iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 9227-1:2024

(Main)

Aerospace series - Programme management - Guide to dependability and safety control

Aerospace series - Programme management - Guide to dependability and safety control

The success of a programme depends on optimizing the compromise between the expected technical and operational performance of the products, the cost of these products and the lead-time to realize them.
In this context, products dependability and safety control is a key activity which cannot be separated from other product performance control or programme management.
This document is thus one of the documents supporting EN 9200 concerning the programme management specification.
The purpose of this document is to provide customers and their suppliers with a document specifying the notions of "construction" and "management" of product dependability and safety (RAMS).
It offers programme directors and project managers information likely to help them:
-   determine the tasks to be performed and the application procedures, according to the specific nature of the programme and its goals;
-   define and implement the provisions necessary for performing these tasks;
-   within programme execution, situate the various tasks involved in constructing and managing the RAMS of a product.
This document applies to all programmes that involve customer/supplier relation.
RAMS management concerns not only all the products covered by these programmes, but also the components of these products and the production and support resources and processes to be implemented.
The provisions of this document can be negotiated at all levels between the parties directly concerned by a given programme. This implies, on the part of the ordering parties, that each lower level is provided with the information needed to perform the tasks and meet the specified targets. This also implies, on the part of suppliers, an escalation of information pertaining to the RAMS results of the products for which they are responsible.
This document is mainly concerned with the technical aspects, aspects of a legislative (in particular safety at work and regulatory conformity) and confidential nature are not dealt with in this document.

Luft- und Raumfahrt - Programm-Management - Richtlinien für die RAMS-Management

Série aérospatiale - Management de programme - Guide pour la maîtrise de la sûreté de fonctionnement

Aeronavtika - Upravljanje programa - Vodilo za nadzor zanesljivosti in varnosti

General Information

Status
Not Published
Public Enquiry End Date
02-Jul-2024
ICS
49.140 - Space systems and operations
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
23-Apr-2024
Due Date
10-Sep-2024
Ref Project
prEN 9227-1 - Aerospace series - Programme management - Guide to dependability and safety control

Buy Standard

prEN 9227-1:2024 - BARVEprEN 9227-1:2024 - BARVE
PreviousNext
Draft
prEN 9227-1:2024 - BARVE
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 9227-1:2024
01-junij-2024
Aeronavtika - Upravljanje programa - Vodilo za nadzor zanesljivosti in varnosti
Aerospace series - Programme management - Guide to dependability and safety control
Luft- und Raumfahrt - Programm-Management - Richtlinien für die RAMS-Management
Série aérospatiale - Management de programme - Guide pour la maîtrise de la sûreté de
fonctionnement
Ta slovenski standard je istoveten z: prEN 9227-1
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
oSIST prEN 9227-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 9227-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN 9227-1:2024


DRAFT
EUROPEAN STANDARD
prEN 9227-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2024
ICS 49.140
English Version

Aerospace series - Programme management - Guide to
dependability and safety control
Série aérospatiale - Management de programme - Luft- und Raumfahrt - Programm-Management -
Guide pour la maîtrise de la sûreté de fonctionnement Richtlinien für die RAMS-Management
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 9227-1:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 9227-1:2024
prEN 9227-1:2024 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 List of acronyms . 9
5 Fundamental notions and principles . 11
6 Organisational provisions . 12
6.1 RAMS positioning in relation to the programme . 12
6.2 RAMS resources . 13
6.3 Distribution of the responsibilities for RAMS . 14
6.3.1 Responsibilities of the customer . 14
6.3.2 Responsibilities of the users .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16604-10:2024(Main)
Space sustainability - Space debris mitigation requirements (ISO 24113:2023, modified)
EN 16604-10:2023

This document defines the primary space debris mitigation requirements applicable to all elements of systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft and any objects released as part of normal operations or disposal actions.
The requirements contained in this document are intended to reduce the growth of space debris by ensuring that spacecraft and launch vehicle orbital stages are designed, operated and disposed of in a manner that prevents them from generating debris throughout their orbital lifetime.
This document is the top-level standard in a family of standards addressing debris mitigation. It will be the main interface for the user, bridging between the primary debris mitigation requirements and the lower-level implementation standards that will ensure compliance.
This document does not cover launch phase safety for which specific rules are defined elsewhere.
This document identifies the clauses and requirements (including notes and clarifications) modified or added with respect to the standard ISO 24113, Space systems - Space debris mitigation requirements, Third edition 2019-07 (referred to as ISO 24113:2019) for application of the European Space standard based on ECSS.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-20-40:2024(Main)
Space engineering - ASIC, FPGA and IP Core engineering
EN 16603-20-40:2023

This standard specifies a comprehensive set of engineering requirements for the
successful development of digital, analogue and mixed analogue-digital signal
custom designed integrated circuits, such as application specific integrated
circuits (ASICs), field programmable gate arrays (FPGAs) and Intellectual
Property Cores (IP Cores), from now on referred to with the single and generic
term DEVICEs.
Microelectronics systems created by more than one DEVICE die but that are
interconnected and packaged together as a single DEVICE are not considered
single monolithic DEVICEs. However ECSS-ST-20-40 is to be applied to (a) the
development of each individual monolithic die, (b) also for their integration onto
a multi-die single DEVICE considering those dice as IP Cores.
This standard may be tailored for the specific characteristic and constraints of a
space project in conformance with ECSS-S-ST-00. A pre-tailoring based on the
actual DEVICE type and criticality category of the DEVICE is addressed in
clause 5.1.2.
This standard does not cover requirements for the selection, control, procurement
or usage of DEVICEs for space projects nor DEVICE ESCC qualification
requirements, as those requirements are covered by ECSS-Q-ST-60C EEE
components standard and the ESCC generic specification No. 9000 respectively.
Nevertheless, this standard contemplates the possibility for the DEVICE to
undergo ESCC qualification after the DEVICE customer acceptance as an ECSS
qualified DEVICE, and thus a DEVICE ESCC Detail Specification and DEVICE
Radiation Test Plan and Report are optional expected outputs.

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-20:2024(Main)
Space engineering - Electrical and electronic
EN 16603-20:2023

This Standard establishes the basic rules and general principles applicable to the
electrical, electronic, electromagnetic, microwave and engineering processes. It
specifies the tasks of these engineering processes and the basic performance and
design requirements in each discipline.
It defines the terminology for the activities within these areas.
It defines the specific requirements for electrical subsystems and payloads,
deriving from the system engineering requirements laid out in ECSS-E-ST-10
“Space engineering – System engineering general requirements”.
This standard may be tailored for the specific characteristics and constrains of a
space project in conformance with ECSS-S-ST-00.

  • Standard
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-20-08:2023(Main)
Space engineering - Photovoltaic assemblies and components
EN 16603-20-08:2023

This Standard specifies the general requirements for the qualification, procurement, storage and delivery of photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes suitable for space applications.
This standard does not cover the particular qualification requirements for a specific mission.
This Standard primarily applies to qualification approval for photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes, and to the procurement of these items.
This standard is limited to crystaline Silicon and single and multi-junction GaAs solar cells with a thickness of more than 50 m and does not include thin film solar cell technologies and poly-crystaline solar cells.
This Standard does not cover the concentration technology, and especially the requirements related to the optical components of a concentrator (e.g. reflector and lens) and their verification (e.g. collimated light source).
This Standard does not apply to qualification of the solar array subsystem, solar panels, structure and solar array mechanisms.

  • Standard
    230 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16602-60-13:2023(Main)
Space product assurance - Commercial electrical, electronic and electromechanical (EEE) components
EN 16602-60-13:2023

This standard defines the requirements for selection, control, procurement and
usage of EEE commercial components for space projects.
This standard is applicable to commercial parts from the following families:
• Ceramic capacitors chips
• Solid electrolyte tantalum capacitors chips
• Discrete parts (transistors, diodes, optocouplers)
• Fuses
• Magnetic parts
• Microcircuits
• Resistors chips
• Thermistors
In addition for families of EEE components not addressed by the present ECSS
standard, it can be used as guideline on case by case basis.
The requirements of this document are applicable to all parties involved at all
levels in the integration of EEE commercial components into space segment
hardware and launchers.
This standard may be tailored for the specific characteristics and constrains of a
space project in conformance with ECSS-S-ST-00

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16602-70-40:2023(Main)
Space product assurance - Processing and quality assurance requirements for hard brazing of metallic materials for flight hardware
EN 16602-70-40:2023

This Standard specifies the processing and quality assurance requirements for
brazing processes for space flight applications. Brazing is understood as the
joining and sealing of materials by means of a solidification of a liquid filler
metal.
The term brazing in this standard is used as equivalent to soldering, in cases that
the filler materials have liquidus temperatures below 450 °C.
Brazing and soldering are allied processes to welding and this standard is
supplementing the standard for welding ECSS-Q-ST-70-39.
This standard does not cover requirements for:
• Joining processes by adhesive bonding (ECSS-Q-ST-70-16),
• Soldering for electronic assembly purposes (ECSS-Q-ST-70-61),
• Soldering used in hybrid manufacturing (ESCC 2566000).
The standard covers but is not limited to the following brazing processes:
• Torch brazing,
• Furnace brazing,
• Dip Brazing and Salt-bath brazing,
• Induction Brazing.
This Standard does not detail the brazing definition phase and brazing pre-
verification phase, including the derivation of design allowables.
This standard may be tailored for the specific characteristic and constraints of a
space project in conformance with ECSS-S-ST-00.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16602-60:2023(Main)
Space product assurance - Electrical, electronic and electromechanical (EEE) components
EN 16602-60:2023

This standard defines the requirements for selection, control, procurement and usage of EEE components for space projects.
This standard differentiates between three classes of components through three different sets of standardization requirements (clauses) to be met.
The three classes provide for three levels of trade-off between assurance and risk. The highest assurance and lowest risk is provided by class 1 and the lowest assurance and highest risk by class 3. Procurement costs are typically highest for class 1 and lowest for class 3. Mitigation and other engineering measures may decrease the total cost of ownership differences between the three classes. The project objectives, definition and constraints determine which class or classes of components are appropriate to be utilised within the system and subsystems.
a.   Class 1 components are described in Clause 4.
b.   Class 2 components are described in Clause 5
c.   Class 3 components are described in Clause 6.
The requirements of this document apply to all parties involved at all levels in the integration of EEE components into space segment hardware and launchers.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16602-70-61:2022(Main)
Space product assurance - High-reliability soldering for surface mount, mixed technology and hand-mounted electrical connections
EN 16602-70-61:2022

This standard defines:
- the basic requirements for the verification and approval of automatic machine w ave soldering for use in spacecraft hardware. The process requirements for w ave soldering of doublesided and multilayer boards are also defined.
- the technical requirements and quality assurance provisions for the manufacture and verification of manuallysoldered, high-reliability electrical connections.
- the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits based on surface mounted device (SMD) and mixed technology.
- the acceptance and rejection criteria for high reliability manufacture of manually-soldered electrical connections intended to w ithstand normal terrestrial conditions and the vibrational g-loads and environment imposed by space flight.
- the proper tools, correct materials, design and w orkmanshipt. Workmanship standards are included to permit discrimination betw een proper and improper work.
SCOPE
This Standard defines the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
The Standard defines w orkmanship requirements, the acceptance and rejection criteria for high-reliability assemblies intended to withstand normal terrestrial conditions and the environment imposed by space flight.
The mounting and supporting of components, terminals and conductors specified in this standard applies only to assemblies designed to continuously operate over the mission w ithin the temperature limits of -55 °C to +85 °C at solder joint level.
Requirements related to printed circuit boards are contained in ECSS-Q-ST-70-60 (equivalent to EN 16602-70-60) and ECSS-Q-ST-70-12 (equivalent to EN 16602-70-12).
This Standard does not cover the qualification and acceptance of the EQM and FM equipment w ith high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
This Standard does not cover verification of thermal properties for component assembly.
This Standard does not cover pressfit connectors.
The qualification and acceptance tests of equipment manufactured in accordance w ith this Standard are covered by ECSS-EST-10-03 (equivalent to EN 16603-10-03).

  • Standard
    253 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-10-03:2022(Main)
Space engineering - Testing
EN 16603-10-03:2022

This standard addresses the requirements for performing verification by testing of space segment elements and space segment equipment on ground prior to launch. The document is applicable for tests performed on qualification models, flight models (tested at acceptance level) and protoflight models.
The standard provides:
• Requirements for test programme and test management,
• Requirements for retesting,
• Requirements for redundancy testing,
• Requirements for environmental tests,
• General requirements for functional and performance tests,
NOTE Specific requirements for functional and performance tests are not part of this standard since they are defined in the specific project documentation.
• Requirements for qualification, acceptance, and protoflight testing including qualification, acceptance, and protofight models’ test margins and duration,
• Requirements for test factors, test condition, test tolerances, and test accuracies,
• General requirements for development tests pertinent to the start of the qualification test programme,
NOTE Development tests are specific and are addressed in various engineering discipline standards.
• Content of the necessary documentation for testing activities (e.g. DRD).
Due to the specific aspects of the follow ing types of test, this Standard does not address:
• Space system testing (i.e. testing above space segment element), in particular the system validation test,
• In-orbit testing,
• Testing of space segment subsystems,
NOTE Tests of space segment subsystems are often limited to functional tests that, in some case, are run on dedicated models. If relevant, qualification tests for space segment subsystems are assumed to be covered in the relevant discipline standards.
Testing of hardware below space segment equipment levels (including assembly, parts, and components),
• Testing of stand-alone software,
NOTE For verification of flight or ground softw are, EN 16603-40 (ECSS-E-ST-40) and EN 16602-80 (ECSS-Q-ST-80) apply.
• Qualification testing of tw o-phase heat transport equipment,
NOTE For qualification testing of tw o-phase heat transport equipment, EN 16603-31-02 (ECSS-E-ST-31-02) applies.
• Tests of launcher segment, subsystem and equipment, and launch facilities,
• Tests of facilities and ground support equipment,
• Tests of ground segment.
This activity will be the update of EN16603-10-03:2014
NOTE: Parallel development of update of EN Standard and the new European TR17603-10-03.

  • Standard
    132 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16603-20-07:2022(Main)
Space engineering - Electromagnetic compatibility
EN 16603-20-07:2022

EMC policy and general system requirements are specified in ECSS-E-ST-20 (equivalent to EN 16603-20).
This ECSS-E-ST-20-07 (equivalent to EN 16603-20-07) Standard addresses detailed system requirements (Clause 4), general test conditions, verification requirements at system level, and test methods at subsystem and equipment level (Clause 5) as w ell as informative limits (Annex A).
Associated to this standard is ECSS-E-ST-20-06 (equivalent to EN 16603-20-06) "Spacecraft charging", w hich addresses charging control and risks arising from environmental and vehicle-induced spacecraft charging w hen ECSS-E-ST-20-07 addresses electromagnetic effects of electrostatic discharges.
Annexes A to C of ECSS-E-ST-20 document EMC activities related to ECSS-E-ST-20-07: the EMC Control Plan (Annex A) defines the approach, methods, procedures, resources, and organization, the Electromagnetic Effects Verification Plan (Annex B) defines and specifies the verification processes, analyses and tests, and the Electromagnetic Effects Verification Report (Annex C) document verification results. The EMEVP and the EMEVR are the vehicles for tailoring this standard.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day