SIST EN 14288:2004

Leather - Physical and mechanical tests - Determination of fogging characteristics

This European Standard specifies two alternative methods for determining the fogging characteristics of leathers used in the passenger compartments of motor vehicles, namely Method A and Method B.  However, these are
2 different test procedures to measure the volatile components and there is no mathematical correlation between the results obtained with Method A and those with Method B.
Method A determines by reflection the light scattering properties (or opaqueness) and the nature of the film or droplet formation from volatile components condensed on a cold glass surface. Method B measures gravimetrically the quantity of volatile components condensed on a cold aluminium foil surface. Annex A gives the results of inter-laboratory trial which show that Method B performs well whereas Method A showed a large variation in the percentage reflection.
The test conditions allow the two tests to be carried out in succession.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der Fogging-Eigenschaften

Cuir - Essais physiques et mécaniques - Détermination des caractéristiques de la condensation provoquée par le cuir

La présente Norme européenne spécifie deux méthodes qu'il est possible d'utiliser afin de déterminer les caractéristiques de la condensation provoquée par les cuirs utilisés dans les compartiments passagers des véhicules a moteur. La méthode A préconise l'utilisation d'un réflectometre et la méthode B est une méthode gravimétrique. Les conditions d'essai permettent de mener les deux méthodes d'essai a la suite.

Usnje – Fizikalno in mehansko preskušanje – Ugotavljanje karakteristik meglenosti

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2004
• Withdrawal Date: 20-Sep-2011
• ICS: 59.140.30 - Leather and furs
• Technical Committee: IUSN - Leather
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Sep-2011
• Due Date: 13-Oct-2011
• Completion Date: 21-Sep-2011
• Ref Project: EN 14288:2003 - Leather - Physical and mechanical tests - Determination of fogging characteristics

Relations

• Replaced By: SIST EN ISO 17071:2011 - Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006)
• Effective Date: 01-Nov-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje – Fizikalno in mehansko preskušanje – Ugotavljanje karakteristik meglenostiLeder - Physikalische und mechanische Prüfungen - Bestimmung der Fogging-EigenschaftenCuir - Essais physiques et mécaniques - Détermination des caractéristiques de la condensation provoquée par le cuirLeather - Physical and mechanical tests - Determination of fogging characteristics59.140.30Usnje in kr
...