SIST EN 17072:2019
(Main)Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods
Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods
This document specifies safety requirements and test methods for children’s bath tubs and stands and for non-standalone bathing aids that are designed and intended to be used only in conjunction with a children’s bath tub.
This document does not cover children’s bath tubs and stands and non-standalone bathing aids designed for children with special needs.
NOTE 1 Standalone bathing aids are covered in EN 17022.
NOTE 2 Where the product has several functions or can be converted into another function it is due to comply with relevant standard(s).
Artikel für Säuglinge und Kleinkinder - Badewannen und Gestelle - Sicherheitsanforderungen und Prüfverfahren
Dieses Dokument legt sicherheitstechnische Anforderungen und Prüfverfahren für Kinderbadewannen und Gestelle sowie für nicht freistehende Badehilfen fest, die ausschließlich für die Verwendung in Kombination mit Kinderbadewannen ausgelegt und bestimmt sind.
Diese Europäische Norm gilt nicht für Badewannen und Gestelle sowie nicht freistehende Badehilfen, die für Kinder mit besonderen Bedürfnissen konzipiert sind.
ANMERKUNG 1 Freistehende Badehilfen werden in FprEN 17022 behandelt.
ANMERKUNG 2 Wenn das Produkt unterschiedliche Funktionen hat oder in eine andere Funktion umgewandelt werden kann, muss es mit der (den) entsprechenden Norm(en) übereinstimmen.
Articles de puériculture - Baignoires et supports - Exigences de sécurité et méthodes d'essai
Le présent document spécifie les exigences de sécurité et les méthodes d’essai relatives aux baignoires pour enfant et à leurs supports, et aux aides au bain non indépendantes conçues et destinées à être utilisées uniquement en conjonction avec une baignoire pour enfant.
Le présent document ne couvre pas les baignoires pour enfant et leurs supports et les aides au bain non indépendantes destinées aux enfants ayant des besoins particuliers.
NOTE 1 Les aides au bain non intégrées sont couvertes par l'EN 17022.
NOTE 2 Quand le produit possède plusieurs fonctions ou peut être converti en une autre fonction, la ou les normes applicables doivent être respectées.
Izdelki za otroke - Kopalne kadi, podstavki in nesamostoječi kopalni pripomočki - Varnostne zahteve in preskusne metode
Ta evropski standard določa varnostne zahteve in preskusne metode za otroške kopalne kadi in podstavke ter za nesamostoječe kopalne pripomočke, ki so namenjeni za uporabo v povezavi z otroško kadjo. Ta evropski standard ne zajema kopalnih kadi in kopalnih podstavkov, namenjenih otrokom s posebnimi potrebami. OPOMBA: Če ima izdelek več funkcij ali je mogoče njegovo funkcijo spremeniti, zanjo veljajo zadevni evropski standardi.
General Information
Overview
EN 17072:2018 - published by CEN - is the European standard that sets safety requirements and test methods for children’s bath tubs, bath stands and non-standalone bathing aids that are intended to be used only in conjunction with a children’s bath tub. It specifies mechanical and chemical safety criteria, conditioning and test procedures, and required product information. The standard explicitly excludes products designed for children with special needs and points users to EN 17022 for standalone bathing aids.
Key Topics and Requirements
- Scope and definitions: Clear coverage of bath tubs, stands and non-standalone bathing aids; exclusions and multi-function product notes.
- Test equipment: Defined test probes (finger and head entrapment), test masses, small parts cylinder, feeler gauge, impact and drop test surfaces, suction cup tests and more used to verify hazards.
- Mechanical hazards:
- Entrapment (finger and head) - shape and opening assessments using probes.
- Moving parts - compression and shear point evaluation.
- Entanglement, choking and ingestion - small parts, decals and packaging assessments.
- Stability and structural integrity - static strength, impact tests, thermal shock and requirements for stands and non-standalone aids.
- Wheels/castors and folding mechanisms - locking and folding safety tests.
- Chemical hazards: Migration of certain elements referenced to EN 71-3 for materials in contact with children.
- Product information: Mandatory marking, durable labeling, purchase information and comprehensive instructions for safe use (including maximum water levels for specific products).
- Test conditions and conditioning: Reference to conditioning standards (EN ISO 291) and material hardness (ISO 7619-1) for reproducible testing.
Applications and Who Uses It
EN 17072:2018 is essential for:
- Manufacturers and designers of children’s bath tubs, stands and bathing aids - to design compliant products and develop test plans.
- Testing laboratories and certification bodies - to perform standardized safety and durability tests.
- Retailers and compliance officers - to verify that products meet European safety expectations.
- Regulators and market surveillance authorities - for assessing product conformity and consumer safety. Using this standard helps reduce risks such as entrapment, choking, suffocation, structural failure and chemical exposure.
Related Standards (if applicable)
- EN 17022 - Standalone bathing aids
- EN 71-3 - Safety of toys - Migration of certain elements (referenced for chemical limits)
- EN ISO 291 - Conditioning and testing atmospheres
- ISO 7619-1 - Hardness (Shore) testing for materials
Keywords: EN 17072:2018, child care articles, bath tubs, stands, non-standalone bathing aids, safety requirements, test methods, CEN, product testing, entrapment, choking, stability.
Frequently Asked Questions
SIST EN 17072:2019 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods". This standard covers: This document specifies safety requirements and test methods for children’s bath tubs and stands and for non-standalone bathing aids that are designed and intended to be used only in conjunction with a children’s bath tub. This document does not cover children’s bath tubs and stands and non-standalone bathing aids designed for children with special needs. NOTE 1 Standalone bathing aids are covered in EN 17022. NOTE 2 Where the product has several functions or can be converted into another function it is due to comply with relevant standard(s).
This document specifies safety requirements and test methods for children’s bath tubs and stands and for non-standalone bathing aids that are designed and intended to be used only in conjunction with a children’s bath tub. This document does not cover children’s bath tubs and stands and non-standalone bathing aids designed for children with special needs. NOTE 1 Standalone bathing aids are covered in EN 17022. NOTE 2 Where the product has several functions or can be converted into another function it is due to comply with relevant standard(s).
SIST EN 17072:2019 is classified under the following ICS (International Classification for Standards) categories: 97.190 - Equipment for children. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 17072:2019 is associated with the following European legislation: EU Directives/Regulations: 2001/95/EC; Standardization Mandates: M/464. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 17072:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Artikel für Säuglinge und Kleinkinder - Badewannen und Gestelle - Sicherheitsanforderungen und PrüfverfahrenArticles de puériculture - Baignoires et supports - Exigences de sécurité et méthodes d'essaiChild care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods97.190Otroška opremaEquipment for childrenICS:Ta slovenski standard je istoveten z:EN 17072:2018SIST EN 17072:2019en,fr,de01-april-2019SIST EN 17072:2019SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 17072
December
t r s z ICS
{ yä s { r English Version
Child care articles æ Bath tubsá stands and nonæstandalone bathing aids æ Safety requirements and test methods Articles de puériculture æ Baignoiresá supports et aides au bain non indépendantes æ Exigences de sécurité et méthodes d 5essai
Artikel für Säuglinge und Kleinkinder æ Badewannená Gestelle und nicht freistehende Badehilfen æ Sicherheitsanforderungen und Prüfverfahren This European Standard was approved by CEN on
s { October
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s y r y tã t r s z ESIST EN 17072:2019
Rationales . 36 A.1 General . 36 A.2 Chemical hazards (see Clause 6) . 36 A.3 Mechanical hazards (see Clause 7) . 36 A.3.1 General . 36 A.3.2 Entrapment hazards . 36 A.3.3 Hazards due to moving parts . 36 A.3.4 Entanglement hazards . 37 A.3.5 Choking and ingestion hazards . 37 A.3.6 Suffocation hazards. 37 A.3.7 Hazardous edges, corners and protruding parts . 37 A.3.8 Hazards from inadequate structural integrity . 37 A.3.9 Hazards due to folding or adjusting of the product . 37 A.3.10 Plastic decals . 38 A.3.11 Hazards due to inadequate stability . 38 A.4 Drowning hazard . 38 A.5 Thermal hazards . 38 Annex B (normative)
Warnings . 39 Bibliography . 46 SIST EN 17072:2019
Key A non-standalone bathing aid B child’s bath tub Figure 1 — Example of non-standalone bathing aids 3.3.1 non-standalone bath cradle non standalone bathing aid designed to keep a child in a reclined position during bathing Note 1 to entry: These products are intended for use from birth and until the child is able to sit upright unassisted. 3.3.2 non-standalone bath seat non-standalone bathing aid designed to keep a child in a seated position during bathing Note 1 to entry: These products are intended for use with a child who is able to sit upright unassisted and until the child begins pulling up to a standing position. 3.4 integrated bath cradle non-removable part of a children’s bath tub designed to keep a child in a reclined position during bathing. See Figure 2. Note 1 to entry: These products are intended for use from birth and until the child is able to sit upright unassisted. SIST EN 17072:2019
Figure 2 — Example of integrated bath cradle 4 Test equipment 4.1 Test probes for finger entrapment 4.1.1 Test probes with hemispherical end Probes made from plastic or other hard, smooth material of diameters ()−0017, mm and ()+01012, mm with a full hemispherical end that can be mounted on a force-measuring device, see Figure 3. Mesh probe made from plastic or other hard, smooth material as shown in Figure 4. Dimensions in millimetres
Key Probe type 7 mm probe 12 mm probe Diameter A 0-017, +01012, Radius RB half of diameter A half of diameter A 1 Line scribed around circumference showing depth of penetration Figure 3 — Test probes with hemispherical end SIST EN 17072:2019
Key Probe type mesh probe Diameter A −0017, Diameter B −00156,, Radius RB half of diameter B Figure 4 — Test probe for mesh 4.1.2 Shape assessment probe Probe made from plastics or other hard, smooth material with the dimensions shown in Figure 5. Dimensions in millimetres
Key A front view B top view C side view D 3D view Figure 5 — Shape assessment probe 4.2 Test probes for head entrapment 4.2.1 Small head probe Probe made of hard and smooth material with dimensions as shown in Figure 6. SIST EN 17072:2019
Key 1 handle Figure 6 — Small head probe 4.2.2 Large head probe Probe made of hard and smooth material with dimensions as shown in Figure 7. Dimensions in millimetres
Key 1 handle Figure 7 — Large head probe 4.2.3 Template for partially bound and V shaped openings Probe made of hard and smooth material with dimensions as shown in Figure 8. SIST EN 17072:2019
a) b) Key 1 B portion 2 A portion a) front view b) side view Figure 8 — Template for partially bound and V shaped openings 4.3 Test mass A A rigid cylinder (160 ± 5) mm in diameter and (300 ± 5) mm in height, having a mass of 9 kg and with its centre of gravity in the centre of the cylinder. All edges shall have a radius of (5 ± 1) mm. Two anchorage points shall be provided. These shall be positioned (150 ± 2,5) mm from the base and at 180° to each other around the circumference (see Figure 9). SIST EN 17072:2019
Key 1 radius: (5 ± 1) mm 2 two anchorage points Figure 9 — Test mass A 4.4 Small parts cylinder Small parts cylinder for the assessment of small components, having dimensions in accordance with Figure 10. SIST EN 17072:2019
Figure 10 — Small parts cylinder 4.5 Feeler gauge Gauge with a thickness of (0,4 ± 0,02) mm and an insertion edge radius of (3 ± 0,5) mm (Figure 11). Dimensions in millimetres
Figure 11 — Feeler gauge 4.6 Test glass surface A rigid plane covered with uncoated tempered float glass that has a smooth surface and thickness of 6 mm. 4.7 Test surface for drop test and impact test A 2 mm thick rubber mat, with hardness (75 ± 10) Shore A according to ISO 7619-1, and which is placed on a horizontal concrete surface. 4.8 Tube Tube with an inner diameter of 60 mm. SIST EN 17072:2019
Key 1 inside 2 outside 3 bath mounted support 4 bath test base Figure 12 — Test base for bath mounted supports The profiles shall be fixed parallel to the distance equal to the minimum bath dimension recommended by the manufacturer of the bath mounted supports. 5 General requirements 5.1 Product conditioning Products containing vulcanized rubber and thermoplastic elastomer parts (but not silicone parts) shall be artificially aged for seven days in an aerated drying cabinet at a temperature of (70 ± 2) °C. All products shall be conditioned for at least 24 h, in a standard atmosphere (as specified in EN ISO 291) at a temperature of (23 ± 2) °C and relative humidity of (50 ± 5) %. SIST EN 17072:2019
mg/kg Aluminium
70 000 Antimony
560 Arsenic
47 Barium
18 750 Boron
15 000 Cadmium
17 Chromium (III)
460 SIST EN 17072:2019
0,2 Cobalt
130 Copper
7 700 Lead
23 Manganese
15 000 Mercury
94 Nickel
930 Selenium
460 Strontium
56 000 Tin
180 000 Organic tin
12 Zinc
46 000 When testing is performed the method specified in EN 71-3 shall be used. A separate sample may be used for these tests. 7 Mechanical hazards (see A.3) 7.1 General No harness shall be provided as a child restraint system. 7.2 Entrapment hazards 7.2.1 Entrapment of fingers 7.2.1.1 Requirement There shall be no accessible completely bounded openings in rigid materials, in the inner and upper surface that supports the child and on the exterior side of the bath tub up to 100 mm from the bath tub rim, between 7 mm and 12 mm unless the depth is less than 10 mm or unless the shape assessment probe, see 4.1.2, enters, when tested in accordance with 7.2.1.2. There shall be no accessible openings in mesh, in the inner and upper surface that supports the child and on the exterior side of the bath tub up to 100 mm from the bath tub rim, that allow the test probe for mesh, 4.1.1, to penetrate up to the 7 mm diameter section, when tested in accordance with 7.2.1.2. The test shall be carried out with the product in any intended position of use without any test mass and with test mass A (see 4.3). 7.2.1.2 Test method Check whether the 7 mm probe, 4.1.1, with an applied force of up to 30 N, enters 10 mm or more into any accessible completely bounded opening in any possible orientation. If the 7 mm probe enters 10 mm or more, then the 12 mm probe, 4.1.1, shall also enter 10 mm or more with an applied force of up to 5 N. If the 7 mm probe enters with an applied force of up to 30 N but the 12 mm probe does not enter 10 mm or more with an applied force of up to 5 N, check whether the 12 mm shape assessment probe (see 4.1.2) enters with an applied force of up to 5 N. Check whether the test probe for mesh, 4.1.1, with an applied force of up to 30 N, penetrates accessible openings in mesh up to the 7 mm diameter section. SIST EN 17072:2019
Key 1 PASS 2 PASS 3 continue with the test 4 continue with the test Figure 13 — Method of insertion of portion B
Key 1 PASS 2 continue with the test Figure 14 — Method of insertion of portion B SIST EN 17072:2019
Key 1 PASS 2 FAIL Figure 15 — Method of insertion of portion A 7.3 Hazards due to moving parts 7.3.1 Requirements for compression points After the product has been set up for use in accordance with the manufacturer’s instructions, there shall be no accessible compression points, in the inner and upper surface that supports the child and on the exterior side of the bath tub up to 100 mm from the bath tub rim, which can close to less than 12 mm unless they are always less than 5 mm, as the result of: a) the movement of the product; or b) the movement of body weight by the child using the product; or c) the application of an external force (either unintentionally by the carer, or by a powered mechanism). Movement due to elasticity of materials shall not be considered as compression hazard. SIST EN 17072:2019
Key D distance between attachment points L length of cords, ribbons and parts used as ties Figure 16 — Examples of measuring cords, ribbons or similar parts 7.4.2 Test method The length of a cord, ribbon or similar part is measured from the fixing point on the product to the free end of the cord, ribbon or similar part while a 25 N tensile force is applied. The peripheral dimension of a loop shall be measured while a 25 N tensile force is applied. 7.5 Choking and ingestion hazards 7.5.1 Requirements Any component or filling material, in the inner and upper surface that supports the child and on the exterior side of the bath tub up to 100 mm from the bath tub rim, that is considered able to be gripped by a child in accordance with 7.5.2.1 shall be tested in accordance with 7.5.2.2 and 7.5.2.3. Any component or part of a component or filling material that is removed shall not fit wholly in any orientation, without compressing or manipulating it, within the small parts cylinder specified in 4.4. Foam pads with a thickness lower than 2 mm are excluded from these requirements. 7.5.2 Test methods 7.5.2.1 Assessment of child’s ability to grip components A component is considered to be able to be gripped if the child can grip the component between its thumb and forefinger or between its teeth. SIST EN 17072:2019
...
SIST EN 17072:2019は、子供用バスタブ、スタンド、および非独立型の入浴補助具に関する安全要件と試験方法を定めた重要な標準です。この文書は、子供専用のバスタブとそのスタンド、非独立型入浴補助具の使用に際して必要となる安全基準を明確にし、消費者が安心して利用できる製品の提供を目指しています。 この標準の範囲は、基本的には子供用バスタブとその関連製品に限られており、特別なニーズを持つ子供向けのバスタブや補助具は含まれていません。これにより、特定の利用者層に対して適合した基準を策定することが可能となり、より安全な製品開発を促進しています。また、製品が複数の機能を持つ場合や異なる機能に変換可能な場合には、関連する標準に従う必要があることを明記しています。 強みとしては、SIST EN 17072:2019は、特に子供の安全を重視している点にあります。親や保護者が子供を入浴させる際のリスクを軽減するために、厳格な安全要件が設けられており、そこには試験方法も含まれています。これにより、製品の市場投入前に十分な検証を行うことができ、消費者の信頼を得ることが期待されます。 この標準の関連性は、今日の市場においてますます重要視されています。消費者の意識が高まり、子供向け商品に対する安全性の要求が強まっている中で、SIST EN 17072:2019は製造業者にとって価値のある指針となっており、業界全体の基準向上に寄与しています。
Die Norm SIST EN 17072:2019 behandelt die Sicherheitsanforderungen und Prüfmethoden für Kinderbadewannen, Ständer und nicht autonome Badehilfen, die ausschließlich in Verbindung mit einer Kinderbadewanne verwendet werden dürfen. Der Umfang dieser Norm ist klar definiert und konzentriert sich auf Produkte, die speziell für die Nutzung durch Kleinkinder konzipiert sind. Eine der Stärken dieser Norm liegt in ihrer detaillierten Festlegung von Sicherheitsanforderungen, die sicherstellen, dass die Produkte sicher und zuverlässig sind. Diese Anforderung ist besonders wichtig, um Unfälle und Verletzungen beim Baden von Kleinkindern zu vermeiden. Die Norm bietet klare Testmethoden, die eine objektive Bewertung der Sicherheit ermöglichen, was sowohl für Hersteller als auch für Verbraucher von großem Nutzen ist. Zudem wird in der Norm ausdrücklich darauf hingewiesen, dass Produkte, die für Kinder mit besonderen Bedürfnissen konzipiert sind, nicht von diesem Dokument abgedeckt sind. Dies gewährleistet, dass die spezifischen Anforderungen für diese Produkte in separaten Normen berücksichtigt werden, was zu einer höheren Präzision und Relevanz der Sicherheitsanforderungen führt. Die Relevanz der SIST EN 17072:2019 ist unbestritten, da Sicherheit im Umgang mit Kinderprodukten oberste Priorität hat. Die Norm unterstützt Hersteller dabei, sichere Produkte zu entwickeln und den Verbrauchern eine informierte Entscheidungsfindung zu ermöglichen. Insgesamt stellt die Norm einen wichtigen Schritt in Richtung erhöhte Sicherheit und Qualität im Bereich der Kinderbadewannen und Badehilfen dar.
The SIST EN 17072:2019 standard addresses the crucial aspect of safety in child care articles, specifically focusing on bath tubs, stands, and non-standalone bathing aids. This document sets forth comprehensive safety requirements and test methods, ensuring that these products are safe for use with children. The scope of the standard is clearly defined, as it applies specifically to children’s bath tubs and related products designed for use in conjunction with a bath tub, thereby establishing a targeted approach to safety in this category. One of the strengths of SIST EN 17072:2019 is its emphasis on safety, providing a structured framework that manufacturers can follow to enhance product reliability. This focus on safety requirements is vital, as it helps to mitigate potential risks that could arise from the use of these bathing products. Furthermore, the inclusion of test methods within the standard allows for consistent evaluation and validation of compliance, ensuring that all products meet the necessary safety benchmarks before reaching consumers. The relevance of this standard cannot be understated in today's market, where consumer awareness regarding child safety is at an all-time high. By adhering to the stipulations outlined in SIST EN 17072:2019, manufacturers can effectively demonstrate their commitment to producing safe and reliable child care articles. Additionally, the exclusion of products designed for children with special needs indicates a specialized approach, allowing for dedicated standards to address the unique requirements of this demographic-showcasing the standard's adaptability and focus on specific consumer needs. Overall, SIST EN 17072:2019 serves as a critical document in guiding manufacturers towards ensuring the safety of child care articles, thereby fostering trust among consumers and promoting high standards in product design and testing.
SIST EN 17072:2019 표준은 어린이 욕조, 스탠드 및 비독립형 목욕 보조기구에 대한 안전 요구 사항 및 시험 방법을 명시하고 있습니다. 이 표준의 주요 범위는 어린이 욕조와 스탠드 및 이들과 함께 사용하기 위해 설계된 비독립형 목욕 보조기구에 초점을 맞추고 있습니다. 특히 이 표준은 어린이의 안전을 최우선으로 고려하여 개발되었으며, 제품의 사용과 관련된 다양한 위험 요소들을 사전에 예방할 수 있도록 도와줍니다. SIST EN 17072:2019의 강점 중 하나는 명확한 안전 요구 사항과 시험 방법을 제공하여 제조업체들이 제품을 시장에 출시하기 전 안전성을 검증할 수 있도록 하는 것입니다. 이러한 강력한 안전 기준은 소비자가 어린이용 욕조 및 목욕 보조기구를 구매할 때 신뢰할 수 있는 정보를 제공하며, 이로 인해 소비자 만족도를 높이는 데 기여합니다. 또한, 이 표준은 변환 가능한 기능이나 여러 기능을 가진 제품에 대해서도 관련 기준을 준수해야 한다고 명시함으로써 복합적인 제품 설계에 대한 유연성을 제공합니다. 그러나 이 문서는 특별한 필요를 가진 어린이를 위한 욕조 및 스탠드, 비독립형 목욕 보조기구는 포함하지 않으므로, 이러한 제품을 사용하는 소비자들은 별도의 지침이 필요할 수 있습니다. 이는 특정 사용자의 요구에 맞춘 안전 기준이 필요함을 암시하며, 제조업체들이 이 요구를 충족해야 함을 강조합니다. 결론적으로, SIST EN 17072:2019 표준은 어린이 욕조 및 비독립형 목욕 보조기구의 안전성을 확보하기 위한 필수적인 기준을 제공하며, 제조업체와 소비자 모두에게 실질적인 안전 검증 도구로서의 기능을 합니다. 이러한 표준의 적용은 어린이 제품의 안전성을 더욱 높이고, 시장에서의 경쟁력을 강화하는 데 기여할 것입니다.
La norme SIST EN 17072:2019 se concentre sur les articles de soin pour enfants, en particulier les baignoires pour enfants, les supports et les aides au bain non autonomes. Son champ d'application est clairement défini, se limitant aux exigences de sécurité et aux méthodes d'essai pour ces produits spécifiques. Cela en fait un document essentiel pour assurer la sécurité des jeunes enfants lors de leur bain, en garantissant que les produits utilisés sont conformes aux normes de sécurité. Parmi les points forts de cette norme, on peut noter la précision de ses exigences qui permettent de garantir une protection optimale. Les méthodes d'essai énoncées dans le document sont également un atout, car elles fournissent des lignes directrices claires pour évaluer la conformité des produits. En intégrant des mesures de sécurité adaptées, la norme répond aux préoccupations croissantes des parents concernant la sécurité de leurs enfants dans des situations potentiellement dangereuses. De plus, la pertinence de cette norme se manifeste à travers sa focalisation sur les baignoires et aides au bain qui apaisent les craintes des utilisateurs finaux. Elle est un outil crucial pour les fabricants, leur permettant de s'assurer que leurs produits respectent les standards en vigueur and garantissant ainsi leur sécurité avant la mise sur le marché. Il est également important de noter que la norme exclut spécifiquement les baignoires et aides au bain destinées aux enfants ayant des besoins spécifiques, ce qui prépare le terrain pour des normes distinctes adaptées à ce segment de marché. En somme, la SIST EN 17072:2019 représente un cadre robuste pour l'évaluation et l'assurance qualité des articles de bain pour enfants, renforçant la confiance des consommateurs dans les produits disponibles sur le marché.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...