SIST EN ISO 11591:2021/A1:2023
(Amendment)Small craft - Field of vision from the steering position - Amendment 1 (ISO 11591:2020/Amd 1:2022)
Small craft - Field of vision from the steering position - Amendment 1 (ISO 11591:2020/Amd 1:2022)
Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand - Änderung 1 (ISO 11591:2020/Amd 1:2022)
No scope available
Petits navires - Champ de vision depuis le poste de pilotage - Amendement 1 (ISO 11591:2020/Amd 1:2022)
Mala plovila - Vidno polje izza krmila - Dopolnilo A1 (ISO 11591:2020/Amd 1:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11591:2021/A1:2023
01-maj-2023
Mala plovila - Vidno polje izza krmila - Dopolnilo A1 (ISO 11591:2020/Amd 1:2022)
Small craft - Field of vision from the steering position - Amendment 1 (ISO
11591:2020/Amd 1:2022)
Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand - Änderung 1 (ISO
11591:2020/Amd 1:2022)
Petits navires - Champ de vision depuis le poste de pilotage - Amendement 1 (ISO
11591:2020/Amd 1:2022)
Ta slovenski standard je istoveten z: EN ISO 11591:2020/A1:2023
ICS:
47.080 Čolni Small craft
SIST EN ISO 11591:2021/A1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11591:2021/A1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 11591:2021/A1:2023
EN ISO 11591:2020/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Field of vision from the steering position -
Amendment 1 (ISO 11591:2020/Amd 1:2022)
Petits navires - Champ de vision depuis le poste de Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand -
pilotage - Amendement 1 (ISO 11591:2020/Amd Änderung 1 (ISO 11591:2020/Amd 1:2022)
1:2022)
This amendment A1 modifies the European Standard EN ISO 11591:2020; it was approved by CEN on 29 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11591:2020/A1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11591:2021/A1:2023
EN ISO 11591:2020/A1:2023 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11591:2021/A1:2023
EN ISO 11591:2020/A1:2023 (E)
European foreword
This document (EN ISO 11591:2020/A1:2023) has been prepared by Technical Committee ISO/TC
188 "Small craft" in collaboration with Technical Committee CEN/TC 464 “Small Craft” the
secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 11591:2020 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by
September 2023, and conflicting national standards shall be withdrawn at the latest by September
2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an
integral part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Endorsement notice
The text of ISO 11591:2020/Amd 1:2022 has been approved by CEN as
EN ISO 11591:2020/A1:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11591:2021/A1:2023
EN ISO 11591:2020/A1:2023 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
M/542/C(2015) 8736 final to provide one voluntary means of conforming to essential
requirements of Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the
limits of the scope of this standard, a presumption of conformity with the corresponding essential
requirements of that Directive, and associated EFTA regulations.
Table ZA.1— Correspondence between this European Standard and Annex I and Annex II of
Directive 2013/53/EU
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Directive 2013/53/EU this EN
I.A.2.4 — Visibility from the 4, 5, 6, 7, Annex A This Standard specifies the field
main steering position of vision requirements from the
main steering position, both
forward and astern, in the
horizontal and vertical planes
for recreational craft as
specified in Article 3(2) of
Directive 2013/53/EU that fall
within its scope.
I.A.2.5 - Owner’s manual 8
4
---------------------- Page: 6 ----------------------
SIST EN ISO 11591:2021/A1:2023
EN ISO 11591:2020/A1:2023 (E)
Table ZA.2 — Applicable Standards to confer presumption of conformity as described in this
Annex ZA
Column 4
Column 1 Column 2
Column 3
Reference in International
Corresponding European
Title
Clause 2 Standard Edition
Standard Edition
Graphical symbols —
Safety colours and safety
ISO 7010:2019 ISO 7010:2019 EN ISO 7010:2020
signs — Registered safety
signs
Small craft — Graphical
ISO 11192:2005 ISO 11192:2005 EN ISO 11192:2018
symbols
The documents listed in the Column 1 of Table ZA.2, in whole or in part, are normatively referenced
in this document, i.e. are indispensable for its application. The achievement of the presumption of
conformity is subject to the application of the edition of Standards as listed in Column 4 or, if no
European Standard Edition exists, the International Standard Edition given in Column 2 of Table
ZA.2.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of
this standard should consult frequently the latest list published in the Official Journal of the
European Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope
of this standard.
5
---------------------- Page: 7 ----------------------
SIST EN ISO 11591:2021/A1:2023
---------------------- Page: 8 ----------------------
SIST EN ISO 11591:2021/A1:2023
INTERNATIONAL ISO
STANDARD 11591
Fourth edition
2020-10
AMENDMENT 1
2022-10
Small craft — Field of vision from the
steering position
AMENDMENT 1
Petits navires — Champ de vision depuis le poste de pilotage
AMENDEMENT 1
Reference number
ISO 11591:2020/Amd.1:2022(E)
© ISO 2022
---------------------- Page: 9 ----------------------
SIST EN ISO 11591:2021/A1:2023
ISO 11591:2020/Amd.1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserve
...
SLOVENSKI STANDARD
SIST EN ISO 11591:2021/oprA1:2022
01-maj-2022
Mala plovila - Vidno polje izza krmila - Dopolnilo A1 (ISO 11591:2020/DAM 1:2022)
Small craft - Field of vision from the steering position - Amendment 1 (ISO
11591:2020/DAM 1:2022)
Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand - Änderung 1 (ISO
11591:2020/DAM 1:2022)
Petits navires - Champ de vision depuis le poste de pilotage - Amendement 1 (ISO
11591:2020/DAM 1:2022)
Ta slovenski standard je istoveten z: EN ISO 11591:2020/prA1
ICS:
47.080 Čolni Small craft
SIST EN ISO 11591:2021/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
DRAFT AMENDMENT
ISO 11591:2020/DAM 1
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-03-18 2022-06-10
Small craft — Field of vision from the steering position
AMENDMENT 1: Title missing
AMENDEMENT 1: Titre manque
ICS: 47.080
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11591:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
ISO 11591:2020/DAM 1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
ISO 11591:2020/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO 11591:2020 was prepared by Technical Committee ISO/TC 188, Small craft.
This amendment 1 to ISO 11591:2020 was prepared by ISO/TC 188, Small craft.
The main changes compared to the previous edition are as follows:
— clarify the procedure to determine the level reference line and to verify the field of vision in the
vertical field.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
---------------------- Page: 6 ----------------------
SIST EN ISO 11591:2021/oprA1:2022
ISO 11591:2020/DAM 1:2022(E)
Small craft — Field of vision from the steering position
AMENDMENT 1: Title missing
Page iii, Contents
Add to the Contents after cl. 8:
Annex A (normative)
Clause 2
Remove the following normative reference:
ISO 10240:2019, Small craft – Owner’s manual
Page 4, Clause 4.2.2.2
Add after Clause 4.2.2.2 the following:
4.2.2.3 Annex A sets the procedure and methods to determine the level reference line and to verify
the field of vision in the vertical field for power driven craft with steering wheel or equivalent fixed
installed direct control
Clause 8.1
Remove the following text:
The owner's manual shall be in accordance with ISO 10240:2019 and shall include the following
information.
Instead of the removed text, add the following text:
An owner’s manual shall be provided with the craft and shall include the following information.
Clause 8.2
Remove the following text:
The owner's manual shall be in accordance with ISO 10240:2019 and shall include the following
information.
Instead of the removed text, add the following text:
An owner’s manual shall be provided with the craft and shall include the following information.
Clause 8.3
Remove the following text:
The owner's manual shall be in accordance with ISO 10240:2019 and shall include the following
information.
Instead of the removed text, add the following text:
An owner’s manual shall be provided with the craft and shall
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.