SIST EN 50289-4-7:2008

Communication cables - Specifications for test methods -- Part 4-7: Environmental test methods - Damp heat, steady state

This Part 4-5 of EN 50289 details the method of test to determine the stability of transmission performance of a finished cable used in analogue and digital communication systems when submitted to damp heat steady state which may occur during use. It is to be read in conjunction with Part 4-1 of EN 50289, which contains essential provisions for its application.

Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 4-7: Umweltprüfverfahren - Feuchte Wärme, konstant

Dieser Teil 4-7 der EN 50289 beschreibt das Prüfverfahren zur Bestimmung des Stabilitätsverhaltens der Übertragungseigenschaft von Kabeln für analoge und digitale Kommunikationssysteme, die der feuchten Wärme, konstant, unterworfen sind, wie sie während dem Betrieb auftritt. Er ist zusammen mit Teil 4-1 der EN 50289 anzuwenden, wo grundlegende Festlegungen zur Anwendung dieser Norm getroffen sind.

Câbles de communication - Spécifications des méthodes d'essais - Partie 4-7: Méthodes d'essais d’environnement - Chaleur humide, essai continu

Komunikacijski kabli - Specifikacije za preskusne metode - 4-7. del: Metode za preskušanje vplivov okolja - Vlažna vročina, ustaljeno stanje

General Information

• Status: Published
• Publication Date: 02-Mar-2008
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Feb-2008
• Due Date: 20-Apr-2008
• Completion Date: 03-Mar-2008
• Mandate: M/212 - ICT - metallic and optical cables and cabling systems
• Ref Project: EN 50289-4-7:2008 - Communication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady state

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Communication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady stateCâbles de communication - Spécifications des méthodes d'essais - Partie 4-7: Méthodes d'essais d’environnement - Chaleur humide, essai continuKommunikationskabel - Spezifikationen für Prüfverfahren - Teil 4-7: Umweltprüfverfahren - Feuchte Wärme, konstantTa slovenski standard je istoveten z:EN 50289-4-7:2008SIST EN 50289-4-7:2008en,de33.120.10ICS:SLOVENSKI
STANDARDSIST EN 50289-4-7:200801-april-2008







EUROPEAN STANDARD EN 50289-4-7 NORME EUROPÉENNE
EUROPÄISCHE NORM January 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50289-4-7:2008 E
ICS 33.120.10
English version
Communication cables -
Specifications for test methods -
Part 4-7: Environmental test methods -
Damp heat, steady state
Câbles de communication -
Spécifications des méthodes d'essais -
Partie 4-7: Méthodes d'essais d’environnement -
Chaleur humide, essai continu
Kommunikationskabel -
Spezifikationen für Prüfverfahren -
Teil 4-7: Umweltprüfverfahren -
Feuchte Wärme, konstant
This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 50289-4-7:2008 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 46X, Communication cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50289-4-7 on 2007-09-01. The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2008-09-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2010-09-01 This European Standard has been prepared under the European Mandate M/212 given to CENELEC by the European Commission and the European Free Trade Association. __________



- 3 - EN 50289-4-7:2008 Contents 1 Scope.4 2 Normative references.4 3 Definitions.4 4 Test methods.4 4.1 Equipment.4 4.2 Test sample.4 4.3 Procedure.5 4.4 Requirements.6 4.5 Details to be specified.6 5 Test report.6



EN 50289-4-7:2008 - 4 -
1 Scope This Part 4-7 of EN 50289 details the method of test to determine the stability of transmission performance of a finished cable used in analogue and digital communication systems when submitted to damp heat steady state which may oc
...