Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties

This document specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.
Annex C is included as a guide to the selection of alloys for a specific use or process.
This document is intended to be used in conjunction with EN 576, EN 1559-1, EN 1559-4, EN 1676 and EN ISO 8062-3.

Aluminium und Aluminiumlegierungen - Gussstücke - Chemische Zusammensetzung und mechanische Eigenschaften

Aluminium et alliages d'aluminium - Pièces moulées - Composition chimique et propriétés mécaniques

Aluminij in aluminijeve zlitine - Ulitki - Kemična sestava in mehanske lastnosti - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
19-Jan-2021
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
16-Sep-2021
Due Date
21-Sep-2021
Completion Date
16-Sep-2021

Relations

Buy Standard

Draft
EN 1706:2020/oprA1:2021
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2021
Aluminij in aluminijeve zlitine - Ulitki - Kemična sestava in mehanske lastnosti -
Dopolnilo A1
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical
properties
Aluminium und Aluminiumlegierungen - Gussstücke - Chemische Zusammensetzung
und mechanische Eigenschaften
Aluminium et alliages d'aluminium - Pièces moulées - Composition chimique et
propriétés mécaniques
Ta slovenski standard je istoveten z: EN 1706:2020/prA1:2020
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 1706:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2020
ICS 77.150.10
English Version
Aluminium and aluminium alloys - Castings - Chemical
composition and mechanical properties
Aluminium et alliages d'aluminium - Pièces moulées - Aluminium und Aluminiumlegierungen - Gussstücke -
Composition chimique et propriétés mécaniques Chemische Zusammensetzung und mechanische
Eigenschaften
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 132.

This draft amendment A1, if approved, will modify the European Standard EN 1706:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.