Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

This document gives guidelines for the cross wind assessment of railways.
This document is applicable to all passenger vehicles, locomotives and power cars (with a maximum train speed above 140 km/h up to 360 km/h) and freight wagons (with a maximum train speed above 80 km/h up to 160 km/h) and track gauges from 1 435 mm to 1 668 mm inclusive. For passenger vehicles, locomotives and power cars with a maximum train speed between 250 km/h and 360 km/h, a requirement to demonstrate the cross wind stability is imposed. This document is not applicable to light rail and urban rail vehicles.

Bahnanwendungen - Aerodynamik - Teil 6: Anforderungen und Prüfverfahren zur Bewertung von Seitenwind

Applications ferroviaires - Aérodynamique - Partie 6 : Exigences et procédures d'essai pour l'évaluation de la stabilité vis-à-vis des vents traversiers

Železniške naprave - Aerodinamika - 6. del: Zahteve in preskusni postopki za oceno vpliva bočnega vetra - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
31-Oct-2020
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
23-Jun-2022
Due Date
28-Jun-2022
Completion Date
23-Jun-2022

Relations

Buy Standard

Draft
EN 14067-6:2018/oprA1:2020
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14067-6:2018/oprA1:2020
01-oktober-2020
Železniške naprave - Aerodinamika - 6. del: Zahteve in preskusni postopki za
oceno vpliva bočnega vetra - Dopolnilo A1
Railway applications - Aerodynamics - Part 6: Requirements and test procedures for
cross wind assessment
Bahnanwendungen - Aerodynamik - Teil 6: Anforderungen und Prüfverfahren zur
Bewertung von Seitenwind
Applications ferroviaires - Aérodynamique - Partie 6 : Exigences et procédures d'essai
pour l'évaluation de la stabilité vis-à-vis des vents traversiers
Ta slovenski standard je istoveten z: EN 14067-6:2018/prA1:2020
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 14067-6:2018/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14067-6:2018/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN 14067-6:2018/oprA1:2020


DRAFT
EUROPEAN STANDARD
EN 14067-6:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
August 2020
ICS 45.060.01
English Version

Railway applications - Aerodynamics - Part 6:
Requirements and test procedures for cross wind
assessment
Applications ferroviaires - Aérodynamique - Partie 6 : Bahnanwendungen - Aerodynamik - Teil 6:
Exigences et procédures d'essai pour l'évaluation de la Anforderungen und Prüfverfahren zur Bewertung von
stabilité vis-à-vis des vents traversiers Seitenwind
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 14067-6:2018. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14067-6:2018/prA1:2020:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14067-6:2018/oprA1:2020
EN 14067-6.2018/prA1:2020 (E)
Contents Page

European foreword . 3
1 Modifications to Annex H, H.3.3 Example Ve
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.