SIST EN ISO 2811-3:2024
(Main)Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)
ISO 2811-3:2011 specifies a method for determining the density of paints, varnishes and related products using an oscillator.
The method is suitable for all materials, including paste-like coatings. If a pressure-resistant type of apparatus is used, the method is also applicable to aerosols.
Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO 2811-3:2023)
Dieses Dokument legt ein Verfahren zum Bestimmen der Dichte von Beschichtungsstoffen und ähnlichen Pro
dukten mit einem Schwingungs-Dichtemesser fest.
Das Verfahren ist für alle Beschichtungsstoffe einschließlich pastenförmiger anwendbar. Wenn eine druckfeste Ausführung des Gerätes verwendet wird, ist das Verfahren auch für Aerosole anwendbar.
Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par oscillation (ISO 2811-3:2023)
L'ISO 2811-3:2011 spécifie une méthode de détermination de la masse volumique des peintures, vernis et produits assimilés au moyen d'un oscillateur.
La méthode convient pour tous les produits, y compris les revêtements de consistance pâteuse. Si un type d'appareillage résistant à la pression est utilisé, la méthode est également applicable aux aérosols.
Barve in laki - Določanje gostote - 3. del: Oscilacijska metoda (ISO 2811-3:2023)
Standard ISO 2811-3:2011 določa metodo za določanje gostote barv, lakov in sorodnih izdelkov z uporabo oscilatorja.
Metoda je ustrezna za vse materiale, vključno s premazi, podobnimi pasti. V primeru uporabe tlačno odpornega aparata se metoda uporablja tudi za aerosole.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 2811-3:2024
01-januar-2024
Nadomešča:
SIST EN ISO 2811-3:2011
Barve in laki - Določanje gostote - 3. del: Oscilacijska metoda (ISO 2811-3:2023)
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-
3:2023)
Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO 2811
-3:2023)
Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par
oscillation (ISO 2811-3:2023)
Ta slovenski standard je istoveten z: EN ISO 2811-3:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2811-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 2811-3:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 2811-3:2024
EN ISO 2811-3
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2811-3:2011
English Version
Paints and varnishes - Determination of density - Part 3:
Oscillation method (ISO 2811-3:2023)
Peintures et vernis - Détermination de la masse Beschichtungsstoffe - Bestimmung der Dichte - Teil 3:
volumique - Partie 3: Méthode par oscillation (ISO Schwingungsverfahren (ISO 2811-3:2023)
2811-3:2023)
This European Standard was approved by CEN on 2 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2811-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 2811-3:2024
EN ISO 2811-3:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 2811-3:2024
EN ISO 2811-3:2023 (E)
European foreword
This document (EN ISO 2811-3:2023) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2811-3:2011.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 2811-3:2023 has been approved by CEN as EN ISO 2811-3:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 2811-3:2024
---------------------- Page: 6 ----------------------
SIST EN ISO 2811-3:2024
INTERNATIONAL ISO
STAND
...
SLOVENSKI STANDARD
oSIST prEN ISO 2811-3:2023
01-maj-2023
Barve in laki - Določanje gostote - 3. del: Oscilacijska metoda (ISO/DIS 2811-
3:2023)
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO/DIS
2811-3:2023)
Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO/DIS
2811-3:2023)
Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par
oscillation (ISO/DIS 2811-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 2811-3
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 2811-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 2811-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 2811-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2811-3
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-03-09 2023-06-01
Paints and varnishes — Determination of density —
Part 3:
Oscillation method
Peintures et vernis — Détermination de la masse volumique —
Partie 3: Méthode par oscillation
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 2811-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 2811-3:2023
ISO/DIS 2811-3:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2811-3
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
Paints and varnishes — Determination of density —
Part 3:
Oscillation method
Peintures et vernis — Détermination de la masse volumique —
Partie 3: Méthode par oscillation
ICS: 87.040
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 2811-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 2811-3:2023
ISO/DIS 2811-3:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.