SIST EN 50144-2-14:1999

Safety of hand-held electric motor operated tools -- Part 2-14: Particular requirements for planers

This clause of Part 1 is applicable except as follows:     1.1 Addition: This standard applies to planers with a cutting width up to 150 mm. NOTE - For planers with a cutting width above 150 mm other requirements may apply.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-14: Besondere Anforderungen an Hobel

Sécurité des outils électroportatifs à moteur -- Partie 2-14: Règles particulières pour les rabots

Safety of hand-held electric motor operated tools - Part 2-14: Particular requirements for planers

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-1999
• Withdrawal Date: 30-Apr-2002
• ICS: 25.080.25 - Planing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-May-2002
• Due Date: 01-May-2002
• Completion Date: 01-May-2002
• Mandate: M/083 - Machinery
• Ref Project: EN 50144-2-14:1996 - Safety of hand-held electric motor operated tools - Part 2-14: Particular requirements for planers

Relations

• Revised: SIST EN 50144-2-14:2002 - Safety of hand-held electric motor operated tools -- Part 2-14: Particular requirements for planers
• Effective Date: 13-May-2010
• Replaced By: SIST EN 50144-2-14:2002 - Safety of hand-held electric motor operated tools -- Part 2-14: Particular requirements for planers
• Effective Date: 29-Jan-2023
• Replaces: SIST HD 400.3M S2:1995 - Hand-held motor operated tools -- Part II: Particular specifications -- Section M: Planers
• Effective Date: 29-Jan-2023
• Replaces: SIST HD 400.3M S2:1995 - Hand-held motor operated tools -- Part II: Particular specifications -- Section M: Planers
• Effective Date: 06-May-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50144-2-14:1999
01-julij-1999
1DGRPHãþD
SIST HD 400.3M S2:1995
Safety of hand-held electric motor operated tools - Part 2-14: Particular
requirements for planers
Safety of hand-held electric motor operated tools -- Part 2-14: Particular requirements for
planers
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-14: Besondere
Anforderungen an Hobel
Sécurité des outils électroportatifs à moteur -- Partie 2-14: Règles particulières pour les
rabots
Ta slovenski standard je istoveten z: EN 50144-2-14:1996
ICS:
25.080.25 6WURML]DSORãþLQVNRREGHODYR Planing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50144-2-14:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50144-2-14:1999

---------------------- Page: 2 ----------------------

SIST EN 50144-2-14:1999

---------------------- Page: 3 ----------------------

SIST EN 50144-2-14:1999

---------
...