SIST EN 60317-0-9:2016/A1:2024

Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire (IEC 60317-0-9:2015/AMD1:2024)

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-9: Allgemeine Anforderungen - Flachdrähte aus Aluminium, lackisoliert (IEC 60317-0-9:2015/AMD1:2024)

Spécifications pour types particuliers de fils de bobinage - Partie 0-9: Exigences générales - Fil de section rectangulaire émaillé en aluminium (IEC 60317-0-9:2015/AMD1:2024)

Specifikacije za posebne vrste navijalnih žic - 0-9. del: Splošne zahteve - Emajlirana pravokotna aluminijeva žica - Dopolnilo A1 (IEC 60317-0-9:2015/AMD1:2024)

General Information

• Status: Published
• Public Enquiry End Date: 30-Oct-2023
• Publication Date: 18-Aug-2024
• ICS: 29.060.10 - Wires
• ICS: 77.150.10 - Aluminium products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Aug-2024
• Due Date: 12-Oct-2024
• Completion Date: 19-Aug-2024
• Ref Project: EN 60317-0-9:2015/A1:2024 - Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire

Relations

• Amends: SIST EN 60317-0-9:2016 - Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
• Effective Date: 01-Sep-2024

Overview

EN 60317-0-9:2015/A1:2024 is an amendment to the European adoption of IEC 60317-0-9 that updates the general requirements for enamelled rectangular aluminium winding wire. Approved by CENELEC in July 2024, this amendment clarifies material references, testing atmospheres and some test applicability notes. It is relevant to manufacturers, test laboratories and design engineers working with aluminium winding wire for electrical applications.

Key Topics

• Normative references added: The amendment explicitly adds EN 1715-2 (Aluminium drawing stock - Part 2: specific requirements for electrical applications) and ASTM B233-97 (Aluminum 1350 drawing stock for electrical purposes) to the list of normative references.
• Material compliance: The document states that the aluminium rod used shall comply with EN 1715-2 and ASTM B233-97, aligning material supply with recognized electrical-grade aluminium specifications.
• Test atmosphere and preconditioning: Unless otherwise specified, tests shall be performed at temperatures between 15 °C and 40 °C and relative humidity between 25 % and 75 %. Specimens must be preconditioned under these conditions until stable prior to measurement.
• Test applicability: The amendment replaces previous guidance for the springiness test with a clear note: "Test inappropriate." This indicates that the springiness procedure from the main document is not applicable for this enamelled rectangular aluminium wire.
• Standards governance: The amendment was prepared by IEC TC 55 (Winding wires) and adopted as EN 60317-0-9:2015/A1:2024 by CENELEC, with national implementation dates and withdrawal timelines noted in the foreword.

Applications

This amendment supports consistent manufacture, testing and acceptance of enamelled rectangular aluminium wire used in:

• Coils and transformers - where rectangular aluminium conductors are used for space-efficient windings
• Winding wire production and quality control - harmonizing material and test requirements for suppliers and labs
• Electrical component design - providing assurance of material traceability and test conditions for design verification

While the document does not prescribe application-specific designs, it ensures baseline requirements and test conditions that improve interoperability and quality assurance across European and international markets.

Related Standards

• IEC 60317-0-9:2015 (base standard) - General requirements for enamelled rectangular aluminium wire
• EN 1715-2 - Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications (added as normative)
• ASTM B233-97 - Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes (added as normative)

For implementation, national committees and manufacturers should consult the full EN/IEC text and the CENELEC notices for national adoption dates and any patent or conformity considerations.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Specifikacije za posebne vrste navijalnih žic - 0-9. del: Splošne zahteve -
Emajlirana pravokotna aluminijeva žica - Dopolnilo A1 (IEC 60317-0-
9:2015/AMD1:2024)
Specifications for particular types of winding wires - Part 0-9: General requirements -
Enamelled rectangular aluminium wire (IEC 60317-0-9:2015/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-9:
Allgemeine Anforderungen - Flachdrähte aus Aluminium, lackisoliert (IEC 60317-0-
9:2015/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 0-9: Exigences
générales - Fil de section rectangulaire émaillé en aluminium (IEC 60317-0-
9:2015/AMD1:2024)
Ta slovenski standard je istoveten z: EN 60317-0-9:2015/A1:2024
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60317-0-9:2015/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 0-9:
General requirements - Enamelled rectangular aluminium wire
(IEC 60317-0-9:2015/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 0-9: Exigences générales - Fil de section Wickeldrähten - Teil 0-9: Allgemeine Anforderungen -
rectangulaire émaillé en aluminium Flachdrähte aus Aluminium, lackisoliert
(IEC 60317-0-9:2015/AMD1:2024) (IEC 60317-0-9:2015/AMD1:2024)
This amendment A1 modifies the European Standard EN 60317-0-9:2015; it was approved by CENELEC on 2024-07-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-0-9:2015/A1:2024 E

European foreword
The text of document 55/1978/CDV, future IEC 60317-0-9/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-0-
9:2015/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-0-9:2015/AMD1:2024 was approved by CENELEC
as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Add the following references:
Publication Year Title EN/HD Year
- - Aluminium and aluminium alloys – Drawing EN 1715-2 -
stock – Part 2: Specific requirements for
electrical applications
ASTM B233-97 - Standard Specification for Aluminum 1350 - -
Drawing Stock for Electrical Purposes

IEC 60317-0-9 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –

Part 0-9: General requirements – Enamelled rectangular aluminium wire

Spécifications pour types particuliers de fils de bobinage –

Partie 0-9: Exigences générales – Fil de section rectangulaire émaillé en

aluminium
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
...