iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST-TS FprCEN ISO/TS 19392-6:2024

(Main)

Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)

Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)

This document describes a method to measure ice adhesion from artificial ice on test substrates by using a centrifuge. Basic ice types are defined and test parameters for the ice removal are described to achieve reproducibility of test results for ice adhesion measurements for rotor blade coatings. This document does not intend to provide fixed test parameter to account for the diversity of relevant icing scenarios in this field of application.

Beschichtungsstoffe - Beschichtungssysteme für Rotorblätter von Windenergieanlagen - Teil 6: Bestimmung und Bewertung der Eisadhäsion mittels Zentrifuge (ISO/TS 19392-6:2023)

Peintures et vernis - Matériaux de revêtement pour pales de turbines éoliennes - Partie 6: Détermination et évaluation de l'adhésion de la glace à l'aide d'une centrifugeuse (ISO/TS 19392-6:2023)

Barve in laki - Premazni sistemi za lopatice rotorjev vetrnih turbin - 6. del: Ugotavljanje in vrednotenje oprijema ledu z uporabo centrifuge (ISO/TS 19392-6:2023)

General Information

Status
Not Published
Public Enquiry End Date
02-May-2024
ICS
87.040 - Paints and varnishes
Technical Committee
IBLP - Paints and varnishes
Current Stage
5520 - Unique Acceptance Procedure (UAP) (Adopted Project)
Start Date
04-Mar-2024
Due Date
22-Jul-2024
Completion Date
14-May-2024
Ref Project
FprCEN ISO/TS 19392-6 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)

Buy Standard

kTS FprCEN ISO/TS 19392-6:2024kTS FprCEN ISO/TS 19392-6:2024
PreviousNext
Draft
kTS FprCEN ISO/TS 19392-6:2024
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TS FprCEN ISO/TS 19392-6:2024
01-april-2024
Barve in laki - Premazni sistemi za lopatice rotorjev vetrnih turbin - 6. del:
Ugotavljanje in vrednotenje oprijema ledu z uporabo centrifuge (ISO/TS 19392-
6:2023)
Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6:
Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)
Beschichtungsstoffe - Beschichtungssysteme für Rotorblätter von Windenergieanlagen -
Teil 6: Bestimmung und Bewertung der Eisadhäsion mittels Zentrifuge (ISO/TS 19392-
6:2023)
Peintures et vernis - Matériaux de revêtement pour pales de turbines éoliennes - Partie
6: Détermination et évaluation de l'adhésion de la glace à l'aide d'une centrifugeuse
(ISO/TS 19392-6:2023)
Ta slovenski standard je istoveten z: FprCEN ISO/TS 19392-6
ICS:
87.040 Barve in laki Paints and varnishes
kSIST-TS FprCEN ISO/TS 19392-6:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN ISO/TS 19392-6:2024

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN ISO/TS 19392-6:2024
TECHNICAL ISO/TS
SPECIFICATION 19392-6
First edition
2023-02
Paints and varnishes — Coating
systems for wind-turbine rotor
blades —
Part 6:
Determination and evaluation of ice
adhesion using centrifuge
Peintures et vernis — Matériaux de revêtement pour pales de turbines
éoliennes —
Partie 6: Détermination et évaluation de l'adhésion de la glace à
l'aide d'une centrifugeuse
Reference number
ISO/TS 19392-6:2023(E)
© ISO 2023

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN ISO/TS 19392-6:2024
ISO/TS 19392-6:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 4 ----------------------
kSIST-TS FprCEN ISO/TS 19392-6:2024
ISO/TS 19392-6:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 2
7 Test panels .3
7.1 Substrate . 3
7.2 Preparation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 20567-4:2024(Main)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023)
EN ISO 20567-4:2024

This document specifies a mobile method for evaluating the resistance of automotive finishes to chilled-iron grit projected onto the surface under test to simulate the effect of stone chipping.
Results from the test specified in this document are not comparable with results specified in ISO 20567-1.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2811-3:2024(Main)
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)
EN ISO 2811-3:2023

ISO 2811-3:2011 specifies a method for determining the density of paints, varnishes and related products using an oscillator.
The method is suitable for all materials, including paste-like coatings. If a pressure-resistant type of apparatus is used, the method is also applicable to aerosols.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8130-15:2024(Main)
Coating powders - Part 15: Rheology (ISO 8130-15:2023)
EN ISO 8130-15:2023

This document specifies methods for the determination of the rheological behaviour of a coating powder both in particulate and molten form.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4628-6:2023(Main)
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2023)
EN ISO 4628-6:2023

This document provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22553-15:2023(Main)
Paints and varnishes - Electro-deposition coatings - Part 15: Permeate residues (ISO 22553-15:2022)
EN ISO 22553-15:2023

This document specifies a test method for estimating the influence of jetting liquids from the rinsing
process after electro-deposition coating (permeate residues) on a coating.
It applies to electro-deposition coatings for automotive industries and other general industrial
applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8130-16:2023(Main)
Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022)
EN ISO 8130-16:2023

This document specifies a method for determining the density of coating powders by liquid displacement
in a measuring cylinder. The method is based on a determination of the mass and the volume of a test
portion. It can be used for all types of coating powders.
NOTE If the powder does not swell in contact with the displacement liquid used and if the displacement liquid
replaces the air between the powder particles, it can then be used and compared with the method described in
ISO 8130-3.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22553-16:2023(Main)
Paints and varnishes - Electro-deposition coatings - Part 16: Pigment-binder ratio (ISO 22553-16:2022)
EN ISO 22553-16:2023

This document specifies a test method for determining the pigment-binder ratio.
It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11997-3:2023(Main)
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction (ISO 11997-3:2022)
EN ISO 11997-3:2023

This document specifies a method based on a cyclic corrosion test for testing the corrosion protection of automobiles using coating systems on aluminium, steel or galvanized steel.
The test method uses corrosive conditions (temperature and humidity ramps and salt spray) to create realistic corrosion patterns. These corrosion patterns are typical for automobiles, and they are comparable in the case of sufficiently similar protective coating systems. In particular, the accelerated test investigates the delamination/corrosion creep that results from defined artificial damage to a coating. Investigations of surface and edge corrosion or investigations of adhesive specimens or components are also covered. This cyclic corrosion test is also suitable for testing corrosion in flanged areas or near gaps.
This document was developed for the assessment of coated substrates (test specimens, bodywork and mounted parts) in the automotive industry. Other applications, such as components with unpainted metallic coatings, were not part of the scope of the standardization work. This document was originally developed for coating systems on aluminium, steel or galvanized steel but it can also be used for the assessment of the corrosion resistance of coating systems on other metals and their alloys.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20567-2:2023(Main)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023)
EN ISO 20567-2:2023

ISO 20567-2:2017 specifies a method for the evaluation of the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body projected onto the surface under test to simulate the impact of stones.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4624:2023(Main)
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
EN ISO 4624:2023

ISO 4624:2016 specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.
These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.
The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. To avoid distortion of the substrate during the tensile test, it is common to use a sandwich construction. For example, for special purposes, the coating may be applied directly to the face of a test dolly.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day