Connectors for electrical and electronic equipment - Tests and measurements - Part 99-003: Endurance test schedules - Test 99c: Test schedule for balanced single-pair connectors separating (unmating) under electrical load

IEC 60512-99-003:2023 is used for the assessment of connectors within the scope of SC 48B that are used in balanced single-pair communication cabling with remote power, in support of e.g., IEEE 802.3 remote powering applications for point-to-point connections.
The object of this document is to detail a test schedule to determine the ability of sets of single-pair connectors as defined in the IEC 63171 series to withstand a minimum of 100 mechanical operations with electrical load, where an electrical current is being passed through the connector in accordance with IEC 60512-9-3 during the separation (unmating) step.
This document does not cover multidrop powering applications of single-pair connectors.

Steckverbinder für elektrische und elektronische Einrichtungen - Prüfungen und Messungen - Teil 99-003: Dauerprüfpläne - Prüfung 99c: Prüfplan für symmetrische einpaarige Steckverbinder, die unter elektrischer Last getrennt werden

Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 99-003: Programmes d’essais d’endurance - Essai 99c: Programme d’essai des connecteurs à une seule paire symétrique lors du désaccouplement sous charge électrique

IEC 60512-99-003:2023 est utilisée pour l’évaluation des connecteurs dans le domaine d’application du SC 48B qui sont utilisés dans le câblage de communication symétrique à paire unique avec alimentation à distance, à l’appui, par exemple, des applications d’alimentation à distance IEEE 802.3 pour les connexions point à point. L’objet du présent document est de détailler un programme d’essai pour déterminer la capacité des ensembles de connecteurs à paire unique tels que définis dans la série CEI 63171 à résister à un minimum de 100 opérations mécaniques avec charge électrique, lorsqu’un courant électrique traverse le connecteur conformément à la CEI 60512-9-3 pendant l’étape de séparation (découplage). Le présent document ne couvre pas les applications d’alimentation multipoint des connecteurs à paire unique.

Konektorji za električno in elektronsko opremo - Preskusi in meritve - 99-003. del: Časovni načrt preskušanja vzdržljivosti - Preskus 99c: Načrt preskušanja za uravnotežene konektorje z enim parom za ločeni (nenamerni) izklop pri električni obremenitvi

General Information

Status
Not Published
Public Enquiry End Date
31-Jan-2023
Technical Committee
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
27-Jul-2023
Due Date
14-Sep-2023
Completion Date
16-Aug-2023

Buy Standard

Draft
prEN IEC 60512-99-003:2023 - BARVE
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60512-99-003:2023
01-januar-2023
Konektorji za električno in elektronsko opremo - Preskusi in meritve - 99-003. del:
Časovni načrt preskušanja vzdržljivosti - Preskus 99c: Načrt preskušanja za
uravnotežene konektorje z enim parom za nenamerni izklop pri električni
obremenitvi
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-
003: Endurance test schedules - Test 99c: Test schedule for balanced single-pair
connectors unmating under electrical load
Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie
99-003: Programmes d’essais d’endurance - Essai 99c: Programme d’essai des
connecteurs à une seule paire symétrique lors du désaccouplement sous charge
électrique
Ta slovenski standard je istoveten z: prEN IEC 60512-99-003:2022
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
oSIST prEN IEC 60512-99-003:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60512-99-003:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60512-99-003:2023
48B/3002/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60512-99-003 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-11-11 2023-02-03
SUPERSEDES DOCUMENTS:
48B/2963/CD, 48B/2987/CC

IEC SC 48B : ELECTRICAL CONNECTORS
SECRETARIAT: SECRETARY:
United States of America Mr Jeffrey Toran
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

SC 65C,ISO/IEC JTC 1/SC 25
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Connectors for electrical and electronic equipment – Tests and measurements – Part 99-003:
Endurance test schedules – Test 99c: Test schedule for balanced single-pair connectors
unmating under electrical load

PROPOSED STABILITY DATE: 2025

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60512-99-003:2023
IEC CDV 60512-99-003 Ed1 © IEC 2022    – 2 –                     48B/3002/CDV

1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms, definitions and acronyms . 5
6 4 General . 6
7 5 Preparation of specimens . 6
8 6 Test circuit requirements . 6
9 6.1 General . 6
10 6.2 Voltage and current . 7
11 6.3 Auxiliary equipment . 7
12 7 Test methods . 8
13 7.1 Mechanical operations with electrical load . 8
14 7.2 Flowing mixed gas corrosion .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.