of welding clamps. This part of IEC 60974 does not specify requirements for welding cables.
Lichtbogenschweißeinrichtungen - Teil 13: Schweißstromrückleitungsklemmen
Matériel de soudage à l'arc - Partie 13: Pinces de retour de courant
La CEI 60974-13:2011 est applicable aux pinces de retour de courant pour les procédés de soudage à l'arc, conçues pour les relier électriquement à la pièce mise en uvre sans l'aide d'outils. La présente partie de la CEI 60974 n'est pas applicable aux pinces de retour de courant pour le soudage sous-marin et le coupage plasma. La présente partie de la CEI 60974 spécifie les exigences de sécurité et de performance des pinces de retour de courant. La présente partie de la CEI 60974 ne spécifie pas les exigences pour les câbles de soudage.
Naprave za obločno varjenje - 13. del: Povratna tokovna sponka
Ta del IEC 60974 velja za sponke za postopke obločnega varjenja, namenjene za električno priključitev na obdelovanec brez uporabe orodja. Ta del IEC 60974 ne velja za sponke za podvodno varjenje in plazemsko rezanje. Ta del IEC 60974 določa zahteve za varnost in delovanje povratnih tokovnih sponk. Ta del IEC 60974 ne določa zahtev za kable za varjenje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60974-13:2011
01-oktober-2011
1DSUDYH]DREORþQRYDUMHQMHGHO 3RYUDWQDWRNRYQDVSRQND
Arc welding equipment - Part 13: Welding clamp
Matériel de soudage à l'arc - Partie 13: Pinces de retour de courant
Ta slovenski standard je istoveten z: EN 60974-13:2011
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN 60974-13:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60974-13:2011
---------------------- Page: 2 ----------------------
SIST EN 60974-13:2011
EUROPEAN STANDARD
EN 60974-13
NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM
ICS 25.160.30
English version
Arc welding equipment -
Part 13: Welding clamp
(IEC 60974-13:2011)
Matériel de soudage à l'arc - Lichtbogenschweißeinrichtungen -
Partie 13: Pince de retour de courant Teil 13:
(CEI 60974-13:2011) Schweißstromrückleitungsklemmen
(IEC 60974-13:2011)
This European Standard was approved by CENELEC on 2011-06-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-13:2011 E
---------------------- Page: 3 ----------------------
SIST EN 60974-13:2011
EN 60974-13:2011 - 2 -
Foreword
The text of document (26/442/FDIS), future edition 1 of IEC 60974-13, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60974-13 on 2011-06-22.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-03-22
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-06-22
with the EN have to be withdrawn
In this standard, the following print types are used:
- conformity statements: in italic type.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60974-13:2011 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 60974-13:2011
- 3 - EN 60974-13:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-151 - International Electrotechnical Vocabulary - -
(IEV) -
Part 151: Electrical and magnetic devices
IEC 60974-1 - Arc welding equipment - EN 60974-1 -
Part 1: Welding power sources
---------------------- Page: 5 ----------------------
SIST EN 60974-13:2011
---------------------- Page: 6 ----------------------
SIST EN 60974-13:2011
IEC 60974-13
®
Edition 1.0 2011-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Arc welding equipment –
Part 13: Welding clamp
Matériel de soudage à l’arc –
Partie 13: Pince de retour de courant
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 25.160.30 ISBN 978-2-88912-501-2
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 60974-13:2011
– 2 – 60974-13 IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Environmental conditions . 5
5 Type tests . 6
5.1 Test conditions . 6
5.2 Measuring instruments . 6
5.3 Test sequence . 6
6 Designation . 6
7 Protection against electric shock . 7
7.1 Voltage drop . 7
7.2 Protection of live parts. 7
8 Thermal rating . 7
8.1 Temperature rise . 7
8.2 Resistance to hot objects . 8
9 Mechanical requirements . 8
9.1 Retaining means . 8
9.2 Welding cable entry . 9
9.3 Welding cable connection . 9
9.4 Drop withstand . 9
10 Marking . 9
11 Instructions for use . 10
Bibliography . 11
Figure 1 – Device for testing the resistance to hot objects . 8
Table 1 – Relation between welding clamp test current and welding cables cross-
sectional area . 7
---------------------- Page: 8 ----------------------
SIST EN 60974-13:2011
60974-13 IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ARC WELDING EQUIPMENT –
Part 13: Welding clamp
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60974-13 has been prepared by IEC technical committee 26:
Electric welding
The text of this standard is based on the following documents:
FDIS Report on voting
26/442/FDIS 26/447/RVD
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.