SIST EN 13687-1:2002
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion
This European Standard is the first of five parts to assess the thermal compatibility of repair products and systems, including grouts, mortars and concretes and surface protection systems, used for the repair and protection of concrete structures. The method measures the effect of freeze-thaw thermal shock cycling with immersion in saturated de-icing salt solution. The method is suitable for repair products and systems based on CC, PCC and PC binders and for surface protection systems.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Temperaturwechselveräglichkeit - Teil 1: Frost-Tau-Wechselbeanspruchung mit Tausalzangriff
Diese Europäische Norm ist der erste Teil einer Reihe von fünf Normen zur Bewertung der Temperaturwechselverträglichkeit von Instandsetzungsprodukten und -systemen, einschließlich Feinmörteln, Mörteln und Betonen sowie Oberflächenschutzsystemen, die zur Instandsetzung und zum Schutz von Betontragwerken verwendet werden. Mit dem in diesem Teil festgelegten Verfahren wird die Auswirkung von schockartiger Frost-Tau-Wechselbeanspruchung mit Tausalzangriff gemessen. Das Verfahren ist auf Instandsetzungsprodukte und -systeme, die auf CC-, PCC- und PC-Bindemitteln beruhen, sowie auf Oberflächenschutzsysteme anwendbar.
Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la compatibilité thermique - Partie 1: Cycles de gel-dégel avec immersion dans des sels de déverglaçage
La présente Norme européenne est la premiere partie d'une norme en cinq parties destinée a évaluer la compatibilité thermique des produits et des systemes de réparation, comprenant les coulis, mortiers et bétons, et des systemes de protection de surface utilisés pour la réparation et la protection des structures en béton. La méthode spécifiée dans la présente partie permet de mesurer l'effet des cycles de choc thermique gel-dégel, avec immersion dans une solution saturée de sels de déverglaçage. La méthode convient pour les produits et systemes de réparation a base de liants CC, PCC et PC et pour les systemes de protection de surface.
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje toplotne združljivosti - 1. del: Ciklično zamrzovanje in tajanje s potapljanjem v raztopino soli za tajanje
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Temperaturwechselveräglichkeit - Teil 1: Frost-Tau-Wechselbeanspruchung mit TausalzangriffProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la compatibilité thermique - Partie 1: Cycles de gel-dégel avec immersion dans des sels de déverglaçageProducts and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13687-1:2002SIST EN 13687-1:2002en01-september-2002SIST EN 13687-1:2002SLOVENSKI
STANDARD
SIST EN 13687-1:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13687-1February 2002ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of thermalcompatibility - Part 1: Freeze-thaw cycling with de-icing saltimmersionProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Détermination dela compatibilité thermique - Partie 1: Cycles de gel-dégelavec immersion dans des sels déglaçantsProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der Temperaturwechselveräglichkeit - Teil 1:Frost-Tau-Wechselbeanspruchung mit TausalzangriffThis European Standard was approved by CEN on 23 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13687-1:2002 ESIST EN 13687-1:2002
EN 13678-1:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Test principle.45Apparatus.46Preparation of test specimens.57Test procedure.58Evaluation of results.69Test report.7Annex A (normative)
Summary of temperatures and humidities for the curing, conditioning andtesting of repair products and systems.8SIST EN 13687-1:2002
EN 13687-1:2002 (E)3ForewordThis document EN 13687-1:2002 has been prepared by Technical Committee CEN/TC 104 "Concrete and relatedproducts", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by August 2002, and conflicting national standards shall be withdrawn at the latest byDecember 2002.It has been prepared by sub-committee 8 "Products and systems for the protection and repair of concretestructures", the secretariat of which is held by AFNOR.This Part of this European Standard describes a method of test for determining the thermal compatibility of grouts,mortars and concretes and surface protection systems applied to a standard concrete, by shock cycling between21 °C and –15 °C, including immersion in saturated de-icing salt solution. It is one of a series of inter-related partsdealing with the thermal compatibility of repair products and systems. The other parts of this standard are :EN 13687-2, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock).EN 13687-3, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact.EN 13687-4, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 4: Dry thermal cycling.EN 13687-5, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 5: Resistance to temperature shock.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13687-1:2002
EN 13678-1:2002 (E)41 ScopeThis European Standard is the first of five parts to assess the thermal compatibility of repair products and systems,including grouts, mortars and concretes and surface protection systems, used for the repair and protection ofconcrete structures. The method specified in this Part measures the effect of freeze-thaw thermal shock cyclingwith immersion in saturated de-icing salt solution. The method is suitable for repair products and systems based onCC, PCC and PC binders and for surface protection systems.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 196-1, Methods of testing cement – Part 1: Determination of strength.EN 1504-1, Products and systems for the protection and repair of concrete structures - Definitions, requirements,quality control and evaluation of conformity - Part 1: Definitions.prEN 1504-2, Products and systems for the protection and repair of concrete structures - Definitions, requirements,quality control and evaluation of conformity - Part 2: Surface protection systems.prEN 1504-3, Products and sys
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.