SIST EN 10324:2004
(Main)Steel wire and wire products - Hose reinforcement wire
Steel wire and wire products - Hose reinforcement wire
This document specifies the composition, dimensions and mechanical properties of high carbon steel wire for reinforcing high pressure hoses. It is applicable to wire used as a multiple parallel wire braided or spirally wrapped reinforcement in a rubber or synthetic hose which is made to withstand relatively high bursting pressure.
Stahldraht und Drahterzeugnisse - Schlaucharmierungsdraht
Dieses Dokument legt die Zusammensetzung, die Maße und die mechanischen Eigenschaften fest von Stahldraht mit hohem Kohlenstoffgehalt zur Armierung von Hochdruckschläuchen. Es gilt für Draht, der als mehrfach parallel gewickelte oder spiralförmig gewickelte Bewehrung in einem Gummi- oder Synthetikschlauch verwendet wird, der relativ hohem Berstdruck widerstehen muss.
Fils et produits tréfilés en acier - Fil d'armature pour flexibles
La présente Norme européenne spécifie la composition, les dimensions, les propriétés mécaniques du fil en acier dur au carbone destiné au renforcement de flexibles haute pression. Elle est applicable aux fils de renforcement multiples paralleles tressés ou enroulés en spirale dans un flexible en caoutchouc ou en matiere synthétique conçu pour résister a une pression d'éclatement relativement élevée.
Jeklena žica in žični izdelki – Žica za armiranje cevi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - SchlaucharmierungsdrahtFils et produits tréfilés en acier - Fil d'armature pour flexiblesSteel wire and wire products - Hose reinforcement wire77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10324:2004SIST EN 10324:2004en01-november-2004SIST EN 10324:2004SLOVENSKI
STANDARD
SIST EN 10324:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10324September 2004ICSEnglish versionSteel wire and wire products - Hose reinforcement wireFils et produits tréfilés en acier - Fil d'armature pourflexiblesStahldraht und Drahterzeugnisse -SchlaucharmierungsdrahtThis European Standard was approved by CEN on 1 July 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10324:2004: ESIST EN 10324:2004
EN 10324:2004 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Classification.5 5 Designation and ordering.5 5.1 Designation.5 5.2 Information to be supplied by the purchaser and items to be agreed.5 6 Requirements.6 6.1 Material.6 6.1.1 Steel.6 6.1.2 Chemical composition.6 6.1.3 Wire.6 6.1.4 Coating material.6 6.2 Mechanical properties.7 6.2.1 Tensile strength and elongation.7 6.2.2 Reverse bend test.7 6.2.3 Torsion test.7 6.3 Surface quality.9 6.3.1 General.9 6.3.2 Coating mass.9 6.4 Dimensions and tolerances.9 6.4.1 Tolerance on diameter.9 6.4.2 Out of roundness.9 6.5 Delivery conditions.9 6.5.1 Unit package.9 6.5.2 Welds.9 6.5.3 Cast of wire.10 7 Testing and inspection.10 7.1 Tests and inspection documents.10 7.2 Test procedures.10 7.2.1 Tensile test.10 7.2.2 Reverse bend test and torsion test.10 7.2.3 Diameter and out of roundness.10 7.3 Coating mass.10 7.4 Retests.10 8 Marking, labelling and packaging.10 Annex A (informative)
Packaging of hose reinforcement wire.12 A.1 Recommended types of spool.12 A.2 Recommended length of wire per spool.13
SIST EN 10324:2004
EN 10324:2004 (E) 3 Foreword This document (EN 10324:2004) has been prepared by Technical Committee ECISS/TC 30 “Steel wire”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 10324:2004
EN 10324:2004 (E) 4 1 Scope This document specifies the composition, dimensions and mechanical properties of high carbon steel wire for reinforcing high pressure hoses. It is applicable to wire used as a multiple parallel wire braided or spirally wrapped reinforcement in a rubber or synthetic hose which is made to withstand relatively high bursting pressure. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10002-1, Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature EN 10016-1, Non-alloy steel rod for drawing and/or cold rolling — Part 1: General requirements EN 10016-2, Non-alloy steel rod for drawing and/or cold rolling — Part 2: Specific requirements for general purposes rod EN 10016-4, Non-alloy steel rod for drawing and/or cold rolling — Part 4: Specific requirements for rod for special applications EN 10021, General technical delivery requirements for steel and iron products EN 10204, Metallic products — Types of inspection documents EN 10218-1:1994, Steel wire and wire products — General — Part 1: Test methods
EN 10218-2, Steel wire and wire products — General — Part 2: Wire dimensions and tolerances EN 10244-1, Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 1: General principles EN 10244-6, Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 6: Copper, bronze or brass coatings CR 10261, ECISS Information Circular 11 – Iron a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.