iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 280.3 S1:1999

(Main)

Safety requirements for electric fans and regulators -- Part 3: Jet fans

Safety requirements for electric fans and regulators -- Part 3: Jet fans

Safety of Household and Similar Electrical Appliances, Part 1 : General Requirements, is applicable except as follows: 1.1 Replacement: This standard applies to jet fans commonly known as air circulators and air blast cooling fans oscillating and non-oscillating and their associated regulators intended for use on single phase a.c. circuits and d.c. circuits not exceeding 250 V ; air blast cooling fans may be intended for use on three phase a.c. system up to 440 V. Wherever applicable, the term "fan" used in this standard includes its associated regulators, if any. Provisions of this standard may also be adapted to the extent applicable to fans not intended for normal household use, which nevertheless may be a source of danger to the public. Additional requirements may also be necessary for fans intended to be used in: i) vehicles, and ii) tropical countries. Attention is drawn to the fact that in many countries additional requirements may be specified by the national health authorities and the national authorities responsible for protection of labour. This standard does not apply to safety requirements for jet fans intended to be used in locations where special conditions prevail, such as the presence of corrosive or explosive atmosphere. 1.2 Addition: Jet fans and does not cover performance. This standard is concerned with safety requirements of jet fans and requirements and corresponding tests which are covered in IEC Publication 535: Regulators.

Sicherheitsanforderungen für Ventilatoren und zugehörige Steuereinheiten -- Teil 3: Strahlventilatoren

Règles de sécurité pour les ventilateurs électriques et leurs régulateurs de vitesse -- Partie 3: Ventilateurs de jet

Safety requirements for electric fans and regulators - Part 3: Jet fans (IEC 60342-3:1982)

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
31-Mar-2000
ICS
23.120 - Ventilators. Fans. Air-conditioners
Technical Committee
ETC - Electrotechnical technical committe
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Apr-2000
Due Date
01-Apr-2000
Completion Date
01-Apr-2000
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
HD 280.3 S1:1990 - Safety requirements for electric fans and regulators - Part 3: Jet fans

Relations

Replaced By
SIST EN 60335-2-80:1998 - Safety of household and similar electrical appliances -- Part 2-80: Particular requirements for fans
Effective Date
29-Jan-2023
Replaced By
SIST EN 60335-2-80:1998 - Safety of household and similar electrical appliances -- Part 2-80: Particular requirements for fans
Effective Date
07-Jun-2022

Buy Standard

HD 280.3 S1:1999HD 280.3 S1:1999
PreviousNext
Standardization document
HD 280.3 S1:1999
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 280.3 S1:1999
01-julij-1999
Safety requirements for electric fans and regulators - Part 3: Jet fans (IEC 60342-
3:1982)
Safety requirements for electric fans and regulators -- Part 3: Jet fans
Sicherheitsanforderungen für Ventilatoren und zugehörige Steuereinheiten -- Teil 3:
Strahlventilatoren
Règles de sécurité pour les ventilateurs électriques et leurs régulateurs de vitesse --
Partie 3: Ventilateurs de jet
Ta slovenski standard je istoveten z: HD 280.3 S1:1990
ICS:
23.120 =UDþQLNL9HWUQLNL.OLPDWVNH Ventilators. Fans. Air-
QDSUDYH conditioners
SIST HD 280.3 S1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 280.3 S1:1999

---------------------- Page: 2 ----------------------

SIST HD 280.3 S1:1999

---------------------- Page: 3 ----------------------

SIST HD 280.3 S1:1999

---------------------- Page: 4 ----------------------

SIST HD 280.3 S1:1999

---------------------- Page: 5 ----------------------

SIST HD 280.3 S1:1999

---------------------- Page: 6 ----------------------

SIST HD 280.3 S1:1999

---------------------- Page: 7 ----------------------

SIST HD 280.3 S1:1999

--
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60335-2-40:2023/A11:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN IEC 60335-2-40:2023/A11:2023

NEXT ACTION: CCMC ACTION to request HAS assessment @ PUB once HAS system is operational
2019-12-10 CV: prEN IEC 60335-2-40 (PR=67783) to be published togther with EN IEC 60335-2-40/PRA11 (PR=67817)

  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-40:2023(Main)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2018)
EN IEC 60335-2-40:2023

This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric heat pumps, including sanitary hot
water heat pumps, air conditioners, and dehumidifiers incorporating motor-compressors
and hydronic fan coils units, their maximum rated voltages being not more than 250 V for
single phase appliances and 600 V for all other appliances. Partial units are within the scope
of this International Standard.
Appliances not intended for normal household use but which nevertheless may be a source of
danger to the public, such as appliances intended to be used by laymen in shops, in light
industry and on farms, are within the scope of this standard.
The appliances referenced above may consist of one or more factory-made assemblies. If
provided in more than one assembly, the separate assemblies are to be used together, and
the requirements are based on the use of matched assemblies.
NOTE 101 A definition of ‘motor-compressor’ is given in IEC 60335-2-34, which includes the statement that the
term motor-compressor is used to designate either a hermetic motor-compressor or semi-hermetic motor-
compressor.
NOTE 102 Requirements for refrigerating safety are covered by ISO 5149-1, ISO 5149-2, and ISO 5149-3.
Requirements for containers intended for storage of the heated water included in sanitary hot water heat pumps
are, in addition, covered by IEC 60335-2-21.
This standard does not take into account refrigerants other than group A1, A2L, A2 and A3 as
defined by ISO 817 classification, A2L refrigerants are limited to those of a molar mass of
more than or equal to 42 kg/kmol based on WCF – Worst Case Formulation as specified in
ISO 817.
This standard specifies particular requirements for the use of flammable refrigerants. Unless
specifications are covered by this standard, including the annexes, requirements for
refrigerating safety are covered by ISO 5149.
The parts of ISO 5149 of particular concern to this standard are as follows:
• ISO 5149-1:2014, Refrigerating systems and heat pumps – Safety and environmental
requirements – Part 1: Definitions, classification and selection criteria.
• ISO 5149-2, Refrigerating systems and heat pumps – Safety and environmental
requirements – Part 2: Design, construction, testing, marking and documentation;
• ISO 5149-3:2014, Refrigerating systems and heat pumps – Safety and environmental
requirements – Part 3: Installation site.
Supplementary heaters, or a provision for their separate installation, are within the scope of
this standard, but only heaters which are designed as a part of the appliance package, the
controls being incorporated in the appliance.
NOTE 103 Attention is drawn to the fact that
• for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be
necessary;
• for appliances subjected to pressure, additional requirements may be necessary;
• in many countries, additional requirements are specified, for example, by the national health authorities
responsible for the protection of labour and the national authorities responsible for storage, transportation,
building constructions and installations.
NOTE 104 This standard does not apply to
• humidifiers intended for use with heating and cooling equipment (IEC 60335-2-88);
• appliances designed exclusively for industrial processing;
• appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas).

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15218:2023(Main)
Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements
EN 15218:2022

This document specifies the terms, definitions, test conditions, test methods and requirements for rating the performance of air conditioners and liquid chilling packages, with electrically driven compressors and with evaporatively cooled condenser when used for space cooling. The evaporatively cooled condenser is cooled by air and by the evaporation of external additional water. This additional external water is fed by a specific water supply circuit or by a water tank.
This document does not apply to air-to-air and air-to-water air conditioners with a condenser cooled by air and by the evaporation of water condensed on their evaporator.
This document applies to units equipped with a water tank or with a continuous water circuit supply that can also operate without water feeding. However, this document only concerns the testing of these units with water feeding.
This document applies to factory-made units which can be ducted.
This document applies to factory-made units of either fixed capacity or variable capacity by any means.
Packaged units, single split and multisplit systems are covered by this document.
With regard to units consisting of several parts, this document applies only to those designed and supplied as a complete package.
For evaporatively cooled condenser units that can also operate in heating mode, their performance in this mode is determined according to EN 14511 (all parts).
Installations used for industrial processes cooling are not within the scope of this document.
This document specifies the conditions for which performance data will be declared for compliance to the Ecodesign Regulation 206/2012 and to the Energy Labelling Regulation 626/2011 of air conditioners with evaporatively cooled condenser in cooling mode.
NOTE   All the symbols given in this text can be used regardless of language.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13349-1:2022(Main)
Fans - Vocabulary and definitions of categories - Part 1: Vocabulary (ISO 13349-1:2022)
EN ISO 13349-1:2022

This document defines terms in the field of fans used for all purposes.
It is not applicable to electrical safety.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13349-2:2022(Main)
Fans - Vocabulary and definitions of categories - Part 2: Categories (ISO 13349-2:2022)
EN ISO 13349-2:2022

This document defines categories in the field of fans used for all purposes.
It is not applicable to electrical safety.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-65:2003/A2:2022(Amendment)
Household and similar electrical appliances - Safety -- Part 2-65: Particular requirements for air-cleaning appliances
EN 60335-2-65:2003/A2:2022

FprAA to be circulated to cover Common Modifications (see PR=25306)

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60335-2-65:2003/A12:2022(Amendment)
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
EN 60335-2-65:2003/A12:2022

Deals with the safety of electric air-cleaning appliances, their rated voltage being not more than 250 V for single phase and 480 V for other appliances, for household purposes. Also includes appliances intended to be used by laymen in shops, in light industry and on farms.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14511-3:2022(Main)
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods
EN 14511-3:2022

1.1 The scope of EN 14511-1:2022 is applicable.
1.2 This document specifies the test methods for the rating and performance of air conditioners, liquid
chilling packages and heat pumps using either air, water or brine as heat transfer media, with electrically
driven compressors when used for space heating and cooling. These test methods also apply for the rating
and performance of process chillers.
It also specifies the method of testing and reporting for heat recovery capacities, system reduced
capacities and the capacity of individual indoor units of multisplit systems, where applicable.
This document also makes possible to rate multisplit and modular heat recovery multisplit systems by
rating separately the indoor and outdoor units.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14511-2:2022(Main)
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions
EN 14511-2:2022

1.1   The scope of EN 14511 1 is applicable.
1.2   This European Standard specifies the test conditions for the rating of air conditioners, liquid chilling packages and heat pumps, using either, air, water or brine as heat transfer media, with electrically driven compressors when used for space heating and/or cooling. The standard also specifies the test conditions for the rating of air-cooled and water(brine)-cooled process chillers.
1.3   This European Standard specifies the conditions for which performance data is to be declared for single duct and double duct units for compliance to the Ecodesign Regulation 206/2012 and Energy Labelling Regulation 626/2011.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14511-1:2022(Main)
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions
EN 14511-1:2022

This European Standard specifies the terms and definitions for the rating and performance of air conditioners, liquid chilling packages and heat pumps using either air, water or brine as heat transfer media, with electrically driven compressors when used for space heating and/or cooling.
It also specifies the terms and definitions for the rating and performance of process chillers.
This European Standard does not apply to heat pumps for domestic hot water, although certain definitions can be applied to these.
This European Standard applies to:
-   factory-made units that can be ducted,
-   factory-made liquid chilling packages with integral condensers or for use with remote condensers,
-   factory-made units of either fixed capacity or variable capacity by any means, and
-   air-to-air air conditioners which can also evaporate the condensate on the condenser side.
Packaged units, single split and multisplit systems are covered by this standard. Single duct and double duct units are covered by the standard.
In the case of units consisting of several parts, this European Standard applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser.
This European Standard is primarily intended for water and brine chilling packages but can be used for other liquid subject to agreement.
The units having their condenser cooled by air and by the evaporation of external additional water should have their performance in the cooling mode determined in accordance to EN 15218. For those which can also operate in the heating mode, the EN 14511 series applies for the determination of their performance in the heating mode.
NOTE 1   Part load testing of units is dealt with in EN 14825.
NOTE 2   All the symbols given in this text are used regardless of the language.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day