oSIST prEN ISO 15614-4:2021

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021)

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 4: Fertigungsschweißen von Aluminiumguss (ISO/DIS 15614-4:2021)

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 4: Réparation par soudage pour les travaux de finition des pièces moulées en aluminium (ISO/DIS 15614-4:2021)

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 4. del: Varjenje aluminijevih ulitkov (ISO/DIS 15614-4:2021)

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Nov-2021
• ICS: 25.160.10 - Welding processes
• ICS: 77.120.10 - Aluminium and aluminium alloys
• Technical Committee: VAR - Welding
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 16-Jan-2024
• Due Date: 21-Jan-2024
• Completion Date: 16-Jan-2024
• Ref Project: prEN ISO 15614-4 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021)

Relations

• Revised: SIST EN ISO 15614-4:2005 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)
• Effective Date: 01-Oct-2021
• Revised: SIST EN ISO 15614-4:2005/AC:2008 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005/Cor 1:2007)
• Effective Date: 01-Oct-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 15614-4:2021
01-oktober-2021
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 4. del: Varjenje aluminijevih ulitkov (ISO/DIS 15614-4:2021)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 4: Fertigungsschweißen von Aluminiumguss (ISO/DIS
15614-4:2021)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 4:
Réparation par soudage pour les travaux de finition des pièces moulées en aluminium
(ISO/DIS 15614-4:2021)
Ta slovenski standard je istoveten z: prEN ISO 15614-4
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
oSIST prEN ISO 15614-4:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15614-4:2021

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15614-4:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-4
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-09-07 2021-11-30
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 4:
Finishing welding of aluminium castings
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire de soudage —
Partie 4: Réparation par soudage pour les travaux de finition des pièces moulées en aluminium
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15614-4:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15614-4:2021
ISO/DIS 15614-4:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15614-4:2021
ISO/DIS 15614-4:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .2
4 Preliminary welding procedure specification (pWPS) .2
5 Welding procedure test . 3
6 Test pieces .
...