iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 16228-6:2014/kprA1:2021

(Amendment)

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment

This European Standard, together with part 1, deals with all significant hazards for jetting, grouting and injection equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014
This document does not repeat the requirements from EN 16228 1:2014, but adds or replaces the requirements for application for jetting, grouting and injection equipment.
Rigs for drilling, vibrating, pile driving, to be used for preparing holes for these applications are covered by EN 16228 2:2014 and/or EN 16228 4:2014.
Jetting, grouting and injection equipment is used in the preparation, transfer and application of grouting materials used for either:
-   the improvement of ground condition; or
-   the filling of voids e.g. around piles or ground anchors.
Jetting, grouting and injection equipment are constituted by all equipment and installations, operated by hand or electrically, pneumatically, mechanically or hydraulically powered, necessary for the following:
-   mixing, storing, measuring and pumping of substances (cement suspension, mortar or chemical liquids/mixtures);
-   jetting, grouting and injection processes (of/into subsoil) with low, medium or high pressure or vacuum systems;
-   all types of pressure and wear resistant grout hoses, fittings, quick release coupling with thread or hose connection, ball valves and flexible pipes;
-   all control systems, electrical or mechanical pressure and flow recorders, for monitoring the grouting;
-   all jetting, grouting and injection accessories, such as: special tools, lances, rods, sockets, packers, retention clamps and swivel hooks.

Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 6: Geräte für Injektionsarbeiten

Machines de forage et de fondation - Sécurité - Partie 6 : Machines pour traitement des sols par injection et machines pour injection des sols par jet

Dernier alinéa, supprimer le tiret "- tous les types de tuyauteries de cimentation, de raccords à couplage rapide ou filetés, de flexibles de liaison, de soupapes et de conduites flexibles résistant à la pression et à l'abrasion;".
Ajouter le texte suivant à la toute fin du paragraphe:
"Le présent document ne s'applique pas aux machines et équipements pour le transport, la projection et la distribution du béton et du mortier (couvertes par la norme EN 12001).
Le présent document ne traite pas des unités de projection, de coulis ou d'injection destinées à utiliser des produits générant des gaz toxiques".

Oprema za vrtanje in temeljenje - Varnost - 6. del: Oprema za vpihavanje, nanašanje malte in vbrizgavanje - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
24-Jul-2019
ICS
53.100 - Earth-moving machinery
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
I13 - Imaginarni 13
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
14-Sep-2021
Due Date
02-Nov-2021
Completion Date
14-Sep-2021
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 16228-6:2014/FprA1 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment

Relations

Consolidated By
SIST EN 16228-6:2014+A1:2022 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
Effective Date
19-Jan-2023
Consolidated By
SIST EN 16228-6:2014+A1:2022 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
Effective Date
18-Jan-2023
Consolidated By
SIST EN 16228-6:2014+A1:2022 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
Effective Date
03-Nov-2021
Amends
SIST EN 16228-6:2014 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
Effective Date
09-Nov-2016

Buy Standard

EN 16228-6:2014/oprA1:2019EN 16228-6:2014/oprA1:2019
PreviousNext
Draft
EN 16228-6:2014/oprA1:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16228-6:2014/oprA1:2019
01-julij-2019
Oprema za vrtanje in temeljenje - Varnost - 6. del: Oprema za vpihavanje,
nanašanje malte in vbrizgavanje - Dopolnilo A1
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection
equipment
Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 6: Geräte für
Injektionsarbeiten
Machines de forage et de fondation - Sécurité - Partie 6 : Machines pour traitement des
sols par injection et machines pour injection des sols par jet
Ta slovenski standard je istoveten z: EN 16228-6:2014/prA1
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN 16228-6:2014/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16228-6:2014/oprA1:2019

---------------------- Page: 2 ----------------------

SIST EN 16228-6:2014/oprA1:2019


DRAFT
EUROPEAN STANDARD
EN 16228-6:2014
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
May 2019
ICS 93.020
English Version

Drilling and foundation equipment - Safety - Part 6: Jetting,
grouting and injection equipment
Machines de forage et de fondation - Sécurité - Partie 6 Geräte für Bohr- und Gründungsarbeiten - Sicherheit -
: Machines pour traitement des sols par injection et Teil 6: Geräte für Injektionsarbeiten
machines pour injection des sols par jet
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 151.

This draft amendment A1, if approved, will modify the European Standard EN 16228-6:2014. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16228-6:2014/prA1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 16228-6:2014/oprA1:2019
EN 16228-6:2014/prA1:2019 (E)
Contents Page
European foreword . 3
1 Modification to the whole text . 4
2 Modification to Clause 2, Normative References . 4
3 Modification to Clause 4 “List of additional significant hazards” . 5
4 Modification to Subclause 5.2.1 “Fluid pumps, hoses and mixers” . 5
5 Modification to Subclause 5.2.2 “Working conditions” . 5
6 Deletion of Subclause 5.2.3 “Additional requirements for hazardous gases” . 5
7 Deletion of Subclause 5.2.5 “Additional requirements for hoses used for jet-
grouting” . 5
8 Modification to Subclause 5.2.6 “Emergency stops for jet-grouting” . 6
9 Deletion of Subclause 5.2.8 “Burst safety factors for jet-grouting hoses”
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16228-4:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
EN 16228-4:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021 but adds or replaces the requirements for application for foundation equipment.
In this document the general term "foundation equipment" covers several different types of machines used for installation and/or extracting by drilling (machines with a rotary torque greater than 35 kNm), driving, vibrating, pushing, pulling or a combination of techniques, or any other way, of:
-   longitudinal foundation elements;
-   soil improvement by vibrating and soil mixing techniques;
-   vertical drainage.
NOTE   Some foundation equipment may have an additional rotary head with a torque less than 35 kNm for pre-drilling applications; this equipment is covered by this standard.
Machines with one or more of the following characteristics are not covered by this standard, but are covered by EN 16228-2:
-   machines that have a main rotary head torque of less than 35 kNm;
-   machines that have multi-directional drilling capability;
-   machines for which adding and removing rods or digging and drilling tools etc. is usually required during the installation/extraction process.
Typically the process of foundation techniques involves the installation of longitudinal elements such as concrete piles, steel beams, tubes and sheet piles, injection elements as tubes and hoses and casings for cast in situ.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-6:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
EN 16228-6:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for jetting, grouting and injection equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for jetting, grouting and injection equipment.
Rigs for drilling, vibrating, pile driving, to be used for preparing holes for these applications are covered by EN 16228-2:2014+A1:2021 and/or EN 16228-4:2014+A1:2021.
Jetting, grouting and injection equipment is used in the preparation, transfer and application of grouting materials used for either:
-   the improvement of ground condition; or
-   the filling of voids e.g. around piles or ground anchors.
Jetting, grouting and injection equipment are constituted by all equipment and installations, operated by hand or electrically, pneumatically, mechanically or hydraulically powered, necessary for the following:
-   mixing, storing, measuring and pumping of substances (cement suspension, mortar or chemical liquids/mixtures);
-   jetting, grouting and injection processes (of/into subsoil) with low, medium or high pressure or vacuum systems;
-   deleted text
-   all control systems, electrical or mechanical pressure and flow recorders, for monitoring the grouting;
-   all jetting, grouting and injection accessories, such as: special tools, lances, rods, sockets, packers, retention clamps and swivel hooks.
This document does not apply to machines and equipment for conveying, spraying and placing concrete and mortar (covered by EN 12001).
This document does not deal with jetting, grouting or injection units intended to use products that generate toxic gases.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering, "deleted text" when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014+A1:2021.
This document does not repeat the requirements from EN 16228 1:2014+A1:2021, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning and tunnelling;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   EN 16228-4:2014+A1:2021 covers machines with a rotary torque greater than 35 kNm.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.
The following machines are excluded from the scope of this document:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e. g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand covered by EN 12348;
-   hand-held machines (in particular machines covered by ISO 11148-5).
This document is not applicable to mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-3:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-3:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-1:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 16228-1:2014+A1:2021

This European Standard specifies the common safety requirements for drilling and foundation equipment.
Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
NOTE 1   The requirements specified in this part of the standard are common to two or more families of drilling and foundation equipment.
This document gives safety requirements for all types of drilling and foundation equipment and is intended to be used in conjunction with one of parts 2 to 7. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of drilling and foundation equipment in question.
For multipurpose machinery, the parts of the standard that cover the specific functions and applications are used, e.g. a drilling machine also used as a piling machine will use the relevant requirements of EN 16228-1, EN 16228-2, and EN 16228-4.
The following machines are excluded from the scope of this standard:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to EN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e.g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand (covered by EN 12348);
-   hand-held machines (in particular machines covered by ISO 11148-5).
NOTE 2   Specific requirements for offshore applications are not covered by this European Standard.
Where a drilling or foundation equipment of fixed configuration that is not intended to be separated is assembled using a carrier based on earth-moving equipment, agricultural equipment, or a crane, then the completed assembly is !covered by this" standard.
Drilling and foundation equipment within the scope of EN 16228 parts 1 to 6 may include interchangeable auxiliary equipment within the scope of EN 16228-7, either as an integral part of its construction or as interchangeably fitted equipment.
!If drilling and foundation equipment is intended to be used in a potentially explosive atmosphere, or in case of lightning risk, additional requirements will need to be met which are not covered by this document.
This document is not applicable to drilling and foundation equipment manufactured before the date of its publication."

  • Standard
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-7:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
EN 16228-7:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for interchangeable auxiliary equipment.
This document specifies the specific safety requirements for interchangeable auxiliary equipment to be used in drilling and foundation operations, connected with drilling and foundation equipment, agricultural equipment and/or earth moving machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
Interchangeable auxiliary equipment includes pile installation and extraction equipment, impact hammers, extractors, vibrators, deep vibrators, static pile pushing/pulling devices, rotary percussion hammers, rotary drilling drives, drill mast equipment such as leaders equipped with a drill stem and gears attached to the boom of an excavator and casing oscillators/rotators.
Diaphragm wall cutting tools are dealt with in EN 16228-5:2014+A1:2021.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-5:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
EN 16228-5:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for diaphragm walling equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for diaphragm walling equipment.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-1:2014(Main)
Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 16228-1:2014

EN 16228-1 specifies the common safety requirements for drilling and foundation equipment. Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).

  • Standard
    152 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-4:2014(Main)
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
EN 16228-4:2014

EN 16228-4, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014 This document does not repeat the requirements from EN 16228-1:2014 but adds or replaces the requirements for application for foundation equipment. In this document the general term “foundation equipment” covers several different types of machines used for installation and/or extracting by drilling (machines with a rotary torque greater than 35 kNm), driving, vibrating, pushing, pulling or a combination of techniques, or any other way, of: - longitudinal foundation elements; - soil improvement by vibrating and soil mixing techniques; - vertical drainage.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-5:2014(Main)
Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
EN 16228-5:2014

EN 16228-5, together with part 1, deals with all significant hazards for diaphragm walling equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day