SIST EN 62052-11:2004
(Main)Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
This part of IEC 62052 covers type tests for electricity metering equipment for indoor and
outdoor application and applies to newly manufactured equipment designed to measure the
electrical energy on 50 Hz or 60 Hz networks, with a voltage up to 600 V.
It applies to electromechanical or static meters for indoor and outdoor application consisting
of a measuring element and register(s) enclosed together in a meter case. It also applies to
operation indicator(s) and test output(s). If the meter has a measuring element for more than
one type of energy (multi-energy meters), or when other functional elements, such as
maximum demand indicators, electronic tariff registers, time switches, ripple control receivers,
data communication interfaces, etc. are enclosed in the meter case, then the relevant
standards for these elements apply.
It does not apply to:
a) portable meters;
b) data interfaces to the register of the meter;
c) reference meters.
For rack-mounted meters, the mechanical properties are not covered in this standard.
Wechselstrom-Elektrizitätszähler - Allgemeine Anforderungen, Prüfungen und Prüfbedingungen - Teil 11: Messeinrichtungen
Equipement de comptage de l'électricité (CA) - Prescriptions générales, essais et conditions d'essai - Partie 11: Equipement de comptage
Couvre les essais de type pour équipements de comptage d'électricité neufs de type intérieur et extérieur, destinés à la mesure de l'énergie électrique sur des réseaux de fréquence de 50 Hz ou 60 Hz, et avec une tension jusqu'à 600 V. Elle n'est applicable qu'aux compteurs électromécaniques ou statiques de types intérieur et extérieur constitués d'un élément de mesure et d'un (des) élément(s) indicateur(s) rassemblés dans un même boîtier.
Oprema za merjenje električne energije (izmenični tok) - Splošne zahteve, preskusi in preskuševalni pogoji - 11. del: Merilna oprema (IEC 62052-11:2003) (IEC 62052-11:2003)
Ta del standarda IEC 62052 zajema tipsko preskušanje opreme za merjenje električne energije za zunanjo in notranjo montažo in se uporablja za novo izdelano opremo za merjenje električne energije v omrežju 50 Hz ali 60 Hz z napetostjo do 600 V.
Uporablja se za elektromehanske ali statične števce za notranjo in zunanjo montažo, sestavljene iz merilnega elementa in zapisovalnika, priloženega v merilnem ohišju. Uporablja se tudi kot indikator obratovanja in preskusni izhod. Če ima števec merilni element za več vrst energije (multi energijski števci) ali če so drugi funkcionalni elementi, kot so indikatorji maksimuma, elektronski tarifni registri, časovna stikala, kontrolni prejemniki nihanj, podatkovni komunikacijski vmesniki itd., priloženi v merilno ohišje, se uporabljajo ustrezni standardi za te elemente.
Ne uporablja se za:
a) prenosne števce;
b) podatkovne vmesnike, povezane v register števca;
c) referenčne števce.
Ta standard ne zajema mehanskih lastnosti števcev, montiranih v omarici.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62052-11:2004
01-januar-2004
1DGRPHãþD
SIST EN 61036:1998/A1:2001
2SUHPD]DPHUMHQMHHOHNWULþQHHQHUJLMH L]PHQLþQLWRN 6SORãQH]DKWHYHSUHVNXVL
LQSUHVNXãHYDOQLSRJRMLGHO 0HULOQDRSUHPD ,(& ,(&
Electricity metering equipment (AC) - General requirements, tests and test conditions -
Part 11: Metering equipment
Wechselstrom-Elektrizitätszähler - Allgemeine Anforderungen, Prüfungen und
Prüfbedingungen - Teil 11: Messeinrichtungen
Equipement de comptage de l'électricité (CA) - Prescriptions générales, essais et
conditions d'essai - Partie 11: Equipement de comptage
Ta slovenski standard je istoveten z: EN 62052-11:2003
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST EN 62052-11:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 62052-11
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2003
ICS 17.220.20
English version
Electricity metering equipment (AC) -
General requirements, tests and test conditions
Part 11: Metering equipment
(IEC 62052-11:2003)
Equipement de comptage Wechselstrom-Elektrizitätszähler -
de l'électricité (CA) - Allgemeine Anforderungen, Prüfungen
Prescriptions générales, essais und Prüfbedingungen
et conditions d'essai Teil 11: Messeinrichtungen
Partie 11: Equipement de comptage (IEC 62052-11:2003)
(CEI 62052-11:2003)
This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62052-11:2003 E
---------------------- Page: 2 ----------------------
EN 62052-11:2003 - 2 -
Foreword
The text of document 13/1285/FDIS, future edition 1 of IEC 62052-11, prepared by IEC TC 13,
Equipment for electrical energy measurement and load control, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 62052-11 on 2003-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-03-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, B, C, D and ZA are normative and annexes E and F are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62052-11:2003 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62052-11:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60038 (mod) 1983 HD 472 S1 1989
IEC st
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.