SIST EN IEC 62343-1:2019/oprA1:2023

Amendment 1 - Dynamic modules - Part 1: Performance standards - General conditions

Dynamische Module - Teil 1: Betriebsverhaltensnormen - Allgemeine Bedingungen

Amendement 1 - Modules dynamiques - Partie 1: Normes de performance - Conditions générales

Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 07-Sep-2023
• ICS: 33.180.01 - Fibre optic systems in general
• ICS: 33.180.99 - Other fibre optic equipment
• Technical Committee: MOC - Mobile Communications
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 21-Jun-2023
• Due Date: 08-Nov-2023
• Ref Project: EN IEC 62343-1:2019/prA1:2023 - Amendment 1 - Dynamic modules - Part 1: Performance standards - General conditions

Relations

• Amends: SIST EN IEC 62343-1:2019 - Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2019)
• Effective Date: 13-Dec-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62343-1:2019/oprA1:2023
01-september-2023
Dinamični moduli - 1. del: Tehnični standardi - Splošni pogoji - Dopolnilo A1
Amendment 1 - Dynamic modules - Part 1: Performance standards - General conditions
Dynamische Module - Teil 1: Betriebsverhaltensnormen - Allgemeine Bedingungen
Amendement 1 - Modules dynamiques - Partie 1: Normes de performance - Conditions
générales
Ta slovenski standard je istoveten z: EN IEC 62343-1:2019/prA1:2023
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
SIST EN IEC 62343-1:2019/oprA1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62343-1:2019/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 62343-1:2019/oprA1:2023
86C/1867/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 62343-1/AMD1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-06-16 2023-09-08
SUPERSEDES DOCUMENTS:
86C/1845/CD, 86C/1860/CC

IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Amendment 1 - Dynamic modules - Part 1: Performance standards - General conditions

PROPOSED STABILITY DATE: 2027

NOTE FROM TC/SC OFFICERS:


Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
SIST EN IEC 62343-1:2019/oprA1:2023
IEC CDV 62343-1/A1/Ed2 © IEC:2023 – 2 – 86C/1867/CDV

1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
3
4 DYNAMIC MODULES –
5
6 Part 1: Performance standards – General conditions
7
8 AMENDMENT 1
9
10 FOREWORD
11 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
12 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
13 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
14 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
15 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
16 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
17 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
18 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
19 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
20 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
21 consensus of opinion on the relevant subjects since each technical committee has representation from all
22 interested IEC National Committees.
23 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
24 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
25 Publica
...