iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13044:2000

(Main)

Swap bodies - Coding, identification and marking

Swap bodies - Coding, identification and marking

1.1 This European Standard provides a system for the identification and presentation of information about swap bodies. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the swap bodies and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport. The methods of displaying identification and certain other data (including operational data) on swap bodies by means of permanent marks are included.

Wechselbehälter - Kodierung, Identifizierung und Kennzeichnung

1.1 Diese Europäische Norm stellt ein System zur Identifizierung von Wechselbehältern sowie für das Anzeigen der Informationen am Wechselbehälter selbst bereit. Das Identifizierungssystem ist sowohl für die allgemeine Anwendung zu benutzen, wie z.B. bei der Dokumentation, Steuerung und Kommunikation (einschließlich automatischer Datenverarbeitungssysteme), als auch für das Anzeigen der Informationen an Wechselbehältern und "Nicht-ISO-Containern" (deren Dimensionen und Testparameter z.B. von den ISO-Normen abweichen) die im europäischen Transport benutzt werden.

Caisses mobiles - Codage, identification et marquage

1.1 La présente norme européenne établit un systeme pour l'identification et la présentation d'informations relatives aux caisses mobiles. Ce systeme d'identification est prévu pour une application générale, p.e. pour la documentation, le contrôle et les communications (y compris les systemes de traitement automatique des données), aussi bien que pour l'affichage sur les caisses mobiles et autres conteneurs non ISO (c.-a-d. ceux dont les dimensions et les valeurs d'essais different de celles définies par les normes ISO applicables) utilisés en transport européen.

Swap bodies - Coding, identification and marking

General Information

Status
Withdrawn
Publication Date
30-Nov-2000
Withdrawal Date
13-Sep-2011
ICS
35.240.60 - IT applications in transport
55.180.10 - General purpose containers
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Sep-2011
Due Date
06-Oct-2011
Completion Date
14-Sep-2011
Ref Project
EN 13044:2000 - Swap bodies - Coding, identification and marking

Relations

Replaced By
SIST EN 13044-3:2011 - Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation
Effective Date
01-Nov-2011
Replaced By
SIST EN 13044-1:2011 - Intermodal Loading Units - Marking - Part 1: Markings for identification
Effective Date
01-Nov-2011
Replaced By
SIST EN 13044-2:2011 - Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation
Effective Date
01-Nov-2011
Replaced By
SIST EN 13044-3:2011 - Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation
Effective Date
08-Jun-2022
Replaced By
SIST EN 13044-2:2011 - Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation
Effective Date
08-Jun-2022
Replaced By
SIST EN 13044-1:2011 - Intermodal Loading Units - Marking - Part 1: Markings for identification
Effective Date
08-Jun-2022

Buy Standard

EN 13044:2000EN 13044:2000
PreviousNext
Standard
EN 13044:2000
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Swap bodies - Coding, identification and markingWechselbehälter - Kodierung, Identifizierung und KennzeichnungCaisses mobiles - Codage, identification et marquageSwap bodies - Coding, identification and marking55.180.10General purpose containers35.240.60Uporabniške rešitve IT v transportu in trgoviniIT applications in transport and tradeICS:Ta slovenski standard je istoveten z:EN 13044:2000SIST EN 13044:2000en01-dece
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13044-1:2011/AC:2014(Corrigendum)
Intermodal Loading Units - Marking - Part 1: Markings for identification
EN 13044-1:2011/AC:2014

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on an ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on swap bodies by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This Part of EN 13044 specifies a system to identify the owner of the ILU, which includes an associated system for verifying the accuracy of its use.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.
NOTE   Some of the major international conventions whose container-marking requirements are not covered in this European Standard are as follows:
-   International Convention for Safe Containers (UN/IMO 1992);
-   Customs Convention on Containers 1956 and 1972;
-   Customs Convention on International Movement of Goods under Cover of TIR Carnets (TIR-Convention) 1959 and 1975.
It should not to be assumed that this list is exhaustive.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13044-3:2011(Main)
Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation
EN 13044-3:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on the ILU by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This part of the European Standard prescribes the operational markings, which are necessary additionally to those for railway operation. Such markings are size and type codes and the related markings, and signs for limitations and warnings.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.
NOTE   Some of the major international conventions whose container-marking requirements are not covered in this European Standard are as follows:
-   International Convention for Safe Containers (UN/IMO 1992);
-   Customs Convention on Containers 1956 and 1972;
-   Customs Convention on International Movement of Goods under Cover of TIR Carnets (TIR-Convention) 1959 and 1975.
It should not to be assumed that this list is exhaustive.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13044-2:2011(Main)
Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation
EN 13044-2:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on the ILU by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This Part of EN 13044 specifies a system to identify the ability of an ILU to be operated at the European railway network. It combines the dimensions of an ILU with the size profile of the railway network to enable the user to select such parts of a railway network on which the ILU can be transported without danger.
This part of the European Standard prescribes the system of operational data fort he codification of the ILU. The codification assigns a maximum profile for the at the rail tracks available cover area to the ILU in order to enable the selection of those rail tracks on which this ILU can be transported without any danger.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13044-1:2011(Main)
Intermodal Loading Units - Marking - Part 1: Markings for identification
EN 13044-1:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on an ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on swap bodies by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This Part of EN 13044 specifies a system to identify the owner of the ILU, which includes an associated system for verifying the accuracy of its use.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.
NOTE   Some of the major international conventions whose container-marking requirements are not covered in this European Standard are as follows:
-   International Convention for Safe Containers (UN/IMO 1992);
-   Customs Convention on Containers 1956 and 1972;
-   Customs Convention on International Movement of Goods under Cover of TIR Carnets (TIR-Convention) 1959 and 1975.
It should not to be assumed that this list is exhaustive.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13044-1:2011/AC:2014(Corrigendum)
Intermodal Loading Units - Marking - Part 1: Markings for identification
EN 13044-1:2011/AC:2014

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on an ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on swap bodies by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This Part of EN 13044 specifies a system to identify the owner of the ILU, which includes an associated system for verifying the accuracy of its use.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.
NOTE   Some of the major international conventions whose container-marking requirements are not covered in this European Standard are as follows:
-   International Convention for Safe Containers (UN/IMO 1992);
-   Customs Convention on Containers 1956 and 1972;
-   Customs Convention on International Movement of Goods under Cover of TIR Carnets (TIR-Convention) 1959 and 1975.
It should not to be assumed that this list is exhaustive.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13044-3:2011(Main)
Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation
EN 13044-3:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on the ILU by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This part of the European Standard prescribes the operational markings, which are necessary additionally to those for railway operation. Such markings are size and type codes and the related markings, and signs for limitations and warnings.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.
NOTE   Some of the major international conventions whose container-marking requirements are not covered in this European Standard are as follows:
-   International Convention for Safe Containers (UN/IMO 1992);
-   Customs Convention on Containers 1956 and 1972;
-   Customs Convention on International Movement of Goods under Cover of TIR Carnets (TIR-Convention) 1959 and 1975.
It should not to be assumed that this list is exhaustive.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13044-2:2011(Main)
Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation
EN 13044-2:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on the ILU by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This Part of EN 13044 specifies a system to identify the ability of an ILU to be operated at the European railway network. It combines the dimensions of an ILU with the size profile of the railway network to enable the user to select such parts of a railway network on which the ILU can be transported without danger.
This part of the European Standard prescribes the system of operational data fort he codification of the ILU. The codification assigns a maximum profile for the at the rail tracks available cover area to the ILU in order to enable the selection of those rail tracks on which this ILU can be transported without any danger.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13044-1:2011(Main)
Intermodal Loading Units - Marking - Part 1: Markings for identification
EN 13044-1:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on an ILU and other non ISO containers (i.e.: which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on swap bodies by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This Part of EN 13044 specifies a system to identify the owner of the ILU, which includes an associated system for verifying the accuracy of its use.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.
NOTE   Some of the major international conventions whose container-marking requirements are not covered in this European Standard are as follows:
-   International Convention for Safe Containers (UN/IMO 1992);
-   Customs Convention on Containers 1956 and 1972;
-   Customs Convention on International Movement of Goods under Cover of TIR Carnets (TIR-Convention) 1959 and 1975.
It should not to be assumed that this list is exhaustive.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day