SIST EN 10335:2025
(Main)Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
This document specifies the base steel to be used and the composition of the metallic coating to be used for the manufacture of lacquered electrolytic chromium/chromium oxide coated steel and articles which, as a finished product, are intended for use in direct contact with foodstuffs or products for human or animal consumption.
The main examples of use are:
- drinks cans,
- food cans,
- closures and ends.
The material should be chosen in accordance with the conditions for its use.
This standard does not apply to categories of steel other than steel for packaging intended for use in contact with foodstuffs, products or beverages for human consumption or animal consumption.
Verpackungsblech - Flacherzeugnisse aus Stahl für die Verwendung in Berührung mit Lebensmitteln, Produkten und Getränken für den menschlichen und tierischen Verzehr - Unlegierter elektrolytisch spezialverchromter Stahl
Dieses Dokument legt den Stahl und die Zusammensetzung des metallischen Überzugs fest, der für die Herstellung von elektrolytisch spezialverchromtem Stahl und Gegenständen verwendet wird, welche als fertiges Produkt für die Verwendung in direkter Berührung mit Lebensmitteln oder Produkten für den menschlichen und tierischen Verzehr bestimmt sind.
Hauptbeispiele für die Anwendung sind:
- Getränkedosen;
- Konserven;
- Verschlüsse und Enden.
Die Stahlsorte muss in Übereinstimmung mit ihrer Verwendung ausgesucht werden.
Diese Norm ist nicht anwendbar auf andere Stähle als die für Verpackungsblech in Berührung mit Lebensmitteln, Produkten oder Getränken für den menschlichen oder tierischen Verzehr.
Acier pour emballage - Produits plats en acier destiné à entrer au contact des denrées, produits et boissons pour l'alimentation de l'homme et des animaux - Acier non allié revêtu de chrome
Le présent document spécifie l’acier à utiliser et la composition du revêtement métallique servant à la fabrication de fer chromé verni et d’objets qui à l’état de produit fini sont destinés à entrer en contact direct avec des denrées, et produits pour l’alimentation de l’homme et des animaux.
Les principaux exemples d’application sont les suivants :
- boîtes boissons ;
- boîtes pour conserves alimentaires ;
- capsules et couvercles.
Le choix du matériau est en adéquation avec les conditions d’emploi.
Le présent document ne s’applique pas aux catégories d’aciers hors emballages destinés à entrer en contact avec des denrées, produits et boissons pour l’alimentation de l’homme et des animaux.
Jekla za embalažo - Ploščati jekleni izdelki za uporabo v stiku s hrano, pijačami in drugimi izdelki za ljudi in živali - Nelegirana pločevina, galvansko prekrita s kromom/kromovim oksidom
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Jekla za embalažo - Ploščati jekleni izdelki za uporabo v stiku s hrano, pijačami in
drugimi izdelki za ljudi in živali - Nelegirana pločevina, galvansko prekrita s
kromom/kromovim oksidom
Steel for packaging - Flat steel products intended for use in contact with foodstuffs,
products or beverages for human and animal consumption - Non alloyed electrolytic
chromium/chromium oxide coated steel
Verpackungsblech - Flacherzeugnisse aus Stahl für die Verwendung in Berührung mit
Lebensmitteln, Produkten und Getränken für den menschlichen und tierischen Verzehr -
Unlegierter elektrolytisch spezialverchromter Stahl
Acier pour emballage - Produits plats en acier destiné à entrer au contact des denrées,
produits et boissons pour l'alimentation de l'homme et des animaux - Acier non allié
revêtu de chrome
Ta slovenski standard je istoveten z: EN 10335:2024
ICS:
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 10335
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 67.250; 77.140.50 Supersedes EN 10335:2005
English Version
Steel for packaging - Flat steel products intended for use in
contact with foodstuffs, products or beverages for human
and animal consumption - Non alloyed electrolytic
chromium/chromium oxide coated steel
Acier pour emballage - Produits plats en acier destiné à Verpackungsblech - Flacherzeugnisse aus Stahl für die
entrer au contact des denrées, produits et boissons Verwendung in Berührung mit Lebensmitteln,
pour l'alimentation de l'homme et des animaux - Acier Produkten und Getränken für den menschlichen und
non allié revêtu de chrome/oxyde de chrome tierischen Verzehr - Unlegierter elektrolytisch
électrolytique spezialverchromter Stahl
This European Standard was approved by CEN on 23 October 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10335:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Information to be provided by the purchaser . 5
5 Dimensions and dimensional tolerances . 5
6 Requirements . 5
6.1 Base metal . 5
6.2 Chromium coating . 7
6.3 Oiling . 7
7 Checks . 7
8 Designation . 7
9 Marking, labelling, packaging . 7
Bibliography . 8
European foreword
This document (EN 10335:2024) has been prepared by Technical Committee CEN/TC 459 “ECISS –
European Committee for Iron and Steel Standardization” , the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025 and conflicting national standards shall be
withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 10335:2005.
The main changes compared to the previous edition are listed below:
— the normative references have been updated;
— definitions 3.1, 3.2, 3.3, 3.4, 3.5 have been updated;
— a note has been added in 6.1;
— Clauses 7 and 8 have been updated;
— the Bibliography has been updated.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries ar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.