oSIST prEN 15088:2016

Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery

This European Standard specifies requirements for semi-finished products and castings of aluminium and aluminium alloys for load-bearing structural construction works (Construction works covers building and civil engineering works). It also specifies requirements for evaluation of conformity and the test methods to be used. It does not apply to products after machining or joining operations (e.g. bolting, welding of elements), which can be found in other European Standards, e.g. prEN 1090-1

Aluminium und Aluminiumlegierungen - Erzeugnisse für Tragwerksanwendungen - Technische Lieferbedingungen

Diese Europäische Norm legt die Anforderungen an die Konformitätsbewertung von Leistungseigenschaften für halbfertige tragende Aluminiumbauprodukte fest, die für tragende Bauwerke, die Hoch- und Ingenieurbauwerke gleichermaßen umfassen, verwendet werden.
Diese Europäische Norm legt Erzeugniseigenschaften, Prüfbewertung, Probenahmeverfahren und Konformitätsbewertung unter Berücksichtigung von Produktionseigenschaften fest.
Diese Europäische Norm umfasst Halbzeuge, die ohne weitere Bearbeitung (z. B. Schneiden, Bohren) möglicherweise nicht in tragende Erzeugnisse passen.
Diese Europäische Norm gilt nicht für Erzeugnisse, die aus Halbzeugen erstellt wurden und nach ihrer Veränderung an bestimmten tragenden Bauprodukten verwendet werden, wie in EN 1090-1 beschrieben.
Diese Europäische Norm gilt nicht für Bauprodukte, die durch Verbindungsarbeiten hergestellt werden (z. B. Verbolzen, Schweißen), wie in EN 1090-1 beschrieben.

Aluminium et alliages d'aluminium - Produits pour applications de structure pour construction - Conditions techniques de contrôle et de livraison

La présente Norme européenne spécifie les exigences pour l’évaluation de la conformité aux caractéristiques de performance pour les demi-produits structuraux de construction en aluminium qui sont utilisés sur les ouvrages de construction structurels porteurs, englobant à la fois les ouvrages de bâtiments et de génie civil.
La présente Norme européenne spécifie les caractéristiques du produit, l'évaluation par des essais, les méthodes d'échantillonnage et l'évaluation de la conformité couvrant les caractéristiques de fabrication.
La présente Norme européenne couvre les demi-produits qui peuvent ne pas constituer des produits structuraux sans transformation supplémentaire (par exemple découpe, perçage).
La présente Norme européenne ne s’applique pas aux produits qui sont fabriqués à partir de demi-produits et qui après transformation sont utilisés sur des produits de construction structurels particuliers, couverts par l'EN 1090-1.
La présente Norme européenne ne s’applique pas aux produits de construction qui sont fabriqués par des opérations d’assemblage (par exemple boulonnage, soudage), couverts par l'EN 1090-1.

Aluminij in aluminijeve zlitine - Gradbeni proizvodi za konstrukcijska dela - Tehnični pogoji za prevzem in dobavo

General Information

• Status: Not Published
• Public Enquiry End Date: 06-Nov-2016
• ICS: 77.150.10 - Aluminium products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 13-May-2024
• Due Date: 18-May-2024
• Completion Date: 13-May-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: prEN 15088 - Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery

Relations

• Revised: SIST EN 15088:2006 - Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
• Effective Date: 19-Jan-2023
• Revised: SIST EN 15088:2006 - Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
• Effective Date: 18-Jan-2023
• Revised: SIST EN 15088:2006 - Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
• Effective Date: 01-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15088:2016
01-oktober-2016
$OXPLQLMLQDOXPLQLMHYH]OLWLQH*UDGEHQLSURL]YRGL]DNRQVWUXNFLMVNDGHOD
7HKQLþQLSRJRML]DSUHY]HPLQGREDYR
Aluminium and aluminium alloys - Structural products for construction works - Technical
conditions for inspection and delivery
Aluminium und Aluminiumlegierungen - Erzeugnisse für Tragwerksanwendungen -
Technische Lieferbedingungen
Aluminium et alliages d'aluminium - Produits pour applications de structure pour
construction - Conditions techniques de contrôle et de livraison
Ta slovenski standard je istoveten z: prEN 15088
ICS:
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 15088:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15088:2016

---------------------- Page: 2 ----------------------
oSIST prEN 15088:2016


DRAFT
EUROPEAN STANDARD
prEN 15088
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2016
ICS 77.150.10 Will supersede EN 15088:2005
English Version

Aluminium and aluminium alloys - Structural products for
construction works - Technical conditions for inspection
and delivery"
Aluminium et alliages d'aluminium - Produits pour Aluminium und Aluminiumlegierungen - Erzeugnisse
applications de structure pour construction - für Tragwerksanwendungen - Technische
Conditions techniques de contrôle et de livraison Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15088:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15088:2016
prEN 15088:2016 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols, units and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 9
3.3 Symbols . 9
4 Products characteristics . 10
4.1 General .
...