Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977)

Specifies a method for the determination of the apparent density of a moulding powder or a granular material. The sample is pured through a specified funnel into a measuring cylinder of 100 cubiccentimeter capacity, the excess is removed with a straightedge and the mass of the contents is determinded by weighing. Expression of the apparent density in grams per millilitre.

Kunststoffe - Bestimmung der scheinbaren Dichte von Formmassen, die durch einen genormten Trichter abfließen können (Schüttdichte) (ISO 60:1977)

Die vorliegende Internationale Norm legt ein Verfahren zur Bestimmung der Schüttdichte, d.h. der Masse pro Volumeneinheit von Formmassen aus Pulvern oder Körnern, die durch einen gegebenen Trichter abfließen können, fest.

Plastiques - Détermination de la masse volumique apparente des matieres susceptibles de s'écouler a travers un entonnoir donné (ISO 60:1977)

La présente Norme internationale spécifie une méthode de détermination de la masse volumique apparente, c'est-à-dire la masse par unité de volume, des matières en poudre ou en granulés, susceptibles de s'écouler à travers un entonnoir d'un modèle déterminé.  
NOTE - Pour une méthode de détermination de la masse volumIque apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné, voir ISO 61.  Lorsque cette méthode est appliquée à des matières composées de grains relativement gros, des résultats variables peuvent être obtenus, dus à l'erreur introduite lorsque le sommet du cylindre est arasé avec une lame à bord rectiligne.  La connaissance de la masse volumique apparente ne peut servir à comparer l'expansion ou le foisonnement de matières à mouler que si leur densité à l'état moulé est approximativement la même.

Polimerni materiali - Določanje nasipne mase materiala, ki se lahko nasipa skozi lij določenih mer (ISO 60:1977)

General Information

Status
Published
Publication Date
30-Apr-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2000
Due Date
01-May-2000
Completion Date
01-May-2000

Relations

Buy Standard

Standard
SIST EN ISO 60:2000
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 60:2000
01-maj-2000

3ROLPHUQLPDWHULDOL'RORþDQMHQDVLSQHPDVHPDWHULDODNLVHODKNRQDVLSDVNR]LOLM

GRORþHQLKPHU ,62

Plastics - Determination of apparent density of material that can be poured from a

specified funnel (ISO 60:1977)
Kunststoffe - Bestimmung der scheinbaren Dichte von Formmassen, die durch einen
genormten Trichter abfließen können (Schüttdichte) (ISO 60:1977)

Plastiques - Détermination de la masse volumique apparente des matieres susceptibles

de s'écouler a travers un entonnoir donné (ISO 60:1977)
Ta slovenski standard je istoveten z: EN ISO 60:1999
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 60:2000 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 60:2000
---------------------- Page: 2 ----------------------
SIST EN ISO 60:2000
---------------------- Page: 3 ----------------------
SIST EN ISO 60:2000
---------------------- Page: 4 ----------------------
SIST EN ISO 60:2000

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOAHAR OPl-AHM3AUMfl l-Io CTAHAAPTM3AUM~.ORGANISATION INTERNATIONALE DE NORMALISATION

Determination of apparent density of material that
Plastics -
tan be poured from a specified funnel

Plastiques - Determination de la masse volumique apparente des matEres susceptibles de s ’ecouler a travers un

en tonnoir donnk
Second edition - 1977-08-01
UDC 678.033 : 531.755 Ref. No. ISO 60-1977 (E)

Descriptors : plastics, moulding materials, tests,s physical tests,, density measurement, bulk density .

Price based-on 2 pages
---------------------- Page: 5 ----------------------
SIST EN ISO 60:2000
ßOREWORD

ISO (the International Organization for Standardization) is a worldwide federation

of national Standards institutes (EO member bodies). The work of developing
International Standards is carried out through SS0 technical committees. Every
member body interested in a subject for which a technical committee has been set

up has the right to be represented on that committee. lnternational organizations,

governmental and non-governmental, in liaison with ISO, also take part in the work.

Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
ISO 60 was developed by Technical Committee
International Standard
ISO/TC 6 1, Plastics.
This second edition was submitted directly to the ISO Council, in accordance
with clause 6.12.1 of the Directives for the technical work of ISO. lt cancels

and replaces the first edition (i.e. ISO 60- ‘l976), which had been approved by the

member bodies of the following countries :
Australia India Portugal
Austria I reland South Africa, Rep. of
Belgium Israel Spain
Chile I taly Sweden
Czechoslovakia Japan Turkey
Denmark Mexico United Kingdom
Finland Netherlands U.S.A.
France New Zealand U.S.S. R.
Germany Pakistan Yugoslavia
G reece
Poland
No member body had expressed disapproval of the document.
0 International Organkation for Standardkation, 1977 l
Printed in Switzerlan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.