SIST EN 10130:1997
(Main)Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
[As modified by Amendment A1 :1998] This European Standard applies to cold-rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless otherwise agreed at the time of the order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does not apply to cold-rolled narrow strip (rolling width < 600 mm) nor to flat cold-rolled products for which there is a specific standard in particular the following: - cold-rolled non-grain oriented magnetic steel sheet and strip (EN 10106); - semi-processed steel strip for the construction or magnetic circuits CEN 10126 and EN 10165); - blackplate in coils (EN 10205); - steel sheet and strip for welded gas cylinders (EN 10120); - hot-rolled flat products in high yield strength steels for cold forming EN 10149-2-3); - cold-rolled flat products in high yield strength steels for cold forming (prEN 10268); - cold-rolled uncoated non alloy mild steel narrow strip for cold forming (pr EN 10139); - cold-rolled low carbon steel flat products for vitreous enamelling (EN 10209); - cold-rolled structural steels for general purposes.
Kaltgewalzte Flacherzeugnisse aus weichen Stählen zum Kaltumformen - Technische Lieferbedingungen
Diese Europäische Norm gilt für kaltgewalzte Flacherzeugnisse ohne Überzug in Walzbreiten >= 600 mm und Dicken von 0,35 bis - sofern bei der Bestellung nichts anderes vereinbart wird - 3 mm aus weichen Stählen, die zum Kaltumformen bestimmt sind und als Blech, Breitband, längsgeteiltes Breitband oder Stäbe aus längsgeteiltem Breitband oder Blech geliefert werden.
Produits plats laminés a froid, en acier doux pour emboutissage au pliage a froid - Conditions techniques de livraison
La présente Norme européenne est applicable aux produits plats laminés a froid, non revetus, de largeur supérieure ou égale a 600 mm, d'épaisseur au moins égale a 0,35 mm et, sauf accord a la commande, inférieure ou égale a 3 mm, en acier doux, destinés a l'emboutissage ou au pliage froid, livrés en tôles, larges bandes, larges bandes refendues, barres obtenues a partir de larges bandes refendues ou de tôles.
Hladno valjani ploščati izdelki iz maloogljičnih jekel za preoblikovanje v hladnem - Tehnični dobavni pogoji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgewalzte Flacherzeugnisse aus weichen Stählen zum Kaltumformen - Technische LieferbedingungenProduits plats laminés a froid, en acier doux pour emboutissage au pliage a froid - Conditions techniques de livraisonCold rolled low carbon steel flat products for cold forming - Technical delivery conditions77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 10130:1991SIST EN 10130:1997en01-dece
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.