SIST EN IEC 60317-27-1:2020/A1:2025

Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire (IEC 60317-27-1:2020/AMD1:2024)

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-1: Runddrähte aus Kupfer, papierisoliert (IEC 60317-27-1:2020/AMD1:2024)

Spécifications pour types particuliers de fils de bobinage - Partie 27-1: Fil de section circulaire en cuivre recouvert de ruban papier (IEC 60317-27-1:2020/AMD1:2024)

Specifikacije za posebne vrste navijalnih žic - 27-1. del: S papirnim trakom ovita okrogla bakrena žica - Dopolnilo A1 (IEC 60317-27-1:2020/AMD1:2024)

General Information

• Status: Published
• Public Enquiry End Date: 30-May-2024
• Publication Date: 08-Dec-2024
• ICS: 29.060.10 - Wires
• ICS: 77.150.30 - Copper products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 27-Nov-2024
• Due Date: 01-Feb-2025
• Completion Date: 09-Dec-2024
• Ref Project: EN IEC 60317-27-1:2020/A1:2024 - Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire

Relations

• Amends: SIST EN IEC 60317-27-1:2020 - Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire (IEC 60317-27-1:2020)
• Effective Date: 14-Feb-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2025
Specifikacije za posebne vrste navijalnih žic - 27-1. del: S papirnim trakom ovita
okrogla bakrena žica - Dopolnilo A1 (IEC 60317-27-1:2020/AMD1:2024)
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round
copper wire (IEC 60317-27-1:2020/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 27-1:
Runddrähte aus Kupfer, papierisoliert (IEC 60317-27-1:2020/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 27-1: Fil de section
circulaire en cuivre recouvert de ruban papier (IEC 60317-27-1:2020/AMD1:2024)
Ta slovenski standard je istoveten z: EN IEC 60317-27-1:2020/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60317-27-1:2020/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM November 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 27-1:
Paper tape covered round copper wire
(IEC 60317-27-1:2020/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 27-1 : Fil de section circulaire en cuivre recouvert de Wickeldrähten - Teil 27-1: Runddrähte aus Kupfer,
ruban papier papierisoliert
(IEC 60317-27-1:2020/AMD1:2024) (IEC 60317-27-1:2020/AMD1:2024)
This amendment A1 modifies the European Standard EN IEC 60317-27-1:2020; it was approved by CENELEC on 2024-11-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60317-27-1:2020/A1:2024 E

European foreword
The text of document 55/2053/FDIS, future edition 1 of IEC 60317-27-1/AMD1, prepared by TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-11-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-27-1:2020/AMD1:2024 was approved by CENELEC
as a European Standard without any modification.

IEC 60317-27-1 ®
Edition 1.0 2024-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –

Part 27-1: Paper tape covered round copper wire

Spécifications pour types particuliers de fils de bobinage –

Partie 27-1: Fil de section circulaire en cuivre recouvert de ruban papier

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10  ISBN 978-2-8322-9810-7

----------
...