SIST EN ISO 377:2017/oprA1:2025

Steel and steel products - Location and preparation of samples and test pieces for mechanical testing - Amendment 1 (ISO 377:2017/DAM 1:2024)

Stahl und Stahlerzeugnisse - Lage und Vorbereitung von Probenabschnitten und Proben für mechanische Prüfungen - Änderung 1 (ISO 377:2017/DAM 1:2024)

Acier et produits en acier - Position et préparation des échantillons et éprouvettes pour essais mécaniques - Amendement 1 (ISO 377:2017/DAM 1:2024)

Jeklo in jekleni izdelki - Lokacija in priprava vzorcev ter preskušancev za mehansko preskušanje - Dopolnilo A1 (ISO 377:2017/DAM 1:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 26-Jan-2025
• ICS: 77.040.10 - Mechanical testing of metals
• ICS: 77.140.01 - Iron and steel products in general
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 14-Nov-2024
• Due Date: 03-Apr-2025
• Ref Project: EN ISO 377:2017/prA1 - Steel and steel products - Location and preparation of samples and test pieces for mechanical testing - Amendment 1 (ISO 377:2017/DAM 1:2024)

Relations

• Amends: SIST EN ISO 377:2017 - Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
• Effective Date: 01-May-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2025
Jeklo in jekleni izdelki - Lokacija in priprava vzorcev ter preskušancev za
mehansko preskušanje - Dopolnilo A1 (ISO 377:2017/DAM 1:2024)
Steel and steel products - Location and preparation of samples and test pieces for
mechanical testing - Amendment 1 (ISO 377:2017/DAM 1:2024)
Stahl und Stahlerzeugnisse - Lage und Vorbereitung von Probenabschnitten und Proben
für mechanische Prüfungen - Änderung 1 (ISO 377:2017/DAM 1:2024)
Acier et produits en acier - Position et préparation des échantillons et éprouvettes pour
essais mécaniques - Amendement 1 (ISO 377:2017/DAM 1:2024)
Ta slovenski standard je istoveten z: EN ISO 377:2017/prA1
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
77.140.01 Železni in jekleni izdelki na Iron and steel products in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 377:2017/DAM 1
ISO/TC 17/SC 20
Steel and steel products — Location
Secretariat: SIS
and preparation of samples and test
pieces for mechanical testing
Voting begins on:
2024-11-05
AMENDMENT 1
Voting terminates on:
2025-01-28
Acier et produits en acier — Position et préparation des
échantillons et éprouvettes pour essais mécaniques
AMENDEMENT 1
ICS: 77.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 377:2017/DAM 1:2024(en)
DRAFT
ISO 377:2017/DAM 1:2024(en)
Amendment
ISO 377:2017/DAM 1
ISO/TC 17/SC 20
Steel and steel products — Location
Secretariat: SIS
and preparation of samples and test
pieces for mechanical testing
Voting begins on:
AMENDMENT 1
Voting terminates on:
Acier et produits en acier — Position et préparation des
échantillons et éprouvettes pour essais mécaniques
AMENDEMENT 1
ICS: 77.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL RE
...