kSIST FprEN 17321:2020

Intermodal loading units and commercial vehicles - Transport stability of packages - Minimum requirements and tests

The transport stability of packages is a vital part of transport safety and the possibility of securing the cargo on different types of Cargo Transport Units (CTUs). This European standard specifies the requirements and different methods for testing the transport stability of packages.
A package means the complete product of the packing operation, consisting of the packaging and its contents prepared for transport.
The transport stability of the packages is divided to different levels depending on the capability to withstand the forces during the transport. This transport stability of the packages requires different types of CTUs and/or securing methods to obtain a safe cargo securing during the entire transport.
Before the package is prepared for the transport it can be defined as a handling unit without any transport packaging material to obtain transport stability. The minimum requirement for the stability of the handling unit is set to obtain a safe handling both before and after the transport.
The aim of the different test methods is to define the Transport Stability Level (TSL) of a package or handling unit.

Intermodale Ladeeinheiten und Nutzfahrzeuge - Transportstabilität von Packstücken - Mindestanforderungen und Prüfungen

Unités de chargement intermodales et véhicules utilitaires - Stabilité au transport des colis - Exigences minimales et essais

Intermodalne nakladalne enote in gospodarska vozila - Transportna stabilnost tovorov - Minimalne zahteve in preskusi

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Intermodalne nakladalne enote in gospodarska vozila - Transportna stabilnost tovorov - Minimalne zahteve in preskusiIntermodale Ladeeinheiten und Nutzfahrzeuge - Transportstabilität von Packstücken - Mindestanforderungen und PrüfungenUnités de chargement intermodales et véhicules utilitaires - Stabilité au transport des colis - Exigences minimales et essaisIntermodal loading units and commercial vehicles - Transport stability of packages - Minimum requirements and tests55.180.01Distribucija blaga s prevozom na splošnoFreight distribution of goods in generalICS:Ta slovenski standard je istoveten z:prEN 17321oSIST prEN 17321:2019en,fr,de01-januar-2019oSIST prEN 17321:2019SLOVENSKI

STANDARD
oSIST prEN 17321:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
DRAFT prEN 17321
November
t r s z ICS
w wä s z rä r s English Version

Intermodal loading units and commercial vehicles æ Transport stability of packages æ Minimum requirements and tests Unités de chargement intermodales et véhicules utilitaires æ Stabilité au transport des colis æ Exigences minimales et essais

Intermodale Ladeeinheiten und Nutzfahrzeuge æ Transportstabilität von Packstücken æ Mindestanforderungen und Prüfungen This draft European Standard is submitted to CEN members for enquiryä It has been drawn up by the Technical Committee

If this draft becomes a European Standardá CEN members are bounwhich stipulate the conditions for giving this European Standard the status of a national standard without any alterationä

This draft European Standard was established by CEN in three ofer language made by translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä

Recipients of this draft are invited to submitá with their commentsá notification of any relevant patent rights of which they are aware and to provide supporting documentationä

Warning ã This document is not a European Standardä It is distributed for review and commentsä It is subject to change without notice and shall not be referred to as a European Standardä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels

t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä prEN

s y u t sã t r s z EoSIST prEN 17321:2019
prEN 17321:2018 (E) 2 Contents Page

European foreword ....................................................................................................................................................... 3 1 Scope .................................................................................................................................................................... 4 2 Normative references .................................................................................................................................... 4 3 Terms and definitions ................................................................................................................................... 4 4 Requirements, test methods and evaluation ........................................................................................ 5 4.1 General requirements ................................................................................................................................... 5 4.2 Test methods .................................................................................................................................................... 6 4.3 Evaluation .......................................................................................................................................................... 7 5 Procedure........................................................................................................................................................... 7 6 Marking ............................................................................................................................................................... 7 7 Documentation ................................................................................................................................................. 8 Annex A (normative)

Dynamic deceleration test........................................................................................... 10 A.1 Apparatus / Test device ............................................................................................................................. 10 A.1.1 General ............................................................................................................................................................. 10 A.1.2 Acceleration/deceleration measuring device ................................................................................... 10 A.2 Machine setting ............................................................................................................................................. 11 Annex B (informative)

Dynamic deceleration test sketches ..................................................................... 12 B.1 Dynamic deceleration test - Design of test device with inclination of the track ................... 12 B.2 Dynamic deceleration test - Design of test device with a horizontal movement .................. 12 Annex C (informative)

Static test sketches ...................................................................................................... 13 C.1 Static test according to EN 12195-1:2010 ........................................................................................... 13 C.2 Static test - Test of handling unit stability for handling purposes ............................................. 13

oSIST prEN 17321:2019

prEN 17321:2018 (E) 3 European foreword This document (prEN 17321:2018) has been prepared by Technical Committee CEN/TC 119 “Intermodal Loading Units and Cargo Securing”, the secretariat of which is held by DIN. This document is currently submitted to the CEN Enquiry. oSIST prEN 17321:2019

prEN 17321:2018 (E) 4 1 Scope The transport
...